Drilling machines for the home workshop

A drilling machine is a device that will help you drill a hole of the required parameters when a conventional drill is not able to cope with the task. Used for making through and blind holes, reaming and countersinking, as well as threading. The shape of the equipment allows the material to be removed quite effectively. Vertical drilling machines are very popular both in private workshops and in large factories. The workpiece is secured on the lifting table with a vice or clamps, and cutting fluid is supplied to the processing site from a special nozzle. Each drilling machine has a handle that regulates the spindle stroke. Working equipment - drills, countersinks, thread-cutting chucks, etc.

Criterias of choice

How to choose the right drilling machine if you decide to make a mini-workshop in your garage or plan to carry out a number of works in the country or at home? To choose the optimal model, you will have to take into account a number of factors:

The first step is to take into account the size of the room intended for the workshop, as well as the expected operating mode. As a rule, in domestic conditions such a machine is not used constantly, but periodically. But sometimes prolonged operation of the device is required. In general, in these cases, a household or semi-professional option, which does not have great productivity, is sufficient. You should only think about a professional machine if the machine will be used actively every day. This device is more expensive, but it has high performance. And it usually allows you to create holes that are quite large in diameter. The holes after the drilling machine are accurate and neat
How often will the machine be used : more than 2 hours a day (long-term frequency) or less (repeatedly short-term, usually in this case the device is used for only a few minutes). Remember that household appliances should “rest” for 5 minutes every 20 minutes.
The next important criterion is power . If the machine will be used constantly, then its power should be more than 600 W, or better yet, at least 1000 W. For domestic purposes, a unit with a power of up to 600 W is sufficient. Machines designed to be powered from a 220 V network are somewhat weaker than those designed for other indicators.
Drill bits for a drilling machine. Next, consider what size holes you will create. Household options are unlikely to allow you to use a drill with a diameter of more than 16 mm (in rare cases there are exceptions). But for professional ones you can use 60 mm. For small holes, you need to buy a modest-sized machine for drills up to 6 mm - it will be more accurate.
It is also important to consider what material you plan to work with. So, on machines you can create holes in metal, wood or plastic. But remember that to work with wood or iron sheet you need a machine with a power of at least 600 W, but in order to make holes in thick, durable metal you need a device with a power of at least 1000 W.
The depth of the holes also matters. It depends on the spindle stroke. This indicator is important if you have to work with thick workpieces. And, accordingly, the thicker they are, the more powerful the device should be and the greater the spindle stroke should be.
Think about the size of the machine . So, if you have to work in a modest-sized room (like a garage), then choose a small, compact unit. It is also desirable that it does not make much noise during use. The smallest machines are tabletop. But they usually do not allow the use of drills larger than 16 mm in diameter and are not very powerful. But they are lightweight and operate relatively quietly. The best option is a vertical type of machine. It can be installed on almost any workbench and securely fastened to it using a special footrest.

Equipment for the machine

In order for the machine to be as useful as possible, it is important not only to choose the unit itself, but also to purchase suitable equipment for it. For example, the same vice, if it is not included in the kit. It is best to take the screw version, which allows you to achieve maximum fixation and high accuracy. Such vices usually do not play. You can attach them to the machine desktop. By the way, a vice can also have a number of functions - for example, the ability to rotate and fix in almost any position.

There are universal vices. They are more expensive than screw ones, but unlike the latter they can be installed both vertically and horizontally.

Vise for drilling machine

Important! The vice is not designed to hold workpieces larger than 10 cm in width or length.

To fix large elements, so-called clamps are used. And in order to secure a pipe or spherical part, you will need a prism. If you need to drill parts without markings, you should use jigs that guide the drill and prevent it from going to the side. They allow you to obtain highly accurate holes - even more accurately than when drilling by marking.

Taps for drilling machine

What else could you need? These can be taps, countersinks, reamers and other elements. Each of them is used for a different type of work: for example, taps are used for cutting internal threads. You need to buy them if you plan to perform the relevant work.

Types of drilling machines

All drilling machines are divided into several types:

Vertical drilling . The group has a spindle; it is located vertically in the structure. Designed for single and small-scale production.
Radial drilling . The spindle moves relative to the device, and the product itself moves along the spindle. Handling heavy products and their fixation is simplified many times over.
Filler and drilling . It works at high speed and is mainly intended for wooden products (for example, furniture processing).
Milling and turning . It is multifunctional and combines several quite useful properties and characteristics. The milling and turning machine copes well with cast iron and steel parts, aluminum and brass alloys. In general, it is used to process fairly strong and serious alloys and metals that other types of drilling machines cannot handle.

