How to sharpen electric razor knives at home

An electric razor is the most convenient tool for shaving, since it does not require the use of cosmetics, hygienic procedures, and most importantly, after such shaving there is no irritation, cuts or abrasions on the skin. And if a few years ago the device was a novelty for many men, today every third man has an electric razor in his arsenal of shaving accessories.

Despite the functionality and quality of the device, the electric razor periodically needs sharpening. Otherwise, dull blades will not cut, but rather pull hairs out of the skin, causing severe irritation and ingrown hairs. Therefore, when purchasing such a device, you need to immediately inquire about how to sharpen an electric razor after a while if the blades do not perform their functions well.

Why do you need to sharpen electric razor blades?

The advantages of an electric razor are the circumstances it requires for shaving.
More precisely, it does not require it, since using an electric razor you need to remove excess hair dry without water, foam or other shaving products. The device is compact and mobile, so it can be used anywhere. Ideal would be devices that have a self-cleaning function, but there are still few such models on the sales market. Important! Dull blades do not cut, but pull out stubble hairs, scraping off the top layer of skin.

During operation, it will be necessary to sharpen the blades of an electric razor, and even if we consider models with self-sharpening blades, sooner or later it will be necessary to sharpen them. Some men prefer to simply replace the blades with new components, while others turn to specialists. In fact, many people will be able to sharpen their electric razor blades themselves to restore its functionality.

What to look for when choosing

If you decide to buy an electric razor, pay attention to the following recommendations:

• Buy a razor in specialized stores to avoid buying a counterfeit.
• Inspect the electric razor, its body and blade unit for damage or scratches.
• The razor handle should fit comfortably in your hand and not slip out.
• Having a trimmer will give you the opportunity to trim your beard, temples, mustache and sideburns.

Sharpening and editing

First, let's separate these two concepts. Sharpening is the formation of a cutting edge (CR), and editing is needed to bring this edge to working condition. At high magnification, the cutting edge of a knife sharpened on a large block looks, frankly, unimportant and resembles a rock ridge eaten away by erosion. Editing the paint using a fine abrasive allows you to bring this visual nightmare to a more or less decent state. The knife begins not only to cut, but also to shave (if, of course, you did everything correctly).

What if there is nothing at hand?

Plate.
An ordinary plate. A favorite topic and one of the favorite knife myths is “the steel on the knife must be soft so that it can be sharpened on a bowl.” The Uzbek pchak, which is cited as an example, is in fact far from an ideal knife, both in design and in steel, but in the Soviet Union it was one of the few national knives that could be purchased without fear of criminal prosecution. Ay, hit me on the hands, I'm slipping into extraneous topics again

A ceramic plate is not particularly suitable for sharpening; it is more suitable for straightening, but in fact it is a fine-grained abrasive. Average “kill” “Victorinox”, “Keys”, “Okapi” and so on (that is, knives with a short blade length and relatively soft steel) can be brought to a very decent condition in 15-20 minutes. Be sure to make sure that there are no chips or gouges on the bottom that will damage the metal.

Carefully, without unnecessary pressure (so that the blade does not bend), strictly observing the angle, move the edge along the bottom and after a quarter of an hour enjoy the fruits of your labor. During the process, the plate will have to be turned - the pores in it quickly become clogged with metal particles, so that the cutting edge stops grinding.

Let’s say, you won’t be able to bring a knife with such a tool to the point of “cutting along the hair on the fly,” but you can confidently cut a sheet of paper.

No matter how the gentlemen perfectionists wrinkle their noses (who don’t feed them bread, but let them rape every piece of iron with a full set of Japanese water stones from 300 to 20 thousand grit inclusive), it is precisely this status - “cuts paper” - that allows you to classify your knife as sharp.

Also suitable for straightening a soft, dull blade are the side glass of a car door, an oak or beech board, a leather belt (even without special pastes applied) - and you’ll learn a lot more with experience.

Finally, a few tips for those who want to master manual sharpening. If you use natural or artificial stones (I'm not talking about diamond stones and grinders), remember: NEVER SHARPEN DRY. Be sure to wet the work surface. Sharpening stones can be water or oil, be sure to use these liquids according to the instructions.

Start your training not with the most expensive or dullest knife in the house, but with a cheap and moderately dull one. This will make it easier to see mistakes and achieve the desired result. But if you screw it up, it’s no big deal.

