How to choose the right multistage pump

Centrifugal multistage pump

Centrifugal multistage pumps are fairly common types of dynamic hydraulic machines. They are quite widely used in water supply and wastewater systems, in the chemical and nuclear industries, in thermal power engineering, in aviation and rocket technology. This article describes what features of the devices, their advantages, and how to install the units yourself.

What does this give?

Anyone who is familiar with the operation of compressor units will understand immediately.
In fact, the operating principle of multistage pumps is practically no different. The pumped liquid moves sequentially through sections, in each of which its pressure increases. The water pressure at the outlet of the device is determined by the total value created at each stage. This technical solution gives certain advantages to multistage pumps over traditional analogues.

One device, without additional elements included in the system, creates increased pressure in the pipe (up to 400 m). If we take into account that most private buildings have a complex water supply scheme, with several “points” for dispensing liquid and a significant distance from the source (well, borehole) from the house, this is a more than significant plus.
Relative noiselessness. There is no need to talk about the complete absence of sounds from a running engine, but their level is so insignificant that this is not taken into account. This can be explained simply - to create the required pressure, it makes no sense to use a large motor in the pump. In multi-stage models, the pressure increases due to the synchronous operation of several wheels. Consequently, they are characterized by an excellent combination of indicators such as power and generated pressure. This is already the third plus of devices in this group.

Do multistage pumps have any disadvantages?
From the point of view of practical application, there is only one - they are suitable only for working with clean liquids. It is understood that only the smallest fractions (contamination up to 100 g/m3) are allowed to be present in water, otherwise the efficiency of the device will sharply drop and the service life will be reduced. Many people put multi-stage pumps at a disadvantage because of their high price. Yes, they cost about 2.5 times more than traditional analogues. But an analysis of all aspects of their practical use shows that installing this particular device is sometimes more expedient. The fact is that to create the same pressure, if you purchase a model with one impeller, you will need a product with more power. And this characteristic directly affects its price. In addition, increased energy consumption cannot be discounted. Therefore, the savings are practically zero, and in terms of ease of installation (due to compactness), multistage pumps are preferable. And they are cheaper to operate.

How are devices in this group classified? They differ in the spatial orientation of the shaft on which the impellers are located. Vertical pumps are submersible models, while horizontal pumps are mainly surface pumps. To provide private buildings with water from an autonomous source, devices of the latest variety are mainly purchased. The fact is that they are more versatile and can be used for other purposes. For example, to increase pressure on the highway. You can get acquainted with one of the representatives of models of this type - MH 500C - its characteristics and cost by clicking on the link.

Horizontal multistage pumps (centrifugal)

The Vodomaster.ru online store values the trust of its customers and takes care of keeping their personal data secret from scammers and third parties. The Privacy Policy is designed to ensure that personal information provided by users is protected from access by third parties.

The main purpose of collecting personal data is to ensure adequate protection of information about the User, incl. his personal data from unauthorized access and disclosure to third parties, improving the quality of service and the efficiency of interaction with the client.

BASIC CONCEPTS

Website – online store “Vodomaster.ru”, located on the Internet at the address: vodomaster.ru

User is an individual or legal entity who has posted his personal information through any Feedback Form on the site with the subsequent purpose of transferring data to the Site Administration.

Feedback form is a special form where the User places his personal information for the purpose of transferring data to the Site Administration.

User Account (Account) – a User account that allows you to identify (authorize) the User using a unique login and password. The login and password for accessing the Account are determined by the User independently during registration.

GENERAL PROVISIONS

2.1. This Policy regarding the processing of personal data (hereinafter referred to as the “Policy”) was prepared in accordance with clause 2, part 1, art. 18.1 of the Federal Law of the Russian Federation “On Personal Data” No. 152-FZ of July 27, 2006 (hereinafter referred to as the “Law”) and describes the methods of use and storage by the Vodomaster.ru online store of confidential information of users visiting the vodomaster.ru website.

2.2. By providing the online store "Vodomaster.ru" with private information through the Site, the User freely, of his own free will, consents to the transfer, use and disclosure of his personal data in accordance with the terms of this Privacy Policy.

2.3. This Privacy Policy applies only to private information obtained through the Site. Personal information is information that allows, when used separately or in combination with other information available to the online store, to identify the client’s personal data.

2.4. The site vodomaster.ru may contain links that allow you to go to other sites. The online store is not responsible for the information published on these sites and provides links to them only to ensure the convenience of users. However, this Policy does not apply to other sites. Users who follow links to other sites are encouraged to review the privacy policies posted on such sites.

