TOP 10 best mounting saws for metal: rating 2021-2022 and main selection parameters + customer reviews

A mounting (cutting) saw is a practical and reliable device suitable for working with metal of any density.

Easily cuts steel, copper, aluminum and other metals.

With its help, the cut is neat and as precise as possible.

When choosing a saw for metal, it is important to familiarize yourself with its main parameters and compare several options.

How to choose and what to pay attention to?

When choosing a mounting saw, it is important to consider a number of parameters:

• cutting depth - for home use, a depth of up to 7 cm is sufficient, for professional models the figure is up to 20 cm;
• control automation - this system ensures high accuracy and quality of processing, and also does not allow a decrease in the speed of rotation of the disk;
• soft start - almost all modern devices are equipped with this option; its presence guarantees protection against power surges;
• overload control - the presence of this element prevents overheating of equipment under high loads;
• type of disc - the accuracy of the cut depends on its material and size.

Equipment selection criteria

What to look for before buying a circular saw? The following are characteristics that deserve the user's attention:

1. Power. The parameter is largely influenced by the size of the saw blade. The larger the diameter, the higher the power and the more productive the tool. For household purposes, a network device with a power of up to 800 W and a price no more than 8 thousand rubles is suitable. (for example, Skil 5330 LA or Sturm! CS 5060 MS), for regular professional work - from 1500 W (Kolner KCS 190/1900T for 5000 rubles).
2. Possibility of adjusting the intensity of revolutions. A tool with this function will accurately cut metal of any thickness, since the rotation speed of the disk can be increased or decreased. Example - Bosch GKS 55 GCE for 20-22 tr.
3. Depth of cut. Models with an indicator of up to 50 mm will cost 5-12 thousand rubles. (Makita HS 201 DWAE), from 50 to 100 mm - depending on the manufacturer (Evolution Rage-230 with a cutting depth of 84 mm for 32,000, Interskol DP 190/1600 M - from 6 thousand rubles), over 100 mm - at higher prices (for example, Makita 5143 R, 130 mm, for 45-50 tr., Messer CS 320 with the same figure - 52-54 tr.).

Makita circular saw

Stationary models are much more expensive than manual ones, although it cannot be said that they are more multifunctional. However, for small household work, there is no point in buying a bulky stand with a saw at a price of 50 thousand rubles, when you can get by with a manual analogue for 5-7 thousand. Finding good equipment at a good price is easy if you follow the recommendations above. The variety of circular circular saws allows you to find a tool for any wallet. The considered equipment for cutting metal is much more efficient than grinders, so it makes sense to overpay a little and never worry about possible damage to the workpiece.

Finally, a beautiful advertisement for a very expensive Hilti circular saw.

The best mounting saws for metal

BOSCH GCD 12 JL

Assembly saw for quick cutting of metal parts . Features high performance. Working with it is simple and convenient.

The model is equipped with a 2 kW electric motor.

The cutting disc rotates at a speed of 1500 rpm . The device makes cuts 85 mm high and 158 mm wide. The equipment is equipped with a laser for the most accurate cutting according to marks.

There are no sparks during operation . Quick replacement of equipment is possible thanks to the quick-clamping vice.

Characteristics:

• power - 2000 W;
• cutting height - 85 mm;
• disc diameter - 305 mm;
• mounting hole - 25 mm;
• speed - 1500 rpm;
• tilt angle - 45 degrees;
• weight - 20 kg.

Advantages:

• fast cut;
• practically no noise;
• goes well even on rusty metal;
• Suitable for long work.

Flaws:

• the disc becomes dull quickly;
• low location of the vice.

Metabo CS 23-355

The device is suitable for professional tasks thanks to its powerful motor . Can be used to cut aluminum, steel and other metals.

Quickly copes with cutting even dense materials.

The saw is equipped with a 35.5 cm blade . It rotates at speeds of up to 4100 rpm.

You can select the desired cutting depth depending on the material density.

The saw is equipped with a handle for easy carrying and transportation.

Characteristics:

• power - 2300 W;
• cutting height - 125 mm;
• disc diameter - 305 mm;
• mounting hole - 25.4 mm;
• speed - 4100 rpm;
• tilt angle - 45 degrees;
• weight - 16.9 kg.

