Prices for pipe welding in 2022 in Moscow and the region
A good welder will never be left without work. The only thing he constantly has to deal with is low prices for welding.
Some customers take into account only the cost of the weld, without giving due attention to the various difficulties in its implementation. So, for example, when work is carried out in an unheated room or in cramped conditions, wages should always be higher.
What prices for pipe welding are relevant in 2022? How many times does the complexity factor of work increase when laying pipelines at height, etc.
You can order from us
pipe welding
gates
stairs, railings
Decorative fencing
Fences
To create a permanent connection between two or more metal elements, welding work is performed. Depending on the method of influence, welding can be arc, gas, laser, plasma, electroslag, etc.
The most popular is gas welding. New interatomic bonds are formed in this case by gas-flame exposure of the metal and heating it to the melting temperature. No less common is electric arc welding with a coated electrode. It allows you to connect both small and large parts into single structures. For operations with stainless steel and non-ferrous metals, argon-arc welding is used on special semi-automatic machines.
Prices for welding work in Moscow and the region
First, let's look at the approximate prices for pipe welding:
- The nominal diameter of the pipe is 15 mm (1/2″) - the cost of one joint is 210 rubles, the cost of welding one centimeter of pipe ranges from 20 to 25 rubles. The length of the weld seam is 6.69 cm.
- Conditional diameter of the pipe is 20 mm (3/4″) - the cost of one joint is 265 rubles, the cost of welding one centimeter of pipe is 26 rubles. The length of the weld seam is 8.42 cm.
- The conditional diameter of the pipe is 25 mm (1″) - the cost of one joint is 315 rubles, the cost of welding one centimeter of pipe is 26 rubles. The length of the weld seam is 10.52 cm.
- Conditional diameter of the pipe is 32 mm (1 1/4″) - the cost of one joint is 380 rubles, the cost of welding one centimeter of pipe is 26 rubles. The length of the weld seam is 13.28 cm.
- The nominal diameter of the pipe is 50 mm (2″) - the cost of one joint is 440 rubles, the cost of welding one centimeter of pipe is 23 rubles. The length of the weld seam is 17.9 cm.
In many companies that provide welding services, the above prices for pipe welding also include consumables. These primarily include electrodes.
That is, if you order pipe welding, then in most cases you do not need to buy electrodes yourself. Read about how to choose electrodes for an inverter on the website.
However, the prices are approximate and may differ depending on the complexity of the work, as well as other welding features. Here, everything depends on the so-called complexity coefficient of work.
COST OF WELDING WORKS
| Type of work | Price |
| Various types of welding (arc, argon, semi-automatic, gas) | from 35 rub/cm |
| Pipe welding | from 70 rub/cm |
| Welded fencing (grids, gates) | from 550 rub/sq.m. |
| Fences (including standard welded, chain-link fences, corrugated sheet metal) | from 750 rub/sq.m. |
| Lattices | from 1,800 rub/m2 depending on the type |
| Decorative fencing | from 2,800 rub/m2 |
| Stairs, railings | negotiable, depending on model |
Calculate the cost of pipe welding
PipeNumber of seamsTotal0 rub.0 rub.Price list
Our company selects welding technology depending on the characteristics of the alloys - alloyed, low-carbon, chromium, etc.
Depending on the type of metal, the optimal type of electrode is selected.
The price of 1 cm of rolled metal welding depends on the thickness of the metal:
| Metal thickness, mm | Cost of 1 cm of seam, rub |
| 1.00 — 3.00 | 15.00 |
| 3.01 — 6.00 | 20.00 |
| 6.01 — 10.00 | 25.00 |
| 10.01 — 14.00 | 35.00 |
| 14.01 — 20.00 | 50.00 |
List of welding works
With our help you can:
- weld pipes (we also offer pipe cutting and bending);
- produce various metal structures - frames, canopies, stairs, gratings, fences, as well as small architectural forms for a private house and cottage;
- weld and repair gates, gates and fences.
By using our metal welding services, you:
- save money on purchasing expensive finished metal structures;
- get the opportunity to create customized products that best meet your requirements;
- diversify your landscape and interior with unique designs;
- reduce the time spent searching and manufacturing the necessary parts and elements.
Our managers will be happy to answer all your questions by calling +7 (495) 7777 923 . You can also contact us by filling out the online contact form directly on the website or requesting a call back.