And of course, don't lose patience. Ninety percent of sharpening is your skill and knowledge, and the tool only accounts for the remaining ten percent. Everything will work out for you - and may your knife always be sharp.

About the bars

The oldest and most common way to make a knife sharp is by hand sharpening on abrasive stones. A set of decent whetstones is necessary for any thoughtful knife lover, because it is not only a working tool, but also a reason for pride. For home and family, it is recommended to have two or three bars of different grain sizes, as well as a piece of leather rubbed with GOI paste for removing burrs (more on that another time) and final finishing of the blade. Professional sharpeners, depending on their qualifications, can use up to a dozen natural stones of different characteristics, but the average person has no need for such delights. In everyday life you can easily do without such a set. The cutting edge on the blade can be shaped quite successfully using a flat "velvet" file or a piece of sandpaper glued to a piece of wood. In “street” conditions, I even had to sharpen cheap Chinese knives on a concrete curb block, and edit them on river pellets. 0 But this is completely extreme, and if you decide to master the “correct” manual sharpening, then for starters you can buy an inexpensive combined (double-sided) stone, which are now a dime a dozen in Chinese online stores. Their quality is uneven, but it is quite possible to find very decent samples. I don’t recommend using diamond-coated whetstones - they eat up the blade too much, and there’s a high chance of getting damaged.

Panasonic ES-6003

You can now forget about skin irritation during shaving. The developers of the Panasonic ES6003 took care of creating a universal device capable of dry and wet shaving with gel. Soap foam pulls hairs away , which allows you to remove them as close to the root as possible without affecting the skin. The waterproof housing makes the device extremely convenient. You can use the razor even while taking a shower and without worrying about the safety of the working parts.

The mesh shaving system of three floating steel knives with a thirty-degree sharpening does its job with high quality and care. It is driven by a powerful motor that makes 10,000 rotations per minute. The device can handle even days of thick stubble. Despite this property, the device operates with virtually no noise or vibration. The retractable trimmer is a useful accessory for shaping temples, beards and mustaches.

The device operates autonomously from a long-lasting nickel-metal hydride battery , which is charged from the mains. The creators provide a low-battery indicator. The battery is adapted to current sources of any voltage and ensures continuous operation of the device for 45 minutes. This is enough for multiple shaves.

The device, with its stylish ergonomic design, will decorate a real man’s bathroom or take its rightful place in travel luggage, thanks to its autonomy and compactness.

The proposed accessory can create a feeling of freshness for the user and lift his mood throughout the day. A practical and functional item will serve as an excellent gift for a modern man.

Panasonic ES-6003 1Panasonic ES-6003 2Panasonic ES-6003 3Panasonic ES-6003 5

Pros:

• Possibility of wet cleaning.
• Power source: battery.
• Operating time 45 minutes.
• Full charging time 1 hour.
• Retractable trimmer.
• Remaining battery charge indicator.
• Triple shaving system with 3 shaving foils.
• Ni-MH battery.
• Motor speed 10,000 rpm.
• Dry/wet shaving.
• Blades are steel.
• Additional information: internal knives with 30-degree sharpening.
• Includes: travel case, cleaning brush.
• Indication: charging, discharging.
• Waterproof housing.
• Voltage: automatic switching.
• Non-slip insert on the handle.
• Shaving system: foil.
• Number of shaving heads: 3.
• Good price.

Minuses:

• Fixed shaving unit.
• There is no screen, and with it several necessary indicators.
• There is no charging or cleaning device.
• No clipper attachment.
• There is no compartment for collecting hairs.
• No charging stand.
• Problems with shaving in the neck area.
• Large network adapter.

Review of this razor in a video from experts:

https://www.youtube.com/watch?v=TqluG38BmO8&t=2s

How to do it manually?

Regardless of whether you decide to master manual sharpening or use small-scale mechanization means, the right thing to do is start with a block of the coarsest grain size and move on to finer ones. It is advisable to hold the knife perpendicular to the block. The most important thing is to maintain the same angle of inclination of the blade to the surface at all times. Movements when sharpening should be uniform and monotonous. The sharpening stone and the surface on which it rests should not move. To do this, you can put a piece of sheet rubber on the table, or, failing that, a moistened sheet of paper. Don’t forget to periodically check how much metal is being removed from the handle, and don’t press the knife too hard - the pressing force against the block should be small but constant. Moving the knife away from you or towards you is a matter of taste; to save time, I do it in both directions. To begin with, you should practice using a regular board instead of a sharpening stone, and, say, a short ruler instead of a knife. Hands will remember. Many consider the sharpening process to be a kind of movement meditation; in principle, that’s how it is. The need for constant control and concentration on the task at hand forces you to disconnect from external factors. It turns out to be a kind of zen.