User voting

Which drilling machine would you choose or recommend?

Encore Corvette-48

9.21 % ( 7 )

Optimum D3009181 OPTIdrill RB8S

17.11 % ( 13 )

JET JDR-34

3.95 % ( 3 )

Belmash RDP430-16F

19.74 % ( 15 )

Bosch PBD 40

21.05 % ( 16 )

Encore Corvette-45

7.89 % ( 6 )

Bison ZSS-350

3.95 % ( 3 )

RedVerg RD-4113

9.21 % ( 7 )

The best vertical drilling machines for home

Bosch PBD 40

German engineers have developed a desktop home drilling machine that is distinguished by high precision operations. The keyless chuck has a locking ring, which increases the reliability of drill fixation. The clamping strength is not inferior to a vice. Two rotation speeds allow you to choose the optimal mode for working with metal and wood. The range at the first speed is from 200 to 850 rpm, at the second – from 600 to 2500 rpm. The data is displayed on a conveniently located display, which helps to control the main operating parameter. For work, you can use drills with a diameter from 1.5 to 13 mm. The recommended thickness of processed parts made of wood is up to 13 mm, of steel up to 4 cm. A digital indicator reads the drilling depth, which allows you to produce parts with high precision in large-scale production. To fix the workpiece, a quick-release clamp is used, which securely holds round-shaped parts.

Advantages

Rip fence
Large desktop
Swivel wheel with soft, non-slip material
Smooth speed measurement
Compact dimensions

Flaws

No reverse

Bison ZSS-550

The metal drilling machine attracts with its versatility: a movable work table and the ability to move the head horizontally allows you to process large-sized parts. This is also facilitated by the large distance between the spindle and the table – 470 mm. The asynchronous motor develops power up to 550 W, the drill can easily handle thick steel workpieces. To select the optimal mode, there are 5 speeds ranging from 470 to 3030 rpm. The B16 chuck securely fixes the cutting tool. The developers took care of safety: the belt drive is covered with a metal casing, and the work table is covered with a transparent screen. The protective cover has a hinged joint, providing easy access to the mechanisms during routine maintenance.

Advantages

Massive stable base
Large ergonomic lever
Vise included
Quill stroke 100 mm

Flaws

No reverse or desktop backlight

Elitech STS 6030VPL

The machine from Elitech is equipped with an asynchronous motor with a power of 600 W and spins the chuck up to 2580 rpm. A variator operates here, just like in a car. The stroke of the working part, controlled by the drive, is 8 cm. The rest is adjusted by changing the height of the stand. In addition to moving up and down, it can tilt 45º to the left or right. The key chuck allows you to clamp shanks with a diameter of up to 16 mm. The backlight makes it easier to use in dark places and improves productivity. In the reviews, owners are satisfied with the rigidity of the drilling machine design and the evenness of the platform. Equipment of this machine: there is a laser sight and digital display of parameters. But thanks to the classic movable table with a vice, this drilling station can clamp both small 1x1 cm parts and large 7x7 cm parts with raised protrusions, where you need to make a hole in hard-to-reach niches.

Advantages

asynchronous motor
work area lighting
electromagnetic switch
laser drill point indicator

Flaws

no reverse
flimsy cartridge curtain
For some, the laser pointer breaks down after a couple of months

BISON ZSS-450

A good machine from a Russian brand, but with a Chinese assembly. The model is inexpensive, so there are nuances here and it is best suited for people with experience. To change the speed, you need to reinstall the belt; a total of 12 adjustments are available (maximum 2450 rpm), the cartridge is clamped with a key. The working area is adjustable in height and tilt, for convenience there is a vice, an emergency shutdown button and a protective screen. Maximum depth – 50 mm, power – 450 W, easily drills wood, plastic and metal.