Advantages:

• powerful engine;
• versatility;
• smooth start;
• rigid hinge.

Flaws:

• cutting angle deviation;
• slight play in the protective casing.

Makita LC1230

Professional equipment with direct drive power of 1.75 kW and a cutting disc with a diameter of 305 mm . These parameters are sufficient for sawing a metal workpiece to a depth of up to 11.5 cm and a width of 15 cm.

The device is connected to a 220 V network using a 2.5-meter cable.

Due to the well-thought-out design, you can quickly change working equipment.

The device weighs 19 kg. The set includes a saw blade and a miter wrench and safety glasses.

Characteristics:

• power - 1750 W;
• cutting height - 115 mm;
• disc diameter - 305 mm;
• mounting hole - 25 mm;
• speed - 1300 rpm;
• tilt angle - 45 degrees;
• weight - 19 kg.

Advantages:

• fast cutting of any metal;
• easy use and maintenance;
• high engine power;
• no sparks

Flaws:

• loud noise;
• heavy.

ELITECH PM 1218

Powerful and efficient equipment for processing metal workpieces . Suitable for personal and professional use.

The model is equipped with a powerful electric motor and a 30.5 cm disc.

Connects to 380 V network . The disk makes up to 5000 revolutions per minute.

The belt drive ensures a smooth start, eliminating engine damage from overloads.

You can adjust the cutting depth . Thanks to the quick-release vice, changing accessories takes just a few seconds.

Characteristics:

• power - 1200 W;
• cutting height - 50 mm;
• disc diameter - 180 mm;
• mounting hole - 22.2 mm;
• speed - 5000 rpm;
• tilt angle - 45 degrees;
• weight - 5.5 kg.

Advantages:

• easy to use;
• versatility;
• perfectly cuts 20x40 pipes;
• does not overheat during long-term operation.

Flaws:

• average quality of the bed;
• slight play in the protective casing.

Makita LW1401

Indispensable equipment for working with steel, copper and other metals . It copes well with sawing workpieces to a depth of up to 70 mm and a width of 233 mm.

It has excellent characteristics, making it suitable for personal and professional use. A well-thought-out handle makes the device ergonomic.

No sparks are generated during operation . The saw is equipped with a 2.2 kW motor and a 25.5 cm blade.

Within a minute, the disc makes up to 3800 revolutions, so it quickly cuts thick workpieces.

Characteristics:

• power - 2200 W;
• cutting height - 70 mm;
• disc diameter - 355 mm;
• mounting hole - 25.4 mm;
• speed - 3800 rpm;
• tilt angle - 45 degrees;
• weight - 16.6 kg.

Advantages:

• power;
• performance;
• speed adjustment;
• high quality disc.

Flaws:

• long cutting of thick-walled profile;
• small warranty from the manufacturer.

ELITECH PM 2535

Indispensable equipment for working with metal . With it, you can quickly and accurately saw workpieces made of ferrous and non-ferrous metal.

The model is intended for home and professional use.

Equipped with a 2.5 kW electric motor and a 35.5 cm disc that makes up to 388 rpm . These parameters are sufficient for cutting the workpiece to a depth of 110 mm.

The saw has a well-thought-out design and is easy to use. Changing the circle takes less than a minute.

Characteristics:

• power - 2500 W;
• cutting height - 110 mm;
• disc diameter - 355 mm;
• mounting hole - 25.4 mm;
• speed - 3800 rpm;
• tilt angle - 45 degrees;
• weight - 18.5 kg.

Advantages:

• protective casing;
• depth adjustment;
• quality circle;
• simple change of equipment.

Flaws:

• slight play;
• Average quality of the bed.

ELITECH PM 3040T

Tool for cutting any metal . Connects to a 380 V network. Quickly makes a cut up to 140 mm deep and 120 mm wide. In a minute the disk makes up to 2800 revolutions.

The operator does not get tired during the work.

Thanks to its well-thought-out design, it is easy to operate the equipment without special skills . There is a cutting depth limiter for precise cutting.

Thanks to the quick-clamping vice, changing equipment takes a minimum of time . Safety is ensured by a protective casing and a locking system against erroneous activation.