VITEK VT-1373

The Vitek VT-1373 rotary electric shaver provides men with a clean shave and safe use. The floating shaving system easily follows the contours of the face and fits tightly to the skin. 3 movable shaving heads with rotating micro blades effectively remove hair. It provides a smooth shave even with uneven beard. A large number of heads allows you to shave wide areas in a short time. The retractable trimmer will accurately simulate the trimming of mustaches and temples or maintain the required level of stubble. Vitek VT-1373 shaves only on dry skin. The razor has medium dimensions (15.8×11.x7.7 cm) and light weight (0.126 kg). This model can operate both directly from the network and from a battery . The LED indicator displays the charge status. The battery holds power for 30 minutes and recharges in 2 hours . The fast charging feature makes it possible to shave in a hurry. The road lock protects against unintended activation.

VITEK VT-1373 1VITEK VT-1373 2VITEK VT-1373 3

Pros:

• 3 floating heads provide a fast and smooth shave.
• Quick recharge within 2 hours, one recharge is enough to use for 10 days, 3 minutes every day.
• Shaving system: rotary.
• Trimmer for trimming beards and sideburns.
• Red LED charging indicator.
• Equipment: protective cover, travel case, cleaning brush.
• Road block.
• Affordable price.

Minuses:

• Shaving method: dry.
• There is no screen, and with it many necessary indicators.
• There is no charging or cleaning device.
• There is no clipping attachment.
• There is no compartment for collecting hairs.
• There is no stand.
• The battery charge does not last long.
• Low power.
• Blades cannot be washed.
• The protective blade cover comes off.
• Slimy power button, and in general the entire surface of the holder.

The packaging and unpacking of this razor is in the video below:

How do you sharpen knives?

There are special tools in the form of professional sharpening. These are real machines for sharpening and straightening knives of any type. But as always, everything “tasty and worthwhile” costs a lot of money. What did you want?

Professional knife sharpening machine

The cheapest is, of course, on AliExpress (from 800 rubles and above), but such sharpening machines are also produced in our country. The price ranges from 3 to 30 thousand rubles. They come with a set of sharpening stones.

The simplest knife sharpener is an ordinary stone of various grain sizes.

SUPRA RS-202

SUPRA RS-202 is a foil electric shaver from SUPRA. The razor is primarily suitable for lovers of travel or long business trips. The compact size of the razor allows you to easily fit it into your bag without worrying about running out of space. Effective shaving is provided by two shaving heads with foil that follow the contour of your face, and thus the shaving process becomes a real pleasure, and the skin remains smooth and does not cause irritation.

This SUPRA RS-202 has a protective cap that will protect your razor blades from excess dust or other contaminants, and the trimmer will allow you to shape your sideburns or goatee. The battery charge is enough to use the razor for about 40 minutes in continuous mode. After a complete discharge, the battery can be restored in 10 hours. SUPRA RS-202 is the ideal gift for any man.

The model has an ergonomic body and well-thought-out button layout, making it easy to operate. , the Supra RS-202 electric shaver is suitable not only for dry shaving, but also for wet shaving (using softening foams and gels).

SUPRA RS-202 1SUPRA RS-202 2SUPRA RS-202 3SUPRA RS-202 4SUPRA RS-202 5

Pros:

• Operating voltage: 1.4 V.
• Power: 6 W.
• Shaving system: foil.
• Shaving method: dry / wet.
• Power system: battery.
• Number of shaving heads: 2.
• System for repeating facial contours: floating heads.
• Battery: battery life up to 40 minutes, charging time 8 hours.
• Waterproof housing.
• Trimmer.
• Charging indication.
• Protective cover.
• Brush.
• Affordable price.