Advantages

Drills into soft and hard materials
Easy maintenance
The engine is designed for continuous operation

Flaws

Inconvenient speed switching

Einhell BT-BD 501

A household drilling machine that attracts with its German quality and Chinese price.
That's right, it's co-manufactured and it gives the operator a wonderful combination of durability and affordability, efficiency and smooth, quiet operation. Specifications:

engine power – 500 W;

rotation speed – 280-2500 rpm;

number of speeds – 9;

weight – 22 kg;

dimensions – 536x396x248 mm.

Advantages

Compatible with drills up to 16mm diameter
there is a screen that protects from chips
the bed is rigid and this ensures stability
the desktop can be easily fixed at different angles

Flaws

the base is too thin and may sag under load

How to choose a drilling machine for your home workshop and garage

To choose a machine for home use or a garage workshop, you need to carefully study the models you like to see if they meet the basic criteria.

Supply voltage

If we consider machines in terms of power, then models powered by 380 V are more powerful than those running on 220 V. However, if you do not have the possibility of a three-phase connection, then a machine with 380 V will not suit you; it is better to opt for a model that works from a regular household outlet.

Rotation speed and adjustment method

The rotation speed of the drill chuck varies between 200-2800 rpm. This parameter directly affects productivity, but its effectiveness depends on matching the power of the machine, otherwise the equipment will slip very often. The rotation speed can be adjusted in two ways: stepwise, by rearranging the belts on the pulleys and by smoothly turning a special switch on the body. The second option is more convenient for the user, especially with little experience working on similar machines.

Power

The high power of the device ensures long-term continuous operation, which affects productivity. The power rating also indicates whether the machine can handle hard materials without the tool getting stuck.

If the machine is needed to work with plastic and wood, then its power should be 350-450 W. For steel or aluminum, choose a 500-600 W machine (if the workpiece thickness is from 2-5 mm). Thicker workpieces will require higher power - from 700 to 900 W. For professional work and processing of hard materials, it is preferable to buy machines with a power of 1000 to 1600 W.

Maximum diameter and drilling depth

Household machines can create holes with a diameter of 13-16 mm; for industrial machines this figure can reach 40-50 mm. This indicator must be taken into account if you are drilling materials for large bolts. You also need to look at the depth of the holes, it varies between 20-50 mm.

IMPORTANT! If your work involves thick materials with a cross-section of up to 5 cm, then you should buy the appropriate machines.

Chuck type

Drilling machines are equipped with three types of chucks:

Key. Using a special key, the toothed ring is rotated to more securely fix the drill. It takes more time, but the equipment is held more securely, so this method is used very often.
Klinova. The shank in this case has the shape of a cone and is mounted in a chuck with the same inlet hole. The advantage is that drills can be changed very simply by knocking out a wedge through the groove. The drill is held securely, but such a chuck is installed exclusively on large drilling machines.
Quick-clamping. The cartridge is fixed without the use of special tools. However, this does not affect the security of the shank, which makes machines with a keyless chuck most suitable for light tasks.

Working stroke

By working stroke we mean the stroke of the quill. The product remains motionless, only the chuck with the fixed drill is lowered. The quill stroke ranges from 5 to 14 cm. The larger this parameter, the easier it is to work with large workpieces and parts without lowering the stand, which increases productivity.

Ergonomics and safety

When purchasing a drilling machine, you should pay attention to how conveniently the power and control buttons are located, whether there are tips on the handles, how the drives for raising the table and increasing the distance between the vices are located.

To ensure the safety of the equipment, the manufacturer must supplement the model with a protective screen for the cartridge and high-quality insulation on the keys. It is also necessary to have an emergency stop button and a magnetic restart interrupter. Such equipment will protect the operator from injuries, and parts from defects and inaccuracies during processing.

Weight and dimensions

If we talk about the size and weight of stationary drilling machines, they are quite significant and indicate the need to immediately select a permanent location in a workshop or workshop. The weight of the model can be in the range of 20-150 kg, and the height of the stand can reach 70-110 cm. This allows you to place tanks, frames and other large-sized structures under the cartridge. Large machines are also suitable for drilling holes on finished products.

Small machines weigh from 12 to 25 kg, which allows you to move them or take them with you on the go. However, it is important to take into account that their height is small, so such models can only be used for working with workpieces, and not with volumetric parts.

Additional features

Additional functions can greatly facilitate working with the machine:

illumination of the working area, which improves accuracy and allows you to work even in low light conditions;
laser target designator;
a coolant supply system that protects the material from deformation due to heating;
LCD display that allows you to monitor the rotation speed and depth of drill placement;
reverse rotation of the chuck, making it easier to remove the equipment when it gets stuck in the material.

