Table - calculation of the weight of an aluminum pipe. Dimensions and thicknesses of aluminum pipe. Millimeters.

Non-ferrous metal Rolled aluminum Sheet

Aluminum sheets are produced in accordance with GOST 21631-76 from aluminum and its alloys of grades A0-A7, AD0, AD1, AD, AMg2, AMg3, AMg5, AMg6B, AMts, VD1, D16A, D1, etc. The thickness of aluminum sheet is within 0. 3-10.5mm, aluminum sheet length - 2000-7200mm. The weight of an aluminum sheet is determined according to the tables of GOST 21631-76, which show the theoretical weights of one linear meter of sheet.

Possessing fire-resistant qualities, as well as incomparable resistance to atmospheric and mechanical influences, aluminum sheet is increasingly used by many designers.

Weight of aluminum sheet according to GOST 21631-76

Sheet thickness, mm

Theoretical weight of 1 m of sheet, kg, normal manufacturing accuracy in thickness and increased accuracy in width

How to calculate the weight of an aluminum sheet

You can independently calculate the weight of an aluminum sheet using two methods.

1. Using a table of the theoretical mass of one meter of sheet according to GOST or a reference book.
2. Use the specific gravity of one square meter to calculate.

The first method is more accurate and gives minimal error in the calculation. When compiling GOST tables, the following are taken into account:

• maximum permissible deviation of sheet dimensions;
• weight of one linear meter of standard thickness and width for each grade of rolled aluminum.

To determine the weight of the entire sheet, you need to select from the table the weight of one meter, which corresponds to the thickness and width of the calculated product, and multiply it by the length. In this way, you can calculate the mass of the entire batch by multiplying the result by the number of sheets.

To obtain more accurate data on the weight of an aluminum sheet, the grade of the alloy from which it is made is taken into account. In GOST tables and reference books, each brand has its own conversion factor. The previously obtained sheet weight must be multiplied by the appropriate value.

If there is no coefficient value according to GOST, then the general indicator for other alloys is used equal to 0.95.

To calculate the mass of aluminum sheet by specific gravity, the formula V=L*H*T is used, where L is the length of the sheet, H is its width and T is its thickness. Taking into account the size of the sheet with an area of ​​one square meter, the result is V=1*1*T.

The resulting value is multiplied by the density of the sheet alloy in kg/m3. The density of the alloy (P) can be found in the reference book. The result is the weight of one square meter in kilograms. When multiplying the specific gravity by the length and width, we get the weight of a specific type of product.

You can use average values ​​to calculate weight.

Aluminum sheet is measured in different places for length, width and thickness. The maximum values ​​are added to the minimum values, the sum is divided by two. All other calculations are made using the same formula as for calculating mass by specific gravity.

With all types of sheet weight calculations, there are errors. For large volumes, seemingly minor deviations in the mass of one product can turn into tons. When purchasing sheet aluminum, our company determines the weight of any batch with an accuracy of up to a kilogram. Weighing the metal gives the most correct values.

Source

Classification according to GOST 21631-76

The main document regulating the production of smooth, corrugated and perforated aluminum sheets is GOST 21631-76.

Read also: Motor overload protection

Domestic producers of rolled aluminum meet 80% of the needs of the Russian market, while the production of sheets accounts for about 70% of the total production volume. Imported materials are marked according to ISO 209-1 (international standard) and EN 573 (European standard).

Aluminum sheet weight

For the convenience of preliminary calculations of various designs, we bring to your attention the weight of aluminum sheets per piece and square meter in the table below. These sheets are widely used in industry. The weight of sheets made of other alloys can be calculated using conversion factors. To calculate the weight of AMg2 aluminum sheets, this weight must be multiplied by a factor of 0.992; Amg3 - 0.988; AMg5 - 0.981; AMg6 - 0.977; D16 - 1.03. Please note that the indicated weight of aluminum sheet is approximate and calculated using theoretical formulas. The weight of real sheets can fluctuate both up and down by several percent; this is due to technological variation during production. If the required sheet size is not in the table, you can use our non-ferrous rolled metal weight calculator

How much does a square meter of aluminum sheet weigh?

How much does an aluminum sheet weigh?

At Nevskaya Aluminum Company you can buy aluminum from a warehouse in St. Petersburg or order delivery throughout Russia.

The warehouse of the Nevskaya Aluminum Company is located at 266 Ligovsky Prospect, not far from the Moskovskie Vorota metro station, next to the freight highway - Vitebsky Prospekt, exits to the WHSD and the Ring Road. Loading documents are issued on site.

Source

Aluminum sheet weight

Aluminum sheets are manufactured strictly in accordance with state regulations GOST-21631/2019. Hot rolled sheets are manufactured in accordance with established state standards. According to the customer's requirements, it can be manufactured to individual sizes.

Aluminum products are very actively used by people in almost all areas of industry. In the production of national goods, they are used in the food industry, automotive production, as well as in various other household and economic spheres.

Alloys used in the production of aluminum sheets

For the production of sheets, aluminum grades A0, A5, A6, A7 are used (the chemical composition is regulated by GOST 11069-74), as well as AD, AD0, AD00, AD1 (according to GOST 4784-74). The range also includes products made from heat-strengthened and non-heat-strengthened alloys of the following types:

• high strength;
• weldable, standard strength;
• normal strength (duralumin);
• highly plastic, medium strength (magnalia);
• highly plastic, low strength - with and without alloying.

Tables of weight of aluminum sheets according to various GOSTs and TUs

Dimensions of aluminum sheet according to GOST 21631-76

The dimensions of the sheet depend on the brand of material used and the type of processing:

• The width varies between 600-2000 mm.
• The minimum length is 2000 mm, the maximum is 7000 m.
• Sheet thickness according to GOST 21631-76 - from 0.3 to 10.5 mm.

Rolled aluminum is supplied in sheets of measured, multiple-measured or unmeasured lengths. In the second case, the step is 500 mm.

Maximum deviations in width, in mm:

Maximum deviations along the length, in mm:

On one side of the aluminum sheet, the grade and condition of the material, the presence and type of plating, overall dimensions, batch number and quality control stamp are indicated. The data is applied at a distance of no more than 3 cm from the edge. When the thickness of rolled aluminum is less than 1 mm, marking only the top sheet of the bundle is allowed.

You can also:

Atlant-Metal LLC © 1994–2011 All rights reserved.