Minuses:

• There is no screen, and with it many necessary indicators.
• There is no charging or cleaning device.
• The body is plastic. It slides in your hand and “crunches.”
• There is no clipping attachment.
• There is no compartment for collecting hairs.
• The protective cap does not stay in place.
• There is no road blockage.
• The power button is inconveniently placed.
• The kit does not include a case for storage and transportation and oil.
• It works loudly.

Necessary materials

Tools used for sharpening

For sharpening you will need the following:

• a piece of denim fabric of sufficient length and width
• a small block 15-20 cm long and up to 3 cm wide
• actually, a razor

You can use a foil or polyethylene sleeve as a bar.

After all the materials have been prepared, sharpening begins. The sequence of actions will be as follows:

Create a hard surface for sharpening

To do this, the block is placed in denim

1. Sharpening is done using “jeans” stretched over a block to give the surface being sharpened sufficient strength. To do this, the block is placed in denim.

Side guides, which should not be in contact with the surface being sharpened

2. It is recommended to use the side of the fabric on which the thickness of the texture is higher. In this case, this is the inside of the trousers. In this case, the block must be positioned in such a way that there is no contact between the sidewalls on the cassette and the sharpening device.

3. No contact is necessary because the sides are located above the surface of the blades. If they have contact with the surface being sharpened, then the blades will not have it. That is, there will be no sharpening process.

Blade sharpening.

Blade movement when sharpening

1. Once the whetstone is correctly positioned and the sharpening surface is formed, begin sharpening. To do this, place the razor at the beginning of the bar and begin its movement in the direction opposite to the one in which shaving is being done.

The reverse stroke of the blade is made without contact with the sharpening surface

2. It is necessary to make 150-200 movements to sharpen the blade. Usually, 50-60 movements are made in one direction in one pass, after which the direction of sharpening changes. At the same time, the razor moves in exactly the same way - in the direction opposite to the movement when shaving.

Nuances

A classic straight razor (“safe”) allows a man to effectively deal with overgrown stubble on his face. A good shave is only possible with a sharp blade. A straight razor should be sharpened at least once every 2-3 months.

The procedure can be done on your own at home. Its correct execution is the key to obtaining a good result.

Sharpening involves mechanical processing of the cutting edge of the tool.

You should sharpen the blade of the old “danger” in stages:

1. Carrying out rough sharpening. The procedure is performed to restore or correct the geometry of the leads that form the cutting edge of the blade plate (sting). At this stage, the problem of chipping is solved, and the edge bends to the side are corrected.
2. Finishing the tip and the blade plate itself. The manipulation is similar to honing in metalworking. At the second stage, the exact dimensions of the tip and the cleanliness of the blade surface are achieved. Finishing removes risks from the abrasive applied at the initial stage.
3. Formation of an ultra-thin cutting edge by straightening it.

How to properly sharpen a dull straight razor yourself:

• sharpening is a manipulation associated with the risk of injury. Follow safety regulations!
• ensure that the straightening belts are tightly tensioned - this will avoid bending the cutting edge;
• be sure to determine the correct sharpening angle;
• Avoid pressing hard on the blade. Otherwise, there is a risk of damaging it. The blade should always be in close contact with the surface of the sharpener;
• When performing movements in both directions, try to keep the pressure on the blade equal. Otherwise, you won’t be able to sharpen the tool evenly;
• Cover the comb with tape in advance to prevent it from being scratched;
• You can sharpen the “harm” to maximum sharpness by bringing the thickness of the cutting edge to a minimum. However, the tip will become brittle.

The optimal indicator of sharpness for a razor is its ability to easily, effortlessly cut hair “in weight”.

Methods for sharpening a razor

The best option would be to purchase a special sharpening device. Externally, it is a small plate coated with fine diamond chips.

How sharpening occurs:

1. Apply a small amount of shaving gel to the plate.
2. Guide the machine in the direction of shaving movement.
3. Repeat movements 25-30 times.

High-quality sharpeners can be purchased from the Razor Pit brand (Denmark), as well as its budget analogue - Zattoch (Ukraine). Chinese fakes, despite the minimum price, do not justify their purpose at all.

Blade sharpeners

Branded manufacturers produce branded sharpeners for all their product lines. They carefully select abrasive materials for the type of blades, ensuring not only optimal turning speed, but also preventing increased wear.