CONDITIONS, PURPOSE OF COLLECTION AND PROCESSING OF USERS' PERSONAL DATA

3.1. Personal data of the User such as: first name, last name, patronymic, e-mail, telephone, delivery address, skype, etc., are transferred by the User to the Site Administration with the consent of the User.

3.2. The transfer of personal data by the User through any Feedback Form posted on the website, including through the order basket, means the User’s consent to the transfer of his personal data.

3.3. By providing his personal data, the User agrees to their processing (up to the User’s withdrawal of his consent to the processing of his personal data), in order for the online store to fulfill its obligations to the client, sell goods and provide services, provide reference information, as well as for promotion purposes goods, works and services, and also agrees to receive advertising and informational messages and service messages.

3.4. The main purposes of collecting information about the User are accepting, processing and delivering orders, providing feedback to the client, providing technical sales support, notifying about changes in the operation of the Site, providing, with the consent of the client, offers and information about promotions, arrivals of new products, advertising mailings; registration of the User on the Site (creation of an Account).

PROCESSING, STORING AND PROTECTION OF PERSONAL INFORMATION OF SITE USERS

4.1. The Site Administration processes information about the User, incl. his personal data, such as: first name, last name, patronymic, e-mail, telephone, skype, etc., as well as additional information about the User provided by him at his own request: organization, city, position, etc.

4.2. The online store has the right to use “cookies” technology. Cookies do not contain confidential information and are not transferred to third parties.

4.3. The online store receives information about the IP address of the User of the site vodomaster.ru and information about the link from which Internet site he came from. This information is not used to identify the User.

4.4. When processing personal data of users, the online store adheres to the following principles:

Information is processed lawfully and fairly;
Information is not disclosed to third parties and is not distributed without the consent of the Data subject, except for cases requiring disclosure of information at the request of authorized government bodies or legal proceedings;
Determination of specific legitimate purposes before processing (including collection) of information begins;
Only the information that is necessary and sufficient for the stated purpose of processing is collected;
The processing of information is limited to the achievement of specific, predetermined and legitimate purposes;

4.5. Personal information about the User is stored on the website’s electronic media indefinitely.

4.6. Personal information about the User is destroyed at the request of the User himself on the basis of his official request, or at the initiative of the Site administrator without explanation, by deleting information posted by the User.

4.7. The request for deletion of personal information sent by the User must contain the following information:

for an individual:

number of the main identification document of the User or his representative;
information about the date of issue of the specified document and the issuing authority;
registration date via the Feedback Form;
text of the appeal in free form;
signature of the User or his representative.

for a legal entity:

request in free form on company letterhead;
date of registration via the Feedback Form;
the request must be signed by an authorized person accompanied by documents confirming the person’s authority.

4.8. The online store undertakes to consider and send a response to the User’s request within 30 days from the date of receipt of the request.

4.9. The online store implements measures to protect personal data of Users in the following areas:

preventing the leakage of information containing personal data through technical communication channels and other means;
prevention of unauthorized access to information containing personal data, special influences on such information (data carriers) for the purpose of obtaining it, destroying it, distorting it and blocking access to it;
protection against malware;
detection of intrusions and computer attacks.

TRANSFER OF PERSONAL DATA

5.1. The Vodomaster.ru online store does not disclose personal information about Site Users to third parties, except in cases prescribed by Federal Law No. 152-FZ of July 27, 2006 “On Personal Data,” or when the client voluntarily agrees to the transfer information.

5.2. Conditions under which the Vodomaster.ru online store can provide private information from its databases to third parties:

to satisfy demands, requests or court orders;
for the purpose of cooperation with law enforcement, investigative or other government agencies. At the same time, the online store reserves the right to report to government authorities about any illegal activity without notifying the User about it;
to prevent or investigate suspected wrongdoing, such as fraud or identity theft;

5.3. The online store has the right to use other companies and individuals to perform certain types of work, for example: delivering packages, mail and emails, removing duplicate information from customer lists, analyzing data, providing marketing services, processing credit card payments. These legal entities/individuals have access to users' personal information only when necessary to perform their functions. This information cannot be used by them for other purposes.

SECURITY OF BANK CARDS

6.1 When paying for orders in the Vodomaster.ru online store using credit cards, all transactions with them take place on the banks’ side in special secure modes. No confidential information about bank cards, except for notification of the payment made, is transmitted to the online store and cannot be transmitted.