We work with both companies and individuals . All electric welding work is performed by experienced, highly qualified specialists in compliance with established welding technologies. We guarantee the reliability, quality and strength of welded structures.
WHAT DOES THE PRICE DEPEND ON?
Prices for welding work in the price list are formed depending on the following factors:
- type of welding (operation of laser equipment is more expensive than a transformer);
- type of profile (channels, angles and tees are easier to weld than pipes or sheets);
- characteristics of the metal (working with ferrous steel is cheaper than working with stainless steel, brass or aluminum);
- seam thickness;
- urgency.
MECHANIZED FINISHING OF PREMISES QUALITY REPAIR OF APARTMENTS AND HOUSES MOSCOW / MO
Most frequently asked question:
How much does the “pie” cost from plastering to painting?
Answer:
The basic “pie” from high-quality plaster (without plaster) to airless painting (without painting), we estimate from 1750 rubles.
up to 2500 rub.m2, without materials. The price and composition of the preparation “pie” depends on the finishing coating, which can be wallpaper of various qualities, from non-woven to silk, paint of varying degrees of gloss and application method, decorative plaster of various classes, and structures. This or similar high-quality multi-stage surface preparation for airless painting of walls and ceilings, a “multi-layer cake”, consists on average of 11 main stages of forming and protecting the plane/surface. The formation of a plane and preparation of the surface for airless application of paint, thin decorative plaster or delicate wallpaper includes the following stages of working with a basic, high-quality plastered surface: 1. Preliminary machine grinding of the plaster followed by dust removal. The work is carried out under an oblique developing light.
2. Airless priming after the main operations to form the plane
3. Basic leveling of the plane with polymer or gypsum putties SEMIN, Knauf, etc. Manual and mechanized application of gypsum mixtures and ready-made polymer pastes. Work is carried out under developing light
4. Reinforcement, protection, separation of surfaces, formation of the geometry of external and internal corners, corner-forming tapes Strait-flex tuff-tape, Knauf Kurt, special. profiles, insulating tapes Knauf Trennfix..
5. Gluing SEMIN V40 fiberglass onto the finished special. glue, etc.. Work is carried out under developing light
6. Stabilization of fiberglass - impregnation with Semin AIRLESS special primer. Work is carried out under lensed light
7. Delicate, finishing, manual grinding of the fiberglass joints on the outer corners. Work is carried out under a scythe, developing light
8. Final airless application of SEMIN, KNAUF or similar putties to form the final surface of the planes. Work is carried out under lensed, oblique, developing light
9. Finishing the formation of external and internal corners using various mechanical and manual methods and milling - fine finishing grinding
10. Dust removal of the surface in three stages
11. Protection of external corners with temporary profiles, covering the surface - drying before defect detection and application of GGP primer, primer-paint, paintwork materials, or other finishing decorative coatings
*Equipment we use for the above work:
a. High pressure airless pumps - Graco, Low pressure air turbines - Graco, etc.
b. Grinding and dust removal machines - Festool, Mirka, etc..
c. Lighting - Festool SYSLITE STL 450 control lamp, Lossew Lamp developing light, Ergoliss painter's lamp, SCANGRIP NOVA 10K paint spotlight and other equipment of this class..
d. Hand tools - Sheetrock, Festool, Mirka, Wooster, Semin, Storch, Olejnik and other equipment of this class..
PS After preparing the surface for airless painting, we strongly recommend leaving it for at least 20 days for the polymer materials to shrink. After 20 days, before painting the room, we make minor adjustments to the surface under developing light, after which we apply primer and paintwork either mechanically or manually.
WELDING OF STEEL PIPES
The larger the diameter of the pipe being processed, the larger the circumference. In turn, this directly affects the consumption of electrodes, gas and the amount of work done. Therefore, the cost of this service depends on the size of the pipe being processed. We work with rolled pipes with diameters from 15 to 300 mm.
In addition to gas and electric arc welding machines, we have TIG and MIG-MAG machines. We strictly comply with current standards, norms and rules. Extensive production control has been introduced.