Step by step sharpening:

1. The surface of the tool is lubricated with shaving gel or foam to prevent overheating of the metal.
2. The knives are placed on the abrasive surface, then begin to be drawn in the opposite direction to the one in which the bristle cutting process is performed. The number of such forward-return movements must be at least 20.
3. Check the quality of sharpening and, if necessary, repeat steps from point 2.

Advantages:

• uniform turning;
• maintaining the guarantee;
• increasing the operating time of the tool.

The disadvantage is the high cost of sharpeners, in some cases it exceeds the price of the tool itself.

Leather belt

You can use a trouser belt in a similar way. It should be made of thick, high-quality leather, wide enough to accommodate the entire blade. Sharpening occurs on the back side of the belt; the procedure requires 25-30 passes.

Special pyramid

An original way with a minimum of costs is to use a cardboard pyramid. It must be made to size, and a pedestal with blades fixed on it must be placed inside. A small hole is cut into the body of the pyramid on one side and placed on the south side. The structure should remain in this position for a week, but it is forbidden to move it or touch it with your hands.

Food foil

Sharpening a razor on a roll of food foil is an effective, quick method. To do this, it is better to use the end of a new roll; there should be no dents or deformations on the foil. Repeat the movements at least 30 times, the direction is away from you.

Sandpaper

Having fine grit sandpaper (over 2000) on hand can also quickly restore sharpness. It needs to be slightly wetted, the movements are similar to the method of using a sharpening stone.

Method using GOI paste

GOI paste appeared almost a hundred years ago, and all this time it has been successfully used for polishing metals, including steel, ceramics, stone and some other surfaces. The popularity of this polishing product is explained not only by the excellent results after use, but also by its affordable cost. GOI paste is available in 4 types:

• for rough polishing;
• to give the surface a matte finish;
• for finishing and adding gloss.

GOI paste cannot be applied directly to a metal surface; you can use a soft cloth for this or pre-dilute the paste with any solvent.

Sharpening stages:

1. Using any container, the paste is diluted with vegetable oil.
2. Add available solvent.
3. The knife block of the electrical appliance is immersed in the solution.
4. Turn on the electric razor for the period that it usually takes to shave.
5. After all manipulations, wipe the knives.

Philips AT 750

At the moment, one of the leading companies producing electric shavers in the style of combining affordable price and excellent quality is Philips . We present to your attention the Philips AT750

Even the most biased consumers will really like the design of the razor. It is stylish and ergonomic . It will fit perfectly into your everyday routine and will highlight your taste and individuality. The razor handle has a comfortable girth and a rubber holder , which allows the device not to slip out of your hands and comfortably hold it for a certain time without straining your hand.

The front panel of the device is smooth and black, but the finish is made of a bright blue ribbed panel. AT750 device from Philips by a lithium-ion battery and from the mains. The battery life is 40 minutes without interruption, which is enough for 14 shaves , and the battery charge time is 8 hours , so the shaver is ready to use at any time of the day or night when needed.

The maximum power consumption of the electric shaver is 5.4 W , and in standby mode it drops to 0.5 W. The voltage switch stabilizes it in the range from 100 V to 240 V. On the body of the device there is an LED indicator, an indicator of the full charge of the battery and charging, an indication of the low level of battery charge, that is, its almost complete discharge. If you need to recharge the electric razor's battery, the indicator will notify you of this with a light signal.

Philips AT750 electric shaver has an Aquatec , which guarantees a fairly comfortable dry and wet shave. Wet shaving is recommended by dermatologists for men with fairly sensitive skin, but dry shaving is allowed in all other cases. of a variety of refreshing mousses, foams and shaving gels in wet shaving .

Philips AT 750 1Philips AT 750 2Philips AT 750 3Philips AT 750 4Philips AT 750 5

The contours of the face will follow the rounded heads, and the QuickRinse will allow you to rinse the device under running water after use or use the electric razor in the shower without harming the skin and health of a man. the electric razor using cleaning products and water. There is a recognized high-quality Super Lift&Cut system with three shaving heads that easily follow the individual features of the user’s face.

We can conclude that the Philips AT750 provides a smooth shave and excellent protection for even the most sensitive skin. With the help provided, you can always enjoy a refreshing shave without any damage, making your appearance simply perfect.