CHANGES AND ADDITIONS

7.1. Any changes to the terms or conditions of the Personal Information Policy will be reflected in this document. The Vodomaster.ru online store reserves the right to make changes to certain sections of this document at any time without prior notice by posting an updated version of this Privacy Policy on the Site.

Practical recommendations

When choosing a multistage pump, it is better to focus on domestic devices. Firstly, there will be no problems with repairing the product. The same seals must be changed periodically. Secondly, our engineers take into account Russian specifics, primarily water quality. Consequently, pumps made in Russia will last much longer.
Consulting a specialist on choosing the optimal model will also not be superfluous. It will not be possible to take into account all aspects of the use of a multistage pump, correctly understand its characteristics and determine the required values of quantities without having sufficient specialized knowledge. Therefore, it is not a fact that the money will be spent rationally, but the result will meet expectations.

ALFATEP has been working in the Moscow region for a long time in the field of engineering communications. The company is engaged in both the supply of equipment and the development of projects for various systems and their installation. The warehouses constantly have a significant assortment of instruments of various types, and the staff includes highly qualified engineers and craftsmen. Just call the contact phone number and our staff will help you choose the optimal multistage pump model. At the request of the client, they will deliver the product to the address, install it, connect it and test it in action.

Types of centrifugal pumps

Units can be classified according to the following distinctive features:

By number of steps:

single-stage units;
two-stage;
multi-stage.

What is the number of fluid flows:

single-threaded;
with two streams;
multithreaded.

By what principle is liquid supplied to the impeller?

with spiral outlet;
along an annular outlet, with a guide vane;

What is the design of the impeller:

closed impeller;
open impeller.

How the drive is made:

using a coupling;
through the gearbox.

By shaft location:

vertical;
horizontal.

Glandless rotor pump. In this case, the engine rotor moves directly the fluid. The engine stator, which is constantly under voltage, is separated from the rotor by a special sleeve, 0.1 to 0.3 millimeters thick, made of stainless steel. The rotor bearings are lubricated by a liquid medium, which also performs the function of cooling the rotor. The pump shaft is mainly horizontal.
Dry rotor pump. Here the motor rotor does not come into contact with the liquid medium that is being pumped. They usually have a large fluid supply.

Advantages and disadvantages of centrifugal pumps

Compared to other types, centrifugal pumps have advantages:

In a wide range of flows Q, fairly high values of efficiency and pressure H are maintained, as a result of flat characteristics H = f(Q) and η = η (Q.
Increased rotation speed, which allows the pumps to be driven by electric motors and turbines.
The power change N has a smooth shape, which allows the pump to be started with the outlet valve closed or the check valve closed.
They have good stability in the operation of the devices and expansion of the technical values of H and Q with parallel and series connection of pumps, when working on one pipeline.
Transient processes occur smoothly when operating modes of hydraulic systems change.
The pumps are located above the liquid level in the flow tank.
Due to various factors, the performance of pumps H, Q, η changes. These factors are:

turning the diameters of impellers;
change in rotation speed;
change in frequency of power supply.

The low price of the pump, which is associated with the use of relatively inexpensive structural materials in the product:

become;
cast iron;
polymer materials.

Easy to maintain and operate.
High reliability during operation.
Large fluid supply Q.
Liquid flows with small, uniform pressure pulsations.
They work successfully on “contaminated” liquids.

The disadvantages of centrifugal pumps are:

The unit must be primed before starting it up.
They have a tendency to cavitation.
Reduced efficiency when pumping viscous liquids.
Low efficiency value with small liquid supply Q.
Centrifugal pumps are best used in the area of large water supplies Q and low and medium pressures H.

Advice: You cannot use such devices without first filling them with water.

Purpose

The main task of using units of this type of pumping equipment is to create the highest possible pressure in water supply systems.
In other words, multistage centrifugal pumps are designed for pumping water or other non-aggressive liquid, the temperature of which can range from 0 to 1000C.

Multistage centrifugal pumps can be used to achieve the following purposes:

equipment for an autonomous water supply system for a private home;
irrigation and watering in agriculture;
ensuring uninterrupted water supply in city utilities;
automatic operation of fire extinguishing systems;
ensuring the operation of mine drainage;
feeding steam boilers of boiler plants;
pumping inactive chemical liquids in production, etc.

From the above points we can conclude that multi-stage centrifugal pumps are used in those areas of human activity where it is necessary to create high liquid pressure.

You may be interested in an article on the classification of centrifugal pumps. Read an article about methods for diagnosing and repairing centrifugal pumps with your own hands here.