The best radial drilling machines for home

Belmash RDP430-16F

This model is suitable for boring and countersinking various parts, capable of making both through and blind holes. This option is reliable, but not the most convenient to use. The model is not very convenient to use: the workpiece needs to be fixed on the work table, but you can switch the rotation speed of the drill only by moving the belt (rotation speed varies from 500 to 2500 rpm, 5 speeds in total). The drilling depth can be selected on the handle of the device. The machine can be mounted on a workbench to make it easier and more comfortable to use. A vise is included. Motor type is asynchronous. The weight of the device is 55 kg. The work table measures 30x30 cm. The maximum diameter of the drill that can be used is 50 mm. The main drawback of the model is its low popularity.

Advantages

convenient to use
secure fixation on the workbench
relatively inexpensive
simple controls
allows you to install a large drill

Flaws

inconvenient speed change

Encore Corvette-48

The machine is equipped with an asynchronous electric motor with a power of 550 W; the motor is reliably protected from overloads by a belt drive. The operator can choose one of five speeds ranging from 500 to 2450 rpm, which allows processing wood, plastic, and metal. The spindle can be tilted to the right and left, and the horizontal stroke is 320 mm. The B16 chuck securely fixes the cutting tool; the diameter of the drill can be varied from 3 to 16 mm. Engineers paid special attention to safety. The protective screen prevents chips from getting into your eyes, and the magnetic starter prevents spontaneous starting. When opening the top casing for scheduled maintenance, the limit switch de-energizes the electric motor. The spindle lowering handles are made with plastic tips, which improves ergonomics and increases accuracy.

Advantages

Rotate the desktop at a specified angle
Vise included
Mechanism for drilling blind holes to a given depth
Good stability
Low noise level

Flaws

Insufficient engine cooling

The best floor drilling machines for price and quality

Electrical device SS-16/550

Electrical device СС-16/550
Quite a popular model of a floor-mounted drilling machine with a power of 550 W with an increased size of the work table and protective glass, ensuring the safety of the operator during all manipulations. Makes holes with a diameter of up to 16 mm and a depth of up to 30.5 cm, the rotation speed of the drill is adjustable and can reach the usual 2560 revolutions per minute. The distance between the spindle and the working area can be 33 cm. There is an emergency stop button for the engine, and air cooling of the moving elements inside the case is installed to protect the device from overheating during a long start-up.

Characteristics:

The type of machine is for floor placement.
Power, W - 550.
Power type - 220 V.
RPM - 2650.
Number of speeds - 9.
Maximum drill diameter, mm - 16.
Features of the model: protective glass.
Weight, kg - 20.

Pros:
light weight;
Conveniently adjust the distance from the spindle to the work table;
the working area is large;
good drilling depth.

Minuses:
no vice;
The table cannot be tilted.

CORMAK Z7016 Vario

CORMAK Z7016 Vario
A decent version of a drilling machine for floor placement, it is small in size, so it is suitable even for small workshops. The power of the electric motor is 700 W, the drill rotates at a speed of up to 2400 revolutions per minute. The hole diameter is 16 mm, the drill can go to a depth of up to 9 centimeters. The desktop has dimensions of 24 by 24 centimeters and can be adjusted in tilt, which is very convenient in work. For safety, the manufacturer took care of protective glass.

Characteristics:

The type of machine is for floor placement.
Power, W - 700.
Power type - 230 V.
RPM - 2400.
Number of speeds - 5.
Maximum drill diameter, mm - 16.
Features of the model: table tilt adjustment, protective glass.

Pros:
high-quality assembly;
no strong heating during prolonged startup;
durable table does not bend under load;
optimal power indicators.

There are no cons.

Encore Corvette 244

Anchor Corvette 244
For regular use and large-scale production where significant productivity is required, it is worth taking a closer look at this floor-mounted vertical drilling machine. Quite massive, weighing up to 140 kg, with a reliable 1500 W electric motor. There are 12 operating speeds, it is possible to install a drill with a diameter of up to 16 mm. To fix the workpiece, the manufacturer has equipped the model with a reliable vice, and the large work table can be tilted at the desired angle, which simplifies the work process and makes it more accurate.

