Sometimes after work there are broken drills left, which can not be thrown away, but used to make a wood cutter. This device is perfect for making blind holes in wood for bearings. This homemade product will be especially useful and relevant for furniture manufacturers at home. If you strictly follow the action plan outlined in this article, you can get a good cutter. But you shouldn’t place high hopes on it, since a purchased carbide spiral cutter is much better. And for regular work, a homemade tool is not suitable; it is recommended to buy high-quality tools.
How to make a motorbike from a trimmer with your own hands?
Making a motorbike with your own hands from a lawn mower is not as difficult as it might seem at first glance. First, determine what power the engine on the trimmer is. It must be at least 2 horsepower. Otherwise, the future unit will not be able to travel a long distance, or even not move at all.
The next stage is the design of the drive. To do this, you will need to make a drive pulley (attached to the motor), a driven pulley and a special frame for the motor. It is recommended to select a belt that transmits torque at the end of the assembly, based on the dimensions of the entire structure.
You can install the engine from a trimmer on a bicycle by making a special small frame from scrap metal scraps. The second point is attaching this structure to the bicycle. It must be reliable and at the same time easy to maintain. This suspension must be securely attached, resistant to vibration and, preferably, quickly and easily detached.
There are two mounting options:
- bolting;
- fastening by welding.
Each method has its pros and cons. Take into account all the features of your equipment and its operating conditions, and build on these data when choosing a mounting option.
Additionally, do not forget to attach parts such as a small fuel tank, exhaust pipe. It would also be a good idea to install an additional brake, since a bike with a trimmer engine will be much faster and more powerful than a regular one.
We also invite you to watch the video, which shows the process of constructing a motorbike from a trimmer:
How can I replace a gasoline scooter?
The Razor company provides its solution to this problem: we present several scooters with an electronic battery, which, in terms of their technical features, are no worse than a scooter with a gasoline engine. Now in our online store you can find two main models of electric scooters, which are perfect for effective trips around the city.
Girls love to ride no less than boys. And some girls will even give all the guys a head start.
Razor company provides various scooters for teenagers that meet all technical and.
Why is it that now almost all adults, completely stern people want to buy an e-scooter? To this question.
Do-it-yourself scooter with a motor from a trimmer?
A homemade motor scooter with an engine from a trimmer is an excellent home transport for entertainment, traveling short distances outside the roadway (on sidewalks and park paths, for example).
Based on the characteristics of this type of transport, it will have the following technical characteristics:
- will be able to develop low speed (no more than 40 km/h);
- the small diameter of the wheels will cause little stability, which can lead to the scooter skidding;
- such equipment is not intended for heavy loads and transportation of heavy loads;
- Children should not be trusted with such a “toy” without adult supervision.
The assembly process itself is relatively simple. First, find an old scooter (if you don’t have one, you can weld a similar frame yourself). If you take an already assembled unnecessary scooter, it is appropriate to strengthen its frame with a 15 mm square metal profile.
Next you need to choose the appropriate wheels. They should be small in diameter, but wide enough and stable. Wheels from a garden cart or a go-kart car are ideal.
A chain drive will transmit power from the engine to the rear wheel. To do this, you need to make a gearbox. This is the most difficult stage of construction. The bicycle gear must be secured to the coupling of the lawn mower motor. First, the dimensions of the coupling should be adjusted to the gear (cut off the teeth from it, make it thinner by turning it on a lathe). The best way to fasten the coupling and sprocket is by shrink fit or welding. Next, you need to connect the second bicycle sprocket with the adapter hub, which in turn must be seated on the shaft, and the shaft on bearings.
The second sprocket and brake pad are secured using another hub on a fixed shaft. Brake and gas levers and cables can be reinstalled from a moped or purchased at a car store.
Required materials and tools
If you need a wood cutter, but you can’t go and buy it in a store, but you have a metal drill at home, you can easily and simply sharpen it into a tool of the desired diameter. A steel drill is intended for metalworking, which means it will withstand drilling wood just fine.
To make a cutter, in addition to the metal drill itself, you will need the following materials and tools:
- Bulgarian;
- file;
- drilling machine (preferably vertical);
- router or drill.
Also, for the convenience of the work process, it is necessary to prepare a marker or tape, a piece of wood for testing the resulting attachment.
In some cases, additional tools and materials may be required to make work more convenient.
Rules for operating a homemade moped
To extend the life of a moped with a trimmer motor, its owner needs to adhere to a number of important rules.
Their list includes:
Also, the owner of a bicycle with a trimmer motor will need to monitor the weight of the cargo transported on the homemade product. If the luggage is too heavy, it can lead to overheating and serious damage to the engine, as well as other mechanisms of the device.
