GOST R 58602-2019 Perforated sheets. Specifications

GOST for perforated metal sheet

Perforated sheet is a modern finishing material widely used for technical and decorative purposes. On the working surface of the product, through cuts are applied in a certain sequence, which can have different shapes and sizes. Perforation of a metal sheet allows you to improve its performance characteristics and expand the scope of application.

The technical properties of perforated sheets directly depend on the material from which they are made. Several types of rolled metal are used for their production:

• cold-rolled (GOST 16523 97) and hot-rolled (GOST 19903 74) black steel;
• stainless steel (according to GOST 5582 75);
• galvanized steel GOST 14918 80);
• aluminum and alloys.

The perforated sheet is available in standard sizes, its thickness varies from 0.5 to 12 mm. The standards establish the dimensions of the sheets:

• small format (1000 x 2000 mm);
• medium shape (1250 x 2500 mm);
• large format (1500 x 3000 mm).

The type of perforation is determined by the shape of the holes. They can be square, round, oval. The holes can be arranged in straight rows, in a checkerboard pattern, with a recess. There are about 400 types of perforation.

Perforation is performed on specialized computer-controlled machines. This processing method allows you to reduce the weight of the product with minimal metal loss. Processing of perforated sheets includes cutting, cutting corners, bending, rolling, contact and arc welding, relief molding, punching fastening holes, and profile edging.

Perforated sheet GOST 16523 97 belongs to the category of thin-sheet cold-rolled products. Products are produced with a width of over 500 mm and a thickness of up to 3.9 mm. Cold-rolled black steel is considered a light, reliable and very durable material.

In order to improve the performance characteristics, products made from it are treated with powder paint, which improves the anti-corrosion properties. Cold-rolled sheets are supplied in oil, which helps prevent the formation of rust.

Galvanized sheet metal is characterized by increased resistance to corrosion processes. In its production, the continuous hot-dip galvanizing method is used. The service life of such products is longer than that of cold-rolled steel.

Rolled stainless steel is considered the most attractive and practical. Such punched sheets are used in furniture production and interior decoration. In accordance with GOST, they can have a matte, mirror, polished, colored or polished surface. Rolled stainless steel is produced without protective coatings, but is highly resistant to corrosion.

Advantages of perforated sheets

Perforated sheets have a number of advantages:

• light weight;
• ease of installation;
• durability;
• aesthetically attractive appearance.

Perforated sheet is a unique combination of lightness, strength and attractiveness. Thanks to these qualities, products of this type have found application in a variety of areas: construction, industrial production, and agriculture.

They are used in the decoration of premises, in the production of furniture, and for the installation of commercial equipment. Rolled sheets are used in the construction of barriers, partitions and ventilated suspended ceilings.

This is an excellent material for creating original lighting fixtures.

Standard perforation types

Learn more about perforation types

Price list

Steel 08PS 2000x1000 mm

Perforated metal sheet from the manufacturer

A perforated sheet is a thin, flat square or rectangular sheet of metal with holes of various shapes.

is a direct supplier of rolled metal products. We offer to buy perforated metal sheets wholesale from the manufacturer’s plant in Moscow. It is possible to manufacture to order according to individual measurements (large wholesale).

Prices for metal perforated sheet

For all questions regarding prices, please call 8 (495) 78-555-48 or via the feedback form.

Perforated metal sheet from the manufacturer

A perforated sheet is a thin, flat square or rectangular sheet of metal with holes of various shapes.

is a direct supplier of rolled metal products. We offer to buy perforated metal sheets wholesale from the manufacturer’s plant in Moscow. It is possible to manufacture to order according to individual measurements (large wholesale).

Prices for metal perforated sheet

For all questions regarding prices, please call 8 (495) 78-555-48 or via the feedback form.

Perforated sheet GOST 16523 97

Perforated sheet is a modern finishing material widely used for technical and decorative purposes. On the working surface of the product, through cuts are applied in a certain sequence, which can have different shapes and sizes. Perforation of a metal sheet allows you to improve its performance characteristics and expand the scope of application.