Characteristics:

A type of machine is a vertical drilling machine.
Power, W - 1500.
Power type - 220 V.
RPM - 2700.
Number of speeds - 12.
Maximum drill diameter, mm - 16.
Features of the model are a vice and table tilt adjustment.
Weight, kg - 140.

Pros:
reliable engine and good power performance;
there is an emergency shutdown button;
high-quality drill fixation;
precise drill placement and 12 operating speeds.

Minuses:
heavy.

The best drilling and milling machines for home

Euroboor ECO 100/4 D

Despite its compact, portable design, this drilling machine is capable of carrying out serious and labor-intensive tasks at a professional level for complex tasks on-site. The Euroboor ECO 100/4 D is suitable like no other. The magnetic base has an attraction force of 3 tons - more than enough to securely fix a machine weighing 28 kg. The device is capable of working with both twist drills (up to 32 mm) and annular cutters with a maximum allowable diameter of 100 mm. A Morse taper No. 3 spindle, a good power reserve (1.9 kW) and a reliable gearbox ensure high drilling efficiency for any workpiece thickness (up to 10 cm). Electromagnetic mounting allows you to install the machine directly at the work site on an oversized workpiece, which significantly expands the scope of its application. In addition, with the Euroboor ECO.100/4 D drilling machine you can cut threads and perform countersinking.

Advantages

best machine for drilling large holes
can cut threads and perform countersinking
high drilling efficiency

Flaws

a bit expensive

Metal Master MF-20

A rigid design with a movable milling head that can rotate around a vertical axis allows you to solve complex problems. Processing mutually perpendicular surfaces increases the pace of work. A 550 W electric motor spins the spindle at a speed of 2200 rpm. Six speeds, which are switched using the rearrangement of the V-belt, allow you to process any material. To select the optimal mode, you can use the speed table. Ergonomic handles are equipped with small pitch dials and a clearly visible scale. The micrometric feed mechanism is located on the milling head for comfortable work. The operator can select the spindle rotation direction by switching the lever on the control panel. The vertical feed lever is equipped with a handle for quickly lowering the quill.

Advantages

T-slots for mounting clamping equipment
Fixing the desktop with locking handles
Molded base design
The engine is designed for intensive work
Drill depth stop

Flaws

Overcharge

Zitrek DP-90

Next in our TOP is the inexpensive Zitrek DP-90 drilling machine, which will be an excellent purchase for your home or garage.

The compact dimensions of the machine allow it to be installed on a table. And thanks to the 550 W motor, it does an excellent job of drilling holes in hard polymer materials and wood, as well as in various metal workpieces.

The machine has 9 speeds and is capable of performing from 500 to 2620 revolutions per minute. And its chuck allows processing with drills with a diameter of up to 16 mm.

Among the design features of the machine, it is worth noting the possibility of raising, lowering and tilting the work table, which allows you to adjust the workpiece to the spindle depending on its dimensions. In addition, there are grooves in the base of the machine with which you can attach a vice to it in order to process larger workpieces.

The machine chuck is covered with a transparent screen, which prevents chips from flying out during operation. It is also worth noting that the Zitrek DP-90 has an emergency shutdown button that will quickly stop the spindle from rotating.

Owners speak generally positively about the operation of this machine. noting excellent value for money. So, if you are looking for an inexpensive drilling machine, then you should pay attention to this model.

Power: 550 W.
9 operating speeds.
Drill D: 1.5 - 16 mm.
Speed: 500 – 2620 rpm.
Spindle stroke: 50 mm.
Table height adjustment.
Tilt angle adjustment.
Emergency stop.
Dimensions: 400 x 490 x 260 mm.
Weight: 18.5 kg.

The best magnetic drilling machines for home

MESSER MDM-32

Powerful, delivering coolant, installed anywhere, easy to learn and operate, this unit from South Korea has become an example of modern productivity.
Specifications:

engine power – 1550 W;

rotation speed – 100-830 rpm;

weight – 15 kg;

dimensions – 300x280x480 mm.