Characteristics:

• power - 3000 W;
• cutting height - 140 mm;
• disc diameter - 400 mm;
• mounting hole - 32 mm;
• speed - 2800 rpm;
• tilt angle - 45 degrees;
• weight - 49 kg.

Advantages:

• power;
• big circle;
• suitable for long work;
• thoughtful design.

Flaws:

• heavy weight;
• flimsy belts under the pulleys.

Zitrek PM-1200

The equipment is intended for private construction and for use in small workshops . It has high power, providing fast cutting of dense material.

Withstands severe loads.

Equipped with a metal casing to protect the operator from sparks and a stable frame.

The saw is equipped with a disk with a diameter of 180 mm, which makes up to 5000 revolutions per minute . Thanks to this, cutting through hard metals takes a minimum of time.

Characteristics:

• power - 1200 W;
• cutting height - 50 mm;
• disc diameter - 180 mm;
• mounting hole - 22 mm;
• speed - 5000 rpm;
• tilt angle - 45 degrees;
• weight - 6 kg.

Advantages:

• compactness;
• smooth start;
• light weight;
• high performance.

Flaws:

• suitable for short-term work;
• small clamping of the part when sawing at an angle of 45 degrees.

VORTEX OP-355/2200

A device for quickly and accurately sawing workpieces made of stainless steel, copper and other metals . Made from quality materials that are resistant to mechanical damage.

The model is equipped with an electric motor with a power of 2.2 kW and a disk with a diameter of 355 mm, rotating at speeds of up to 3800 rpm.

The stated cutting depth is 115 mm . The saw is simple and easy to use. Operates from a 220 V network. Connects using a long cord.

Characteristics:

• power - 2200 W;
• cutting height - 115 mm;
• mounting hole - 22 mm;
• speed - 3800 rpm;
• weight - 13.6 kg.

Advantages:

• deep cut;
• simple wheel change;
• convenient use;
• robust design.

Flaws:

• suitable for short-term work;
• It's a little loose.

AEG SMT 355

Equipment for rapid processing of metal blanks . It has an optimal size and requires little space for installation.

Equipped with rubberized feet that reduce vibration and ensure stable fixation of the saw.

Connects to a 220 V network using a 4-meter cable . It is equipped with a 355 mm disc with acceleration up to 3800 rpm.

The spindle lock makes it easy to change accessories, and the protective casing increases the safety of using the device.

Characteristics:

• power - 2300 W;
• cutting height - 125 mm;
• disc diameter - 355 mm;
• mounting hole - 25 mm;
• tilt angle - 45 degrees;
• speed - 3800 rpm;
• weight - 17 kg.

Advantages:

• high-quality disc;
• high performance;
• cutting at an angle;
• high speed.

Flaws:

• lack of soft start;
• heavy weight.

Tool Features

"Circular" is a type of circular saw. It is used for cutting metal sheets, rods, pipes, fittings. Powered by an electric motor. The tool is submersible, that is, it cuts metal not only from the edge of the material, but from an arbitrary point.

The design of the products is such that it can be easily disassembled when parts need to be replaced or serviced. The only element that requires regular replacement is the cutting disc. It is made of alloy steel with tungsten admixture. Although the need to change the disk is dictated by the frequency and intensity of work.

Metal circular device

The introduction of the electric motor and the ability to replace the reciprocating motion of the cutting blade with a circular one decades ago made the metal circular saw something of an innovation. Today, a powerful mobile device has pushed into the background well-known analogues like a hand hacksaw.

Manufacturers produce models for right or left hand. Some models are universal, that is, the user independently chooses which side the handle is located on. Circular saws are used in many areas - production, construction, as well as domestic needs. Equipment is selected according to a number of criteria for specific purposes.

What other circular saws are worth paying attention to?

DeWALT DWE560 (from 8400 rubles)

DeWALT DWE560.
Photo: yandex.market.ru If you don’t mind the money, then take a closer look at this “American”. True, it was still assembled in China. The company makes a professional instrument, but this one is primarily for use by amateurs. But the engine is quite powerful. There are two handles to comfortably hold the saw with both hands. Suitable for straight and oblique cuts. The maximum degree of inclination is 48. The angle is adjusted with special clamps on a scale with degrees. No additional tools are needed.