Pros:

• Number of shaving heads – 3 pcs.
• Battery life – 40.
• Battery charging time – 8.
• Non-slip insert on the handle.
• The shaving system is rotary.
• Floating heads.
• Indicator of charging, full charging, discharging.
• Battery type – Li-Ion.
• Waterproof housing.
• Movable shaving unit.
• Equipment: protective cover, cleaning brush.
• Voltage: 100 – 240 V, automatic switching.
• Shaving method – dry/wet.
• Weight.
• Design.

Minuses:

• Cleaning device - no.
• No trimmer.
• There is no charging stand.
• No fast charging.
• There is no screen, and with it many necessary indicators.
• There is no charging or cleaning device.
• There is no compartment for collecting hairs.
• No storage case.
• There is no possibility of working from the network.
• Expensive replacement blades.
• Long battery life to fully charge.
• Pulls out hair, especially on the neck. This causes severe irritation.

Review of this razor from experts:

https://www.youtube.com/watch?v=29eRsiaiego

Features of sharpening a straight razor

Razor accessories with an open long blade are not often used when there is a wide range of safety razors. Previously, such an item, in addition to its direct purpose, often served as a weapon for self-defense. To successfully shave with this tool, it is important to choose the right product and learn the rules for its use.

Tips for choosing and sharpening straight razors:

1. Beginners should pay attention to products with a wide, rounded blade. This makes it easier to adjust the angle of inclination and makes it more difficult to cut yourself.
2. The handle of the razor should be durable, fit comfortably in your hand, and not slip off when moving.
3. The opening angle of a good razor is 270 degrees. Closing must be without jamming or distortion.
4. It is better to store it in a special case, thoroughly washing and drying it after use.
5. The blade must be sharpened before each use using a whetstone or ceramic whetstone. Movements should be smooth, direction away from you, then towards yourself. After a couple of passes, the blade is turned over to the other side and the procedure is repeated.
6. After sharpening, you need to straighten the blade with a leather belt. This is necessary to remove possible chips and irregularities on the edge of the blade, which can seriously cut you.
7. Before editing, a thin layer of polishing paste must be applied to the surface of the belt. Straighten and tighten the belt, repeat the movements as when sharpening for each side of the blade.
8. After shaving, the blade is thoroughly washed to remove product residue under hot water. The razor is thoroughly wiped with a towel and put into its case until next time.
9. The undoubted advantage of a straight razor is the almost eternal service life of a high-quality blade.

In our age of accessibility of goods and even their abundance, useful advice on sharpening a disposable razor is as relevant as ever. “Working” tips on how to sharpen a razor with improvised means, as well as rules for caring for razor accessories will help extend the service life and keep the blade longer.

Step by step guide

Today, the most pressing request from men in forums and communities is as follows - how to sharpen the blades of a Vest razor.
This manufacturer offers high-quality machines with replaceable cassettes, which you can easily extend the shelf life yourself, without the help of a specialist. Most often, two devices are used for this action - a pyramid razor blade sharpener or ordinary denim. You can make a pyramid yourself from a material that is incapable of magnetization, for example, plexiglass or cardboard. It is secured with glue or tape; it is prohibited to use metal fasteners. Further sharpening is carried out as follows:

• mark the pyramid on a hard, straight surface;
• then the pyramid is oriented to the cardinal points;
• the razor blades should be placed along the pyramid in the north-south direction;
• the blades should lie in this state under the pyramid for 6-8 hours.

The same method can be used to sharpen blades for cassette razors such as Gillette and other brands.

Many men have been successfully practicing the technique for many years, noting its ease of use and high efficiency. Using a special device from RazorPit or Zattoch, blades on a cassette or removable blades are sharpened as follows:

• Apply a little shaving gel to the surface of the device;
• further along the abrasive surface, but in the opposite direction, as during shaving, movements are made with the machine;
• make 25-30 such movements at a time;
• At the end, the machine and working fixture will need to be rinsed with water.

Just 5-10 minutes of such manipulations will be enough to revive the blades of the machine and give the razor a second life. This will not only save money, but also provide a man with high-quality and effective shaving of stubble and mustache without irritation and other consequences.

How to sharpen electric razor blades?

Useful tips for caring for your machine

To extend the service life of knives, you need to consider the following recommendations:

• constantly maintain cleanliness, remove remaining hair and stubble;
• perform lubrication in a timely manner;
• Perform turning with materials and tools recommended by the manufacturer.