The technical properties of perforated sheets directly depend on the material from which they are made. Several types of rolled metal are used for their production:

• cold-rolled (GOST 16523 97) and hot-rolled (GOST 19903 74) black steel;
• stainless steel (according to GOST 5582 75);
• galvanized steel GOST 14918 80);
• aluminum and alloys.

The perforated sheet is available in standard sizes, its thickness varies from 0.5 to 12 mm. The standards establish the dimensions of the sheets:

• small format (1000 x 2000 mm);
• medium shape (1250 x 2500 mm);
• large format (1500 x 3000 mm).

The type of perforation is determined by the shape of the holes. They can be square, round, oval. The holes can be arranged in straight rows, in a checkerboard pattern, with a recess. There are about 400 types of perforation.

Perforation is performed on specialized computer-controlled machines. This processing method allows you to reduce the weight of the product with minimal metal loss. Processing of perforated sheets includes cutting, cutting corners, bending, rolling, contact and arc welding, relief molding, punching fastening holes, and profile edging.

Perforated sheet GOST 16523 97 belongs to the category of thin-sheet cold-rolled products. Products are produced with a width of over 500 mm and a thickness of up to 3.9 mm. Cold-rolled black steel is considered a light, reliable and very durable material.

In order to improve the performance characteristics, products made from it are treated with powder paint, which improves the anti-corrosion properties. Cold-rolled sheets are supplied in oil, which helps prevent the formation of rust.

Galvanized sheet metal is characterized by increased resistance to corrosion processes. In its production, the continuous hot-dip galvanizing method is used. The service life of such products is longer than that of cold-rolled steel.

Rolled stainless steel is considered the most attractive and practical. Such punched sheets are used in furniture production and interior decoration. In accordance with GOST, they can have a matte, mirror, polished, colored or polished surface. Rolled stainless steel is produced without protective coatings, but is highly resistant to corrosion.

Specifications

Official publication

Moscow Standardinform 2019

Preface

• 1 DEVELOPED by the Limited Liability Company "PerfoGrad" (LLC "Perfo* Grad")
• 2 INTRODUCED by the Technical Committee for Standardization TC 375 “Metal products from ferrous metals and alloys”
• 3 APPROVED AND ENTERED INTO EFFECT by Order of the Federal Agency for Technical Regulation and Metrology dated October 15, 2022 No. 1003-st
• 4 INTRODUCED FOR THE FIRST TIME

The rules for applying this standard are established in Article 26 of the Federal Law of June 29, 2015 No. 162-FZ “On Standardization in the Russian Federation”. Information about changes to this standard is published in the annual (as of January 1 of the current year) information index “National Standards”, and the official text of changes and amendments is published in the monthly information index “National Standards”. In case of revision (replacement) or cancellation of this standard, the corresponding notice will be published in the next issue of the monthly information index “National Standards”. Relevant information, notices and texts are also posted in the public information system - on the official website of the Federal Agency for Technical Regulation and Metrology on the Internet (www.gost.fu)

© Standardinform. decor. 2019

This standard cannot be fully or partially reproduced, replicated or distributed as an official publication without permission from the Federal Agency for Technical Regulation and Metrology

GOST R 58602—2019

NATIONAL STANDARD OF THE RUSSIAN FEDERATION

PERFORATED SHEETS

Specifications

Perforated sheets. Specifications

Date of introduction: 2020—08—01

1 area of ​​use

This standard applies to perforated sheets (hereinafter referred to as sheets) intended for use in various industries.