It has its own blowing system to remove debris. The circular saw already has a ruler with a stop so that the blade goes in a straight line. Some kits include a woodworking disc with nails. This is convenient if, for example, you are planning to cut old parquet. There are also variations with a case, but they are more expensive. The only thing is that this instrument has non-standard discs - not 19 centimeters, but 184 millimeters. But frankly speaking, if you take it with a 16 mm hole, then everything will fit.

Characteristics:

Advantages and disadvantages

Lightweight and reliable

In some copies there are complaints about the quality of the sole

show more

BISON ZPD-1600 (from 3800 rubles)

BISON ZPD-1600.
Photo: yandex.market.ru Russian manufacturer, but the tool is made in China. For such power, a very reasonable price. Takes wood 6.5 centimeters thick. The gearbox is enclosed in a steel casing for protection and good cooling. There is a nozzle for the vacuum cleaner, but the standard fan is in place. The body has a large, comfortable handle. There is a lamb, by installing it in the desired position, which adjusts the angle of the cut. Conveniently, it is not divided into any sections, so you are free to choose the angle within a limited radius.

The design has a metal casing that is placed on the disk to protect the operator. Like all the best circular saws, the base is made of steel. The shaft is fixed and you can change the disc yourself. But why, if everything is so great, did we not place this model somewhere higher in the ranking of the best? The fact is that this is still an amateur instrument with all the attendant disadvantages. The saw is pulled slightly to the side during the process and the cut is beveled. Not critical - up to one millimeter. Plus, the security system is not very well thought out in the sense that it sometimes interferes with the operator.

Characteristics:

Advantages and disadvantages

Power

Lubricates the cleanliness of the cut

show more

Bort BHK-185U (from 3.2 thousand rubles)

Bort BHK-185U.
Photo: yandex.market.ru Another state employee from China, although nominally the company is German. The disc of this model works well on wood and plastic. Cutting depth up to 64 millimeters at right angles. If you reduce the radius by half, it drops to 40 millimeters, which is also sufficient for domestic needs. The manufacturer gives a good five-year warranty on the tool, which means you don’t have to worry that it’s some kind of consumer goods. The kit includes spare carbon brushes and a simple parallel guide.

When purchasing, it is worth considering that it generates a lot of dust, and there is no nozzle for a vacuum cleaner. Therefore, be sure to wear glasses, a mask, and it is better to work outdoors. The handles are rubberized, the ergonomics are good: all the buttons are in their place. But, as always, there are pitfalls in inexpensive equipment: during operation, the cutting angle shifts a couple of degrees, and vibrations on the body cause the screws to unscrew every now and then. If you plan to take it somewhere to a workshop where they will tirelessly saw with the tool for several months in a row, then there is a high probability that the body will crack under the load.

Characteristics:

Advantages and disadvantages

Excellent blade sharpening

Strong vibration

show more

The best drills

On the farm, a drill is an almost irreplaceable thing.

BLACK+DECKER CS1004 (from 4000 rubles)

BLACK+DECKER CS1004.
Photo: yandex.market.ru This is the most affordable circular saw from this company. Powerful and lightweight. There is quick access for replacing the disc and graphite brushes yourself. The tool has two protective covers. The cutting angle is adjustable from 0 to 45 degrees - standard in 2022. One of the main features is double insulation on the body, which makes it possible to use it with sockets without grounding.

For rough work on metal and wood, the original disc is suitable. But if you need perfect accuracy and evenness of the cut, then buy some more expensive analogue. This is the tendency that complete wheels are modern circular ones that are not of the first grade. Buyers note the quality of the design: nothing is loose, you can work with one hand, the sole is perfectly straight. Just keep in mind that the depth here is adjusted in inches. There is little vibration during operation, but the start is harsh.

Characteristics:

Advantages and disadvantages

Price quality

A sharp start

show more

Hitachi C6SS (from 6200 rubles)

Hitachi C6SS.
Photo: yandex.market.ru And again this is the case when you pay for a reliable brand. This model is inferior in characteristics to the others - power, small disk diameter. But she is ready to work on every watt and every millimeter of her knives. The high-quality assembly is immediately noticeable: the tool looks solid, without small parts that could fall off or break. Includes parallel guide for guidance. Its quality is just inferior to the entire unit.