Advantages

buttons and handles in the operator's free access area
relatively deep penetration of the tool - up to 55 mm
there is a reservoir with coolant

Flaws

only 1 speed

Lenz Steyr-35

Austrian engineers proposed an original solution: an inclined body, which ensured maximum structural rigidity. The 1100 W electric drive is adapted to intense, continuous loads. Lubricating fluid is used for cooling; the gearbox is reliably protected from its penetration by a spindle seal made of elastic copolymer. Light and durable alloys were used in production, which allowed the weight to be reduced to 10 kg, which simplifies use on construction sites. An ergonomic handle is provided to control the movement of the drive. The power reserve is 21 cm, which distinguishes the model from competitors in its class. The electronics are reliably protected from overloads and voltage surges. The guides are dovetail shaped, which increases their service life.

Advantages

High wear resistance of guides
Drilling accuracy up to 10th grade
The ventilation system is protected from chips
Seals are resistant to low and high temperatures
Ergonomic carrying handle
Plastic case

Flaws

Not detected

What to consider when choosing?

We have described more than one really good drill for the home; the rating of the best models for a workshop or enterprise also includes quite a few options. So which one will be the best choice? You should purchase a model that meets the following parameters:

Power – if you plan to use the equipment frequently and get high performance from it, the power should be at least 600 W.
Hole diameter - at home you hardly need to make it larger than 16 mm, but in factories and factories you often have to make sections of 50-60 mm.
Ease of use - the more compact and lighter the machine, the more speeds it supports, the more ergonomic it is, the more convenient it is to use, but also the easier it is to troubleshoot.
Security – make sure the option you like has a transparent screen and cannot be turned on by itself.

We hope you can now make your decision easily. And if you have any questions, contact us: we will tell you which domestic drill is better, Optima, ZUBR or DILD, which are the best American, German, Chinese models and give them to you at a competitive price.

The best household drilling machines for the home

Ryobi RDP102L

The machine is perfect for work in the garage or home workshop. It copes with large volumes of work, so there is also a place for it in a small repair company. Processing of wood and metal, plastic and other composite materials is carried out in a matter of minutes. The engine may not be the most powerful - 390 W, but the rotation of the cartridge varies from 510 to 2430 rpm. Accordingly, the operator independently regulates the types of work and copes with them in a short period of time. Drill immersion limiters, laser markings, a lock - all these elements are already included in the design and greatly simplify the work.

Advantages

speed adjustment
drill immersion control
long warranty period
presence of laser markings
latches built into the structure
preferential service for 3 years

Flaws

not found

Encore Corvette-45

It’s not worth buying it for production, since the motor gets hot under prolonged loads, but it’s an excellent option for the home. It has 12 speeds, a power of 550 W, which is enough for any materials, and quiet operation so as not to disturb the neighbor. The machine is not magnetic, so it vibrates quite a lot, but it can be mounted on a table, which completely compensates for this.

Advantages

Minimum chuck runout
Quiet operation
Handles hard and soft materials

Flaws

Strong vibration
Heats up quickly

Caliber SS-13/400A

The device is inexpensive, the domestic manufacturer guarantees highly accurate and accurate drilling of different types of surfaces and materials. The sharpened drill bit is sold as a set. The machine is popular in domestic conditions and will be an excellent assistant in large industries. The device copes with materials such as wood and metal, plastic products. The operator is protected from chips - a special transparent shield is built in. Through it you can easily monitor the progress of work and adjust it if necessary. The vice holds the workpiece; its ergonomic shape and handle allow you to perform work for a long time without experiencing physical discomfort.

Advantages

high drilling precision
accuracy of processing
working with different types of materials
presence of a transparent protective shield
high quality and durable vice

Flaws

sometimes the vice jams

RedVerg RD-4113

The Chinese manufacturer offers the machine at a very reasonable price. A budget option does not mean low quality. The machine is universal, it drills, countersinks and reams holes. Suitable for use on various materials. Suitable for more experienced users, but the kit includes detailed instructions, so even without experience you will understand the operating principle of the design perfectly. It is used in domestic and garage conditions, copes with large volumes of work, and has overheating protection. The weight of the structure is 19 kg, the drill can be moved from place to place without difficulty, and is also easy to transport.