Price list for welding
| Pipe diameter | Price per joint | Price per cm |
| from 300 mm | from 3,800 rub. | from 15 rub. |
| from 250 mm | from 3,200 rub. | from 15 rub. |
| from 200 mm | from 2,500 rub. | from 15 rub. |
| from 150 mm | from 950 rub. | from 15 rub. |
| from 120 mm | from 750 rub | from 15 rub. |
| from 100 mm | from 620 RUR | from 15 rub. |
| from 85 mm | from 580 RUR | from 20 rub. |
| from 75 mm | from 480 RUR | from 20 rub. |
| from 50 mm | from 350 rub. | from 20 rub. |
| from 40 mm | from 320 rub. | from 22 rub. |
| from 30 mm | from 300 rub. | from 22 rub. |
| from 25 mm | from 240 rub. | from 22 rub. |
| from 20 mm | from 180 rub. | from 22 rub. |
| from 15 mm | from 930 RUR | from 22 rub. |
We accept orders for welding work on the production of tubular flange supports (type OT) with a height of one to four meters. All connections are made by certified welders with extensive experience.
Such metal structures have 2 main elements:
- body - thick-walled pipe with a diameter of 76/60, 108/76 and 108/60 mm;
- end connectors - flanges with a diameter of 240 mm.
It is possible to manufacture custom-made embedded products (ZD type) 1 meter long. The metal structure is made from pipes with a diameter of 60, 76 or 108 mm.
- Ø76/60(57)
- Ø108/76
- Ø108/57
- Mortgages
| Name | Height | Flange | Center distance | Tsnea |
| OT - 1 | up to 2.5 m | ø240 s8 | 175 mm | 2,000 rub. |
| OT - 2 | 3m | ø240 s8 | 175 mm | RUB 2,200 |
| OT - 3 | 3.5 m | ø240 s8 | 175 mm | RUB 2,400 |
| OT - 4 | 4 m | ø240 s8 | 175 mm | RUB 2,750 |
| *kerchief 80 rubles for 1 piece. | ||||
| Name | Height | Flange | Center distance | Price |
| OT - 5 | up to 2.5 m | ø240 s8 | 175 mm | RUB 2,400 |
| OT – 6 | 3m | ø240 s8 | 175 mm | RUB 2,700 |
| OT - 7 | 3.5 m | ø240 s8 | 175 mm | 3,000 rub. |
| OT - 8 | 4 m | ø240 s8 | 175 mm | RUB 3,600 |
| *kerchief 80 rubles for 1 piece. | ||||
| Name | Height | Flange | Center distance | Price |
| OT - 9 | up to 2.5 m | ø240 s8 | 175 mm | RUB 2,100 |
| OT - 10 | 3m | ø240 s8 | 175 mm | RUB 2,400 |
| OT - 11 | 3.5 m | ø240 s8 | 175 mm | RUB 2,700 |
| OT - 12 | 4 m | ø240 s8 | 175 mm | RUB 3,300 |
| *kerchief 80 rubles for 1 piece. | ||||
| Name | Price | ||
| WD ø60-1.0 m | 900 rub. | ||
| 3D ø76-1.0 m | 1,000 rub. | ||
| 3D ø108-1.0 m | RUB 1,300 | ||
| *M10 bolts | |||
We have modern equipment for welding work of any complexity. Guarantee provided.
Prices for pipe welding in 2020
Pipe welding is a job that requires certain knowledge and experience. Therefore, it costs good money, and a welder who knows how to weld pipes is worth his weight in gold.
The “ability” to weld pipes does not only mean applying a weld. First of all, these are the aesthetics of the connection and its tightness, the ability to assemble complex structures.
Below are the prices for pipe welding in 2020:
Pipe 15 mm (outer diameter 21.3) - welding in one pass, cost 26 rubles per 1 cm of welding seam. The total price per joint is 210 rubles.
Pipe 20 mm (outer diameter 26.8) - welding in one pass, cost 26 rubles per 1 cm of welding seam. The total price per joint is 265 rubles.
Pipe 25 mm (outer diameter 33.5) - welding in one pass, cost 26 rubles per 1 cm of welding seam. The total price per joint is 315 rubles.
Pipe 32 mm (outer diameter 42.3) - welding in one pass, cost 26 rubles per 1 cm of welding seam. The total price per joint is 380 rubles.
Pipe 40 mm (outer diameter 48) - welding in one pass, cost 23 rubles per 1 cm of welding seam. The total price per joint is 420 rubles.
Pipe 50 mm (outer diameter 57) - welding in one pass, cost 23 rubles per 1 cm of welding seam. The total price per joint is 440 rubles.