Source
Design Features
The device uses an electric motor that runs on a built-in high-capacity battery. In addition to this part, any described vehicle consists of the following components:
- frames - metal or plastic;
- wheels;
- brake system;
- body kit and electronics.
A Li-On or Li-Po battery is used as a power source. Depending on the volume of blocks installed, the electric scooter can travel distances of up to 50 km. Some models have a gasoline internal combustion engine; as a rule, their travel range is higher, as is their speed. The design of the proprietary device also includes a gearbox with variable speed control. Operating current is supplied to the electric motor through a centralized wiring system from power supplies or a generator. All major electronics are usually enclosed in a sealed box that completely blocks moisture from entering.
Electric scooters weigh approximately 15–20 kg, so they can be lifted if necessary. You can charge the device from any outlet; it takes about 6 hours. You can make such a product yourself, but before you make an electric scooter, you should prepare everything you need.
Frame
Wheels
Brake system
Electronics
Battery
Individuality of choosing a gasoline engine for a bike
A bike with an F50 velomotor.
Like any other thing, the motor must be taken in accordance with your expectations and the tasks assigned to the device. low gas mileage is important to you , then these are the only units. The power and individuality of fastening are important, then it is necessary to pay attention to other signs. Constantly study the reviews of other owners, contact consultants. Having collected as much information as possible, it will be easier to navigate the products.
Are you looking for the perfect model? According to reviews, a product with a reduction gearbox with a gear ratio of 5:1 has the highest level of reliability Such a unit already has internal lubrication, eliminating the problem of frequent maintenance.
- for guys and ladies
Compressor
The craft consists of using an air blower from some device and using a chainsaw motor as its drive. If it is from an air conditioner, then you can make a device for quickly inflating the wheels of a car.
The procedure for making a compressor from a chainsaw:
- Make a mounting plate from sheet metal. On one side, 2 holes are drilled through which it is attached to the chainsaw instead of a tire. On the other hand, a compressor is placed.
- A coupling and pulley are installed on the supercharger drive shaft.
- Place the second pulley on the output shaft of the saw motor.
- A belt is placed on the pulleys to transmit rotation.
- The inlet pipe of the supercharger is equipped with an automobile oil filter with oil residues. Air through it is sucked in with oil particles, which reduces overheating of the compressor during operation.
To start the device, turn on the chainsaw motor. When it picks up speed, the coupling is activated and the supercharger starts working. A hose is connected to its outlet pipe, through which the car’s wheels are inflated.
Gasoline scooters: properties, pros and cons, operating tips
Typically, a scooter is propelled by physical force. But models with artificial drive have emerged - we are talking not only about electronic, but also about gasoline devices. It's useful to know what they are.
Preparing to assemble a scooter from a lawn mower
In its basic design, a scooter with a power unit from a household trimmer is very similar to a motorbike. The difference between them lies in the weight and dimensions of the homemade product - a motor scooter is much lighter and more compact than a moped, so for its manufacture the designer can use engines with a power of up to 3-4 liters. With.
In addition to the power unit from the trimmer, to assemble the scooter the manufacturer will need:
- metal frame from a regular scooter;
- components that need to be removed from the old bicycle in advance. These include wheel bushings, sprockets, a cable, as well as a drive chain with a roller, the gear ratio of which must be at least 4;;
- zero resistance filter;
- chain gearbox with gear ratio 1:3;
- disc brake assembly from an old bicycle;
- metal pipes and plate;
- screws, nuts and other fastening elements.
All assembled elements, especially the frame used by the scooter, will need to be checked for rust and defects. There should be no signs of corrosion on them, otherwise the homemade trimmer will quickly become unusable.
Wheels
Wheels are divided by size into micro, mini, midi and maxi. The first have a size of less than 20 cm, the second - 20 cm, the third - from 25 to 30 cm, the fourth - more than 30 cm.
Note!
DIY induction heater ♨️ - reviews of the best manufacturing options. Varieties of homemade device designs + step-by-step master class (160 photos)
Do-it-yourself Gauss cannon: TOP-130 photos of the best ways to create it yourself. Design features + master class for beginners
DIY clamps - a step-by-step master class for beginners. Schemes for manufacturing different designs + 170 photos
The choice of wheels to be installed on the scooter depends on its operating conditions. If you drive on smooth roads, then micro-sized wheels are suitable. An electric scooter with them will be light and compact.
If the roads are of average quality, with small cracks and unevenness or are paved with tiles, then the mini option is better. If you plan to move on poor asphalt or dirt roads, then it is necessary to install midi or even maxi size wheels. Inflatable wheels are also suitable.