Advantages

light weight 19 kg
versatility
working with different types of materials
Suitable for workers with no experience
Detailed instructions for use included
reliable drilling

Flaws

weak electric motor
table with thin walls

KRATON DM-13/350

Drilling machine for working with wood. Its power is 350 W, which is enough to make holes with a diameter of up to 13 mm. Using a belt system, the operator can set speeds to 620, 890, 1240, 1750 or 2620 rpm. Small dimensions of 37x19x58 cm simplify placement of the drilling rig in the garage and transportation. A plastic curtain with a screw lock protects the operator's eyes from chips. The included vice ensures reliable holding of workpieces. The machine is notable for its low price. Despite the cheapness, it has a brushless motor, high-quality anti-corrosion coating and a stable base. If you periodically craft wood, then this drilling machine will greatly facilitate your work.

Advantages

low electricity consumption
light weight 19 kg
5 speeds
brushless motor

Flaws

Suitable only for wood

How to buy a good mid-class drilling machine: ranking of the best ones

These are models that can already be used at service stations, and at repair bases of small-scale companies, and in the workshops of enterprises that produce their products in small volumes.

Ryobi RDP102L

This universal Japanese machine, with a 2-year warranty, can even handle complex plastic, wood, metal and composite parts.
With standard 5 speeds, it stands out for the accuracy of its results. Options:

engine power – 390 W;
rotation speed – 510-2430 rpm;
spindle quill stroke – 50 mm;
weight – 21.2 kg;
dimensions – 610x390x305 mm.

Pros:

equipped with a tool immersion depth limiter;
there is laser marking that facilitates precision processing;
The manufacturer provides a loyalty program with preferential service.

Minuses:

relatively weak motor.

Einhell BT-BD-701

Of course, we have a subjective rating of drilling machines for the garage, and it’s up to you to decide which one is better to take for tasks at a higher level, but this model will definitely cope with work of average complexity.
It has a Chinese price, German build quality and no longer has the play inherent in its “younger brother” - this manufacturer is quickly correcting its mistakes. Characteristics:

engine power – 630 W;
rotation speed – 220-2450 rpm;
maximum drill diameter – 16 mm;
spindle stroke with chuck – 60 mm;
weight – 35 kg;
dimensions – 850x633x193 mm.

Advantages:

12 speeds at once;
stable base 350x230 mm;
measuring scale printed on the front panel;
motor overload protection ensures continuous operation;
The cutting depth is adjustable.

Flaws:

comparatively bulky and heavy.

BISON ZSS-550

This Russian-Chinese monster is definitely one of the top 10 drilling machines for the garage, because it does an excellent job of processing large parts.
The speed changes stepwise and smoothly, the operator is completely safe, he can set the table position to almost anything, easily achieving high accuracy of countersinking or boring. Options:

engine power – 550 W;
rotation speed – 470-3030 rpm;
spindle quill stroke – 100 mm;
weight – 48 kg;
dimensions – 320x925x410 mm.

Pros:

precision result;
the ability to adjust the angle of inclination, and not just the height;
there is an emergency (instant) shutdown button;
The transparent shield provides protection from chips.

Minuses:

quite heavy, and the walls of the racks are thin;
The vice is sometimes too weak for large workpieces.

Elitech CTC 5525VPL

If we choose a top-end drilling machine for a home workshop based on ratings and reviews, we will see that many people recommend this particular Chinese model.
Why? Because it is very modern and convenient: you can adjust the speed, surface inclination and even spindle play. And see all the settings on the electronic display. In terms of its functionality, this is practically professional equipment, which is why it is used in maintenance centers. Characteristics:

engine power – 550 W;
rotation speed – 440-2580 rpm;
maximum drill diameter – 13 mm;
spindle quill stroke – 50 mm;
weight – 24 kg;
dimensions – 720x460x300 mm.

Advantages:

all entered information is displayed on the screen;
equipped with an immersion depth limiter;
there is an LED backlight and a laser sight;
the rotation of the working surface can be set up to 45 0 to the right and left;
there is an elevator rail.

Flaws:

Sometimes there is a beating in the cartridge.

Bosch PBD 40

This is, perhaps, the best drilling machine for a garage or service station with small amounts of work.
Again we see German quality with Chinese availability, but now complemented by stabilization, support for cutters with a diameter of up to 40 mm, and digital speed control. And this with impressive stability, light weight and responsive handling that helps ensure maximum control of your workflow. Options:

engine power – 710 W;
rotation speed – 200-2500 rpm;
weight – 11.2-13.7 kg;
dimensions – 750x378x273 mm.