Intensive use of a razor leads to dull knives, as a result of which cutting becomes worse and hair begins to be pulled out. Irritation appears on the skin due to the increased amount of time in contact with the surface of the instrument. Finding replacements for electric razors is quite difficult.

Sharpening electric razor knives Watch this video on YouTube

Braun WF2s

The Braun WF2s men's electric shaver features build quality, full water resistance and advanced shaving technology . The triple shaving system ensures clean and smooth skin. It includes 2 grids and an integrated trimmer. The mesh surface of the OptiBlade captures hairs for maximum contact with the skin. The floating head adapts to facial contours. The long hair trimmer accurately models the facial hair pattern. This model has Wet & Dry : used for dry and wet shaving. Thanks to the sealed housing, you can use the razor without leaving the shower. And rubber inserts on the ergonomic handle allow you to hold the razor firmly in wet hands. The razor is easy to clean under running water. Braun WF2s Black holds a battery charge for 45 minutes of active use. A lithium-ion battery without memory effect will last a very long time. LED display shows charging status. The included protective cap will prevent mechanical damage.

Braun WF2s 1Braun WF2s 2Braun WF2s 3Braun WF2s 4Braun WF2s 5

Pros:

• Equipment: protective cover, cleaning brush.
• Indication: charging, fully charged, discharged.
• Waterproof housing.
• Voltage: 100 – 240 V, automatic switching.
• Trimmer.
• Battery: battery life 45 min, charging time 1 hour.
• Shaving system: foil.
• Shaving method: dry / wet.
• Power supply system: mains / battery.
• Number of shaving heads: 2
• System for following facial contours: movable shaving unit.

Minuses:

• There is no adjustment of the shaving unit's mobility.
• There is no screen, and with it many necessary indicators.
• There is no device for charging and cleaning.
• No hair clipper.
• There is no compartment for collecting hairs.
• No stand.
• The kit is missing a travel case.
• Doesn't shave well around the neck and hard to reach places.
• Lack of original lubricant included.
• Flimsy lid for the mesh.
• The floating head cannot be fixed.

Equipment and brief overview of this razor:

Conclusion

With patience and skill, every man can rehabilitate his electric razor by sharpening its blades. This will preserve the service life of the device for a long time and provide the man with high-quality and unhindered shaving of stubble. If you follow all the instructions and rules, home sharpening will be in no way inferior to that performed by a master. The highest quality method is considered to be sharpening with GOI paste, after which the service life is extended for another year.

Sources

• https://afmen.online/kak-zatochit-elektrobritvu.html
• https://fishki.net/2987433-ostree-britvy-kak-pravilyno-tochity-nozhi.html
• https://zen.yandex.ru/media/id/5975e28f3c50f73278d2f06d/5d81a402e882c300ac2f700d
• https://zen.yandex.ru/media/id/5ac9107e00b3dd8b5dc9727f/5d6e04c243863f00ac9c6102
• https://ilCosmetic.ru/uhod-za-telom/depilyatsiya/brite/kak-zatocit-britvu.html
• https://metalloy.ru/obrabotka/zatochka/nozhey-elektrobritvy
• https://setafi.com/elektrobritvy/kak-zatochit-elektrobritvu/

Let's sum it up

Using one of the above methods, if you have certain skills and patience, you can sharpen the razor blades yourself, which will extend their service life for a long time. The results of sharpening carried out at home, subject to all rules and recommendations, may not be inferior to the results after professional processing. Practice shows that when sharpening blades using GOI paste, they will work flawlessly for at least a year.

Subscribe to our Social networks

Using a professional kit

This set helps to sharpen knives correctly and quickly. At the same time, the master does not require any special knowledge. Just a few secrets of success - and the quality of work will not be inferior to the quality of sharpening from a specialist.

What does such a kit consist of? As a rule, it includes the following components:

• machine;
• a case for it;
• aluminum disk;
• cleaning composition;
• lubricant;
• brush;
• laser;
• magnet.

At first glance, such a task may seem difficult. It is necessary to consider the use of such items step by step.

