General information about metal spindles for CNC milling machine

Spread the love

Perhaps you are planning to upgrade your existing machine or are building a new router from scratch and need a good spindle for your hobby CNC machine.

In this guide, I have compiled a list of the best CNC spindles available in the market today.

Choosing the best CNC spindle for your machine will depend on the hardness of the materials you want to machine and the speed at which you need to do it. You can read a more scientific, theoretical approach to spindle selection in the article on spindle selection

If you don't have the time or patience to manually change the tool, you can opt for an automatic tool change (ATC) spindle, but it is more expensive compared to regular spindles.

The factors I considered when compiling this list were power output, spindle build quality, collet size, and cooling system.

I sorted them by power output, starting with the low power spindles and working my way up to the 4kW spindle.

At the end of this article, I discussed the factors to consider when choosing a spindle for your CNC.

1.5KW Water Cooled Spindle Kit

1.5KW Water Cooled Spindle Kit

1 & 220v 1.5kw ER16 water cooled spindle 4 bearings 80x220mm

1 & 220v 1.5kw 1000Hz inverter/VFD

1 & 80mm spindle bracket/holder

1 & 220v 75w water pump and 5m pipes

The balance between quality and power is what you get with the G-Penny machine 1.5KW ER16 spindle kit.

The spindle has a diameter of 3.14 inches and can be mounted to a CNC router using the included clamp.

This spindle kit includes a 1.5kW ER16 spindle, 80mm clamp and 220V VFD.

You can increase the speed of this motor up to 24,000 rpm at 1.5 kW power using a 220V power supply. But can only rotate clockwise. The speed can be changed using the variable frequency drive included in the kit.

However, the lowest stable speed you can achieve with this kit is 6000 RPM. You can use another VFD to reduce the speed.

The spindle has a pre-installed ER16 collet and can hold tools in the range of 0.02-0.354 in. (0.5-9 mm) with 0.002 in. runout.

This is a water cooled spindle made of stainless steel. The pump and cooling pipes are included in the kit. This spindle is suitable for engraving and cutting wood, aluminum and other soft materials.

The kit includes spindle, 220V 400Hz variable frequency drive, 220V 80W water pump, 16ft pipe.

Repair

Simple spindles have no electrical part. Repair comes down to replacing bearings, seals, clamping devices (chucks, collets) when they break. This is a normal plumbing job.

If the spindle and motor break down, everything becomes more complicated. The mechanical part may need to be repaired. If the electric motor burns out, the nature of the malfunction and the feasibility of repair are assessed in each individual case. It depends on the nature of the breakdown, the type of motor, the cost of spare parts, repairs and a new spindle assembly.

As you can see, different models of milling machines rarely have the same spindles. But with modern unification of production, it is quite possible for a variety of machines to have standard models with a built-in electric motor from one leading global manufacturer. In any case, on each specific machine, when repairing, servicing or replacing this unit, a study of its features and characteristics is required.

CNC Spindle Motor 2.2KW

CNC Spindle Motor 2.2KW

A complete CNC spindle kit for your new CNC build that can cut soft materials is what you get with this CNC spindle motor kit.

The spindle weighs 5 kg, and the entire kit weighs about 10 kg and includes the spindle motor, VFD, water pump, 16-foot water pipes, 2.75-inch dust brush, 13 ER20 collets, and 10 drill bits.

You can also buy a spindle without a kit by contacting the seller by email.

You can install the spindle on any frame that can accommodate a 3.14-inch diameter spindle. The kit comes with ER20 collets and has a runout of 0.0002 inches, which is pretty good accuracy.

You can change the spindle speed from 0 to 24,000 rpm using a variable frequency drive that provides 2.2 kW of power. The VFD supplied with the spindle speed control kit is a 220V, 0-400Hz unit.

The CNC machine spindle is water cooled and comes with a 220V submersible pump, making it suitable for long-term operation.

The spindle, VFD, and water pump together can draw about 15A of current, so you may have to provide the appropriate breakers to set it up.

The connectors used are aircraft type plugs and provide good waterproofing.

Well-labeled wires, documentation and videos will guide you through the installation process. There are also plenty of videos on Youtube about setting up these spindles to help you along the way.

CNC Spindle Motor 4kw

CNC Spindle for CNC machine 4 kW

This spindle weighs around 8kg and is a sturdy spindle. Its size is 100 mm.

