An induction cooker is capable of heating metal cookware through induced eddy currents from a high-frequency magnetic field.
The standard circuit of an induction cooker is usually represented by an induction coil and a frequency converter, as well as an electronic control unit equipped with temperature sensors.
How to make an induction heater with your own hands?
Induction heaters work on the principle of “derived current from magnetism”. A high-power alternating magnetic field is generated in a special coil, which generates eddy electric currents in a closed conductor.
The closed conductor in induction cookers is a metal cookware, which is heated by eddy electric currents. In general, the operating principle of such devices is not complicated, and if you have a little knowledge of physics and electrical engineering, assembling an induction heater with your own hands will not be difficult.
The following devices can be made independently:
- Devices for heating the coolant in a heating boiler.
- Mini furnaces for melting metals.
- Cooking plates
In addition, the great difficulty in designing a stove lies in the selection of material for the base of the hob, which must meet the following requirements:
- Ideally conduct electromagnetic radiation.
- Not a conductive material.
- Withstand high temperature load.
Household induction cooking surfaces use expensive ceramics; when making an induction cooker at home, it is quite difficult to find a worthy alternative to such material. Therefore, first you should design something simpler, for example, an induction furnace for hardening metals.
Report a typo
I've heard about such things, but I've never personally used them. This completes the renovation.
Disadvantages include the fact that users need to use certain cookware that is made from ferromagnetic materials. The body is made in black.
A heat gun is good because it quickly distributes heat. If there is grease on the surface, the system may simply not recognize human touch.
It has four burners and touch controls. It is important to remember that induction cookers are capable of creating fairly high electromagnetic radiation and can have a negative effect on household appliances installed at a short distance.
Using a multimeter you need to check the fuse box, cable and the contacts themselves.
What is the outcome of the study?
Getting it is not a problem, but where can I get the firmware? What's inside