2 Normative references

8 of this standard uses normative references to the following standards:

GOST 5582 Rolled thin-sheet corrosion-resistant, heat-resistant and heat-resistant. Specifications

GOST 14918 Galvanized thin sheet steel with continuous lines. Specifications

GOST 15150 Machines, instruments and other technical products. Versions for different climatic regions. Categories, operating, storage and transportation conditions regarding the impact of environmental climatic factors

GOST 16523 Rolled thin-sheet carbon steel of high-quality and ordinary quality for general purposes. Specifications

GOST 19904 Cold rolled sheets. Assortment

GOST 21631 Sheets of aluminum and aluminum alloys. Specifications

GOST R 52246 Rolled hot-dip galvanized sheets. Specifications

Note - When using this standard, it is advisable to check the validity of the reference standards in the public information system - on the official website of the Federal Agency for Technical Regulation and Metrology on the Internet or using the annual information index "National Standards", which was published as of January 1 of the current year, and on issues of the monthly information index “National Standards” for the current year. If a reference standard to which an undated reference is given is replaced. then it is recommended to use the current version of this standard, taking into account all changes made to this version. If a dated reference standard is replaced, it is recommended to use the version of that standard with the year of approval (adoption) indicated above. If, after approval of this standard, the reference standard to which a dated reference is given. If a change is made affecting the provision referred to, it is recommended that this provision be applied without taking into account this change. If the reference standard is canceled without replacement, then the provision. 8 which provides a link to the negative, it is recommended to apply it in the part that does not affect this link.

3 Technical requirements

Sheets can be made from thin galvanized steel according to GOST 14918, hot-dip galvanized sheet metal according to GOST R 52246 (assortment according to GOST 19904), cold-rolled sheet steel according to GOST 16523, aluminum sheets according to GOST 21631. corrosion-resistant, heat-resistant and heat-resistant sheets according to GOST 5582 or other materials as agreed with the consumer.

Sheets must be rectangular in shape.

Official publication

Permissible deviations in overall dimensions - in accordance with the requirements of regulatory documents for the materials used for the manufacture of sheets or as agreed with the consumer.

Types of sheets are shown in Figures 1-5.

i

09

t

f'ff'fff

-TO

FF ff ff ffff f FFFF ff f ffffffffffffff

ff'f'f'f-'f'f-f'f'f'f'f'f'f'ff

Figure 1 - Sheet type 1 a (with round holes, the centers of which are located at the vertices of a regular hexagon)

Figure 3 - Sheet type 2a (with rectangular holes arranged in rows)

whose centers are located at the vertices of the square)

Figure 4 - Sheet type 3 (with triangular holes)

J.W.

• •• • ••

• •• • ••

• •• • ••

K NN NN NN VDV g ESffl£HHl KNNNYSHSHETV E®ffl£HHlU„^ «N N N ZSHSHSHSHV ESffi n n ffffffffffdtrffffffGrff

Figure 5 - Type 4 sheet (with square holes)

By agreement with the consumer, it is possible to produce sheets with other types of holes.

The dimensions and spacing of the sheet holes are indicated in Tables 1–5.

Table 1 - Dimensions and hole spacing of type 1a sheets

Table 2 - Dimensions and hole spacing of type 1 sheets in

In millimeters

Table 3 - Dimensions and hole spacing of type 2a sheets

Table 4 - Dimensions and hole spacing of type 3 sheets

In millimeters

End of table 4

In millimeters

Table 5 - Dimensions and hole spacing of type 4 sheets

In millimeters

The dimensions of non-perforated fields m and m0 should be in the range of 5–50 mm.

By agreement with the consumer, it is allowed to produce sheets:

•without fields, free from holes;

• • with fields of other sizes:

•with asymmetric fields.

Sheets must be flat. Deviation from flatness should not exceed 20 mm over a length of 1000 mm.

The placement of holes should be uniform, without disturbing the straightness of the rows and without gaps.

In sheets with holes measuring up to 3.0 mm inclusive - in the first three and three last types, and in sheets with holes measuring over 3.0 to 11.0 mm in the first two and last two types, the number of holes can be halved and absence of one type of hole.

In sheets with holes up to 2.5 mm in size inclusive, the presence of unpunched rows of holes, not located in adjacent types along the entire length of the sheet, is allowed in an amount of no more than 1% of the total number of types of holes.