Pros:

there is a high-precision cartridge with a locking ring;
the handle of the built-in wheel has a soft pad;
equipped with a digital display with electronic indication;
a wide table and parallel stop are the key to precise positioning of the workpiece;
There is a laser and LED backlight.

Minuses:

only 2 speeds.

The best professional drilling machines for home

ENCOR Corvette-244

The drilling machine is designed on a platform with a stand and is equipped with a second stand that moves along the teeth. The equipment weighs 140 kg and is mounted on a table or stand. Torque is provided by a brushless motor with a power of 1500 W. The belt drive protects the motor from damage when the equipment jams. It is allowed to install shanks with a diameter from 3 to 16 mm in the key chuck. The working stroke of the quill is 12 cm, but lowering the stand compensates for this and allows large parts (boxes, safes, etc.) to be placed under the drill. According to reviews, customers are satisfied with the power of the machine and the ability to work with crowns and cutters.

Advantages

emergency power off button
asynchronous motor
protection against spontaneous startup after shutdown
there is a limit switch on the casing

Flaws

the spindle cannot move horizontally
O supply system is not provided
weight 140 kg makes transportation difficult

PROMA E-1720FVL/400

Floor-mounted installation equipped with a cone for clamping tools. The desktop rotates 360 degrees and has a tilt angle of 45 degrees. It has a regulator of drilling depth and spindle speed. Has a spindle speed indicator and a light.

Advantages

equipped with Morse taper 3 for tool clamping
ability to drill holes at different angles

Flaws

JET IDP-15BV 230V

The machine with smooth (electronic) rotation speed control copes well with deep drilling in steel and cast iron (up to 20 mm). This performance is provided by a powerful 1.1 kW electric motor, the rotation of which is transmitted through a single-speed belt drive. In this case, the maximum speed is 2000, and if necessary, can be reduced to 450. The massive thick-walled pipe (73 mm) on which the base runs perfectly dampens vibrations, which ensures high drilling accuracy. The desktop surface is adjustable in height and angle, providing a solution to a wide range of tasks. The fact that the equipment operates from a regular power supply (220 V) allows it to be used not only for production purposes, but also in home workshops. The price fully corresponds to the reliability and quality of the drilling machine, which can cope with any intensity of work. In addition, the presence of a factory warranty (2 years from the date of purchase) is a factor that positively influences the choice of potential owners in favor of the JET IDP-15BV.

Advantages

Smooth speed control
Factory warranty
The price corresponds to reliability and quality

Flaws

Zitrek DP-82

The TOP drilling machine Zitrek DP-82 continues.

It has a 400W motor and is used for drilling holes in metal products, hard plastic materials and wood.

The machine is equipped with a spindle with a stroke of 50 mm, into which a chuck with a drill with a diameter of up to 13 mm is inserted. It has 9 operating speeds ranging from 500 to 2620 rpm, which allows you to choose the best option for processing a particular material.

The workpiece table of this machine is adjustable. It can be adjusted in height and angle. And special grooves in the base of the machine allow you to install clamping equipment to process larger workpieces.

For safe operation, the machine chuck is covered with a transparent screen. It protects against chips and work debris without obstructing your view. There is also a belt drive protective cover and an emergency stop button for emergency shutdown of the machine.

Those who have already purchased the Zitrek DP-82 speak generally positively about it, noting its low cost, high drilling accuracy and compact size.

Overall, a great inexpensive option for personal use at home or in the garage.

Power: 400 W.
9 operating speeds.
Drill D: up to 13 mm.
Speed: 500 – 2620 rpm.
Spindle stroke: 50 mm.
Table height adjustment.
Tilt angle adjustment.
Emergency stop.
Dimensions: 400 x 450 x 260 mm.
Weight: 17 kg.

In what mode do you plan to work?

Most often, in a home workshop, only a 220 V connection is available. Accordingly, you need a machine with the same supply voltage. The presence of a 380 V network is a significant advantage. Three-phase motors have no loss of power. Several units can be connected, while in a two-phase network several high-power units cause voltage fluctuations in the network.

So, having answered the questions, you can already imagine your future machine. Whether it will be household or professional, for large or small holes, for wood or metal, large or small workpieces. All that remains is to think about the amenities and check whether it is suitable for your workshop. In the online store “VseInstruments.ru” you can choose equipment for work and hobbies, of any size and with suitable characteristics. You will find all this in our catalog.