It goes through boards up to five centimeters thick like clockwork. Three standard sheets of plywood assembled together are also not afraid. The handle is ordinary, plastic. Unfortunately, the manufacturer did not make any inserts for convenience. But if you work with gloves, as required by safety regulations, then everything is fine. The circular saw does not produce serious vibrations. There is a hard lever to fix the depth. Connecting a vacuum cleaner is not provided, but if you believe the reviews, this circular saw does not suffer from the accumulation of sawdust dunes - the shavings themselves fly off quite well.

Characteristics:

Advantages and disadvantages

Japanese quality

No connection to vacuum cleaner

show more

Status CP90U (from 6200 rubles)

Status CP90U.
Photo: yandex.market.ru Lightweight and powerful mini-saw. Supplied in a neat case. The circular is very light and can be held with one hand. The second one can hold the workpiece. The kit includes a nozzle for the vacuum cleaner and spare discs. The tool can be called multifunctional. This is also a sawing machine, and with the additional platform it turns into a miter saw. But it needs to be purchased.

The angle is static - 90 degrees. Will take wood up to 28 millimeters thick. Take a thin sheet of aluminum. And if you change the disk, it will work on stone and tiles up to 8 millimeters. There is a length adjustment scale, with a ruler and a reliable lock. There is a laser marker - a convenient thing. The operation key is located exactly under the lower fingers. It is closed by a locking tab. Overall, this is an excellent tool for garden work or private orders.

Characteristics:

Advantages and disadvantages

Cut cleanliness and laser

During operation, the casing hides the cutting point

show more

DIOLD DP-0.55 MF (from 4600 rubles)

DIOLD DP-0.55 MF.
Photo: yandex.market.ru A modest instrument from Smolensk. Focused not only on cutting wood, soft metals, ceramics, stone, cement-bonded particle boards and gas-filled concrete. When working with the latter, please note that there is no dust protection here, so if the motor suddenly stops, this will be considered a non-warranty case. It is also worth purchasing a special disk. According to the instructions, it can work continuously for up to 30 minutes.

The device is compact and fits into the included case. It already contains three disks. The cutting width can be measured using a side stop. Adjustable depth and saw line markings are available. In general, this tool is suitable if you need mobility in your work: there are places where it is not possible to install a standard tool. For example, it would be suitable for a team doing renovations in apartments. Or those who like to make things with their own hands, but who do not need the tool regularly.

Characteristics:

Advantages and disadvantages

Mobility

Due to the nature of the protection, it is difficult to control accuracy

show more

How to choose a circular saw

We talked about the best models of circular saws that are on the market in 2022. We wish you successful shopping, and our expert construction worker Matvey Naginsky will tell you how to choose a circular saw.

Power

Household tools have a range from 400 to 1000 watts. These can be taken for personal use. Suitable for repair teams. The middle class ends around 1500-1600 W. These can be taken to workshops that have a small amount of work. Models up to 2000 W are already for the pros. They are heavy and expensive. Their cutting depth is maximum.

Nuances for comfortable work

Riving knife. It is placed behind the disk. Its function is to relieve the load from the circular saw when ripping. It’s great if there is a pipe for installing a vacuum cleaner - it will come in handy when working on a large front. Another useful feature is soft start. Without it, the powerful instrument vibrates unpleasantly. For precision cutting you need a guide. Often they come included, but sometimes you can buy them separately. Cool accessory laser tag. Unfortunately, not all models are equipped with this. Although this helps a lot in my work.

The best axes

Indispensable helpers at your dacha or on a hike

About disks

If you bought a new circular saw but it seems like it's not working well, try replacing the blade. Don't be afraid to buy products from other brands. The part is not that expensive, and productivity can increase significantly. Disks are also divided according to purpose. But, say, a blade for metal will also take wood and this will not affect its performance and sharpness in any way. But in no case do wood discs need to work on concrete and metal. The tool will fail. It is better to take carbide wheels - they are more durable.