With this spindle, you get an ER20 collet that accepts tools with shaft diameters ranging from 0.039 to 0.512 inches and has a runout of 0.0004 inches.

HongYang also produces ER11 1.5KW, ER25 4KW, ER32 7.5KW spindles, all of which are available on AliExpress

You can change the spindle speed from 1 to 24,000 rpm. To control the spindle speed, you need to connect it to the VFD.

It is rated at 220V, can produce 4kW of power and draw a maximum current of 10A at 400Hz.

The spindle is water cooled and can be used for routing or engraving wood, stone and soft metals such as aluminum.

These spindles are quiet and well balanced, providing good stability when working at high speeds.

The construction material is durable and can last a long time.

For woodworking machines

Woodworking milling machines use practically the same spindles as metalworking ones. Simple machines use straight shafts with a chuck or collet to clamp the cutter. Also shafts with a threaded clamp for attachment cutters.

The image shows the spindle of a simple wood router with a disk-mounted cutter.

Milling cutters of various profiles are mounted on them, for selecting a groove/tenon for lining, plinth profiles, tenons for splicing, processing cylindrical parts in two passes (on both sides in a semicircle), etc.

Modern computer-controlled woodworking milling machines use complex spindles with their own electric motor, described above.

Feature of spindles for woodworking at higher speeds. At the same time, the lubricant in the bearings is prone to overheating, so heat-resistant lubricants are used for high-speed components.

Which spindle to use for steel machining

Generally, steel machining requires low RPM (compared to the RPM of aluminum and wood) and high power of a CNC spindle.

The ability to machine steel also depends on the rigidity of your machine and the tools you use. For steel, it is recommended to select a spindle with high power at low speeds.

The forces acting on the tool and therefore on the spindle are greater when machining hard materials such as steel.

It is advisable to choose a spindle with a steel body, rigid structure and ceramic bearings. Ceramic bearings can withstand more beating than metal ball bearings.

The power and speed of a CNC router spindle is also determined by the type of machining operation you are going to perform.

For example, drilling steel requires more energy than milling or turning steel.

Typically, when processing steel, the milling speed is 50% higher than the drilling speed.

In the case of turning, the speed can be 100% higher than when drilling.

For businesses that need to do heavy production work, I highly recommend ATC spindles over regular CNC spindles.

Advantages

The capabilities of a CNC milling machine are determined by the type of spindle chosen and its technical characteristics. Milling spindles have the following advantages:

1. The overall strength of the machine structure increases significantly.
2. Equipment efficiency increases.
3. Modern mechanisms are made from high-quality materials that can withstand heavy loads.

To ensure that the equipment lasts longer and the workpieces do not deteriorate during processing, we must not forget about installing a cooling system. If water cooling is chosen, you need to figure out where to hide the hoses for supplying liquid and install a container with the liquid itself. When choosing an air cooling system, we must not forget about cleaning the filters, which become clogged when working with various materials.

Factors to consider when choosing a spindle for your CNC router

Size and weight.

The size of the motor determines whether it can be installed correctly on your CNC router. It is also important to consider the shape of the spindle as there are cylindrical and square spindles.

Make sure your CNC router frame is strong enough to support the weight of the spindle. In stepper motors, the axes must have sufficient torque to handle the weight of the motor.

Speed ​​and power

Spindle speed determines the range of work you can do. For example, cutting soft materials requires low speed because large pieces of material can be cut off easily.

In the case of metals, cutting large pieces of metal is difficult and therefore the amount of material removed in one pass is significantly reduced.

To achieve high cutting speeds, you will have to increase the spindle speed to make more cuts per minute.

Spindle power is another limiting factor for your projects. A spindle with sufficient power can ensure smooth cutting and prevent damage to the workpiece. On the other hand, a spindle without sufficient power can cause it to stall.

Cooling type

Very high RPM spindles tend to heat up quickly, so it is important to ensure the spindle is properly cooled.

The most common types of cooling available for spindles are air cooling and water cooling. Water has a higher heat capacity than air and therefore can remove more heat from the engine. It is better to use distilled water instead of regular water to avoid damaging the spindle.

Air-cooled spindles generally have better torque characteristics than water-cooled spindles due to their design. But air-cooled spindles produce more noise than water-cooled spindles.

In general, water-cooled spindles last longer and provide better accuracy than air-cooled spindles.