1. Disassemble the cutting attachment. If you've never done this before, take pictures of each stage of disassembly. This will help you tighten the bolts in the correct sequence when assembling the product. To remove the knives, you will need a regular screwdriver. Place all the small parts that you remove during the process in some kind of box so as not to lose it.
2. Prepare the aluminum disk for work. First, you need to wipe it to remove dust particles. Then you should apply a special oil to it, which is included in the sharpening kit. Abrasive powder is directly involved in sharpening. It should also be distributed over the surface of the washer.
3. Attach the knives and laser pointer. During operation, these parts must be securely fastened. The blade is attached using a magnetic clip, and the sharpening device itself is located on the casing. After preparing for the process, the device must be turned on, indicating the appropriate disk rotation speed.
4. Sharpen your tool.
   To do this, the knives must be pressed tightly with the cutting part against the rotating aluminum disk. It is important that the blades are directed against the movement of the disc, and not in the same direction. While sharpening, smoothly move the device from the center of the disc to the edges. Important! Take your time during this work. It will take at least 1.5–2 minutes to sharpen each knife. If this is your first time doing this, spend more time on it, but do not make sudden movements. Carelessness can lead to damage to the cutting edge.
5. Demagnetize the knives and prepare them for attaching them to the machine. The special solution that comes with the kit is designed exactly for these purposes. Rinse the blade in this liquid. You can pour a small amount of warm water into a container and add a few drops of cleaning agent. Rinse the blades to remove small fragments of abrasive particles. For better cleaning of knives after sharpening, you can clean them with a brush. After this you can wipe them. It is very important that the moisture is completely removed before you put the knives back into the appliance.
6. Assemble the machine. The cutting device must be assembled in the same sequence. First, the knives are connected, and then they are placed in their grooves. Once all the bolts are firmly tightened, the tool is ready for further use.

READ MORE: Matte lipstick, which is the best for lips * Reviews of matte shades
Before you start sharpening, the machine should be carefully disassembled. Having disconnected the knife block, you can freely begin sharpening.

To obtain a high-quality result, it is important to choose the correct sharpening angle of the cutting blade. Try to strictly follow the one intended by the manufacturer. This way, the quality of the cutting tool will not be lost, and sharpening will take less time, as if the original angle had been broken.

Sandpaper method

To sharpen the blades, you will need sandpaper with a grit of 1200 and 2500. To sharpen the knives, you need to remove them. First, the knives need to be sanded with 1200 grit sandpaper.

To do this, you need to place them on paper, insert the shaft or cardan of the razor, press and turn on for 10 seconds. Next, the same thing needs to be done using 2500-grit sandpaper. After these manipulations, you need to clean everything and reassemble it in the reverse order.

For greater efficiency, it is better to take sandpaper without a soft backing.

Reference. This sharpening method is suitable for those razors that cannot be sharpened using GOI paste, for example, for the Era-100 electric razor.

How to sharpen a disposable razor at home with your own hands

Typically, disposable razors are not intended for long-term use, but throwing them away after the first shave is an unaffordable luxury . If you carefully care for the blade and avoid damaging it, the product will last for months without any problems and will help you out in an unforeseen situation.

Basic rules for maintaining and sharpening a razor:

1. After shaving, you must thoroughly clean the body of hair and detergent residues. It is best to use warm (not hot) water.
2. The machine must be stored in an upright position, avoiding direct sunlight and high humidity. If you need to take the razor with you on the road, the razor must be absolutely clean and dry.

It is most convenient to sharpen a disposable machine using denim or the back of a belt. As a rule, workshops do not sharpen such products, and sandpaper or a stone can damage the metal, which is usually not of the highest quality in such products.

Sandpaper method

One of the most affordable ways to solve the problem involves using regular sandpaper. To do this you will need:

• a sheet of sandpaper 1200 microns;
• a sheet of sandpaper 2500 microns.

In both cases, a square fragment measuring 100 by 100 mm is suitable. It is advisable that the base of the sheet is not soft.

The algorithm of actions is simple. To begin with, you need to remove the shaving head housing with the safety blades from the device and remove the rotating knives. After this, they should be laid out on a piece of sandpaper with a coarser grain.

Next, having aligned the knives with the shafts of the electric razor, you need to turn on the device for about 20 seconds. This will ensure a rough sharpening of the blades. In this case, there is no need to press the razor to make the knives fit more tightly to the sandpaper.

The force created by the weight of the device itself will be sufficient.

After this, you can proceed to the fine sharpening procedure by performing similar steps for 15 seconds using 1200 micron sandpaper. At the end of the procedure, the knives must be cleaned with a soft cloth and the razor must be reassembled.