The main problem when operating a water-cooled spindle is the influence of climatic conditions. Because in cold weather, water can freeze and prevent the spindle from rotating.

Water cooling is preferred over air cooling if the spindle is used for extended periods of time.

Speed ​​control

The low power spindle can be controlled by PWM (Pulse Width Modulation) motor drivers.

VFD (Variable Frequency Drive) is preferred for high-power spindles as it provides better control and stable performance.

It is necessary to select the correct VFD for your spindle. An incorrect configuration can immediately damage your spindle. Make sure the voltage, current and spindle frequency ratings match your VFD (if you already have a VFD).

You can also control the spindle speed using a controller that runs your stepper motors. I talk about GRBL CNC Controllers in detail here - Best GRBL CNC Controllers for Hobbyists.

Device and characteristics

Metal processing on machines has become widespread. This is not surprising, with the advent of mechanized equipment, labor productivity has increased significantly, and the process of manufacturing metal products has become much simpler - workers spend less time on one production cycle.

The creation of machine tools also provided:

• Higher quality parts, good accuracy class.
• Reducing the final cost of all work.
• Increased production speed.

Almost no machine tool can operate without spindle locking – we’ll explain this using the example of a lathe. This is an element that is responsible for strong and reliable installation of the workpiece in one place. If we take a turner as an example, he attaches a metal bar or shaft between two headstocks, on one side of which such a holder is installed. The second very simple illustration is a drill. Here, in order to hold a drill or other tool, you also need to mount it inside the spindle.

The word itself is of German origin. Spindel is a spindle, that is, something that has the ability to rotate in different directions. Structurally, it is a shaft. The term itself is mainly used in such areas as machine tool building, metalworking and woodworking, respectively. This is an extremely important element; without it, the operation of not a single device can be imagined. The task of the part is to transmit the force generated by the electric motor to the workpiece made of metal, wood, or plastic. A device for centering and clamping this bar is attached to the shaft.

Let's explain again with a simple example to understand that there are two main purposes - to rotate and to hold the workpiece. A lathe has a spindle. A gear is attached to one side, through which force is transmitted. A bearing is located at the second edge of the shaft. A clamp chuck is attached to it.

But, it would seem, why else is it needed if you can attach a metal or wooden sample directly to the gearbox or gearbox? The fact is that these parts of the machine are not adapted to increased vibrations and high loads; they will simply break under them. But the shaft can become an intermediary, which takes on all mechanical (and thermal) influences. In addition, on one side there is a cartridge that has fastening elements - threads, splines, grooves, that is, they are universally suitable for the specific purpose of the fastener.

What are the features of the spindle device:

• Fastening is carried out using a rolling bearing. This is a durable unit, standard, but it also has different designs. For example, some may be vibration resistant, while others may be cheaper. Machines equipped with a cooling and lubricating fluid supply system work much better, because in this case the bearings experience less stress and friction, thereby significantly increasing their service life.
• The shaft receives its main rotational movement from an asynchronous motor. It is installed in the equipment housing - usually in the right headstock. At first, electric motors were powered only from three-phase sources and were installed directly in factories. They were believed to have higher power. But now they produce equipment that is powered by 220 V, so it can be placed under normal conditions - often turning or milling machines are located in garages and other “home” buildings for personal use.
• The spindle can receive rotational motion directly from the electric motor, but more often through an additional component, such as a belt. The belt drive is convenient - this part is inexpensive, easy to attach, and also easy to use, but at very high speeds it can slip. In such cases, when high speed is needed, gears and gears are installed.
• The main fastener, which is located at the edge of the shaft, is the collet chuck. This allows for reliable fastening of a shank of any diameter. Almost all tools for metal cutting and drilling are equipped with such a tip (tail), and if not, then they have to be attached along the outer edge, which is much less reliable and allows for significant discrepancies and vibrations.
• It is very important in industrial production to have a cooling system on lathes or milling machines. It is of great importance - it extends the maximum period of operation, as well as the time of continuous metalworking.
• The most complex spindles are found in CNC equipment. The fact is that the presence of a numerical control panel makes it possible to manufacture parts with maximum accuracy. This, in turn, requires minimal vibrations. Such high-quality equipment can be ordered online on the company’s website. Here you can find high-quality machines for processing metal workpieces.
• The degree of shaft fixation directly depends on the rotation speed. The higher it is, the more securely the fastening should occur.