4 Marking

• 4.1 Sheets should be marked on a label attached to a package of sheets of the same type.
• 4.2 The marking must contain:

— name of the sheet;

• • trademark or name of the manufacturer.

5 Packaging

• 5.1 Sheets must be formed into transport bags using disposable or reusable packaging media.
• 5.2 A label is attached to each transport package, on which, in addition to the markings in section 4, the following must be indicated:

• • number of sheets:
• • packing date:
• • gross weight.

• 5.3 Each batch of sheets should be accompanied by a document containing:

• — name or trademark of the manufacturer;
• — designation of sheet type;

• • date of shipment;

• — number of sheets in the batch;

• * designation of this standard.

6 Safety requirements

• 6.1 When producing sheets, the manufacturer must implement the entire range of safety measures specified in the design documentation, and it must be possible to control the implementation of all technological operations on which safety depends.
• 6.2 Sheets should be made as follows. so that raw materials and substances used in their production and operation do not threaten the safety of human life or health.
• 6.3 The sheets should not have cracks, delaminations, or deformed bridges between the holes.
• 6.4 Burrs larger than 0.2 mm are not allowed along the contour of the holes.

7 Transportation and storage

• 7.1 Transportation of sheets is carried out by any type of transport in accordance with the transportation rules in force for this type of transport.

It is not allowed to transport sheets in vehicles contaminated with chemically active substances that can destroy the zinc coating and cause corrosion of the base metal.

• 7.2 Sheets must be stored in conditions not lower than conditions 2 according to GOST 15150, excluding storage with chemically active substances.
• 7.3 Sheets must be stacked on pallets. The stack height should not exceed 1.6 m.

8 Operating instructions

Preparation of sheets for work, transportation, storage and operation are carried out in accordance with the requirements of the operating manual.

Perforated sheet GOST 19903-74

Products and servicesCompanies

By ratingBy price (cheaper first)By price (higher first)

Products and servicesCompanies

By ratingBy price (cheaper first)By price (higher first)

Page 3

Products and servicesCompanies

By ratingBy price (cheaper first)By price (higher first)

Page 4

Products and servicesCompanies

By ratingBy price (cheaper first)By price (higher first)

Page 5

Products and servicesCompanies

By ratingBy price (cheaper first)By price (higher first)

Page 6

Products and servicesCompanies

By ratingBy price (cheaper first)By price (higher first)

1. Perforated sheet 2 mm according to GOST 19903-74, 5582-75, 3kp, 45, 09G2S
   width 1000 mm, 1100 mm, 1250 mm, 1400 mm, 1420 mm, 1500 mm, 600 mm, 650 mm, 670 mm, 700 mm, 710 mm, 750 mm, 800 mm, 850 mm, 900 mm, 950 mm, 500 mm, 550 mm, 1200 mm, 1450 mm, 1600 mm, 1700 mm, 1800 mm, 1900 mm, 2000 mm, 2100 mm, 2200 mm , 2300 mm, hot
2. Perforated sheet 1.7 12Х17, 10Х17Н13М2Т, 08Х18Н10Т
   according to GOST 5582-75, 16523-97, 14918-80, cold-rolled, width 500 mm, 550 mm, 600 mm, 650 mm, 700 mm, 750 mm, 800 mm, 850 mm, 900 mm, 950 mm, 1000 mm, 1100 mm, 1200 mm, 1250 mm, 1400 mm, 1450 mm, 1500 mm, 1600 mm, 1700 mm, 1800 mm, 1900 mm, 2000 mm, 2100
3. Perforated sheet GOST 5582-75 from 1 080
   before
   16 043.30
   RUR/piece Wholesale price:
   from 1,069
   rub./pc. from 10 pcs.

   Hole sizes from 1 to 10.45 mm. Pitch from 2 to 78 mm. Perforation type Rv, Qg. Services: cutting, delivery.

4. Perforated sheet GOST 5582-75 from 1 080
   before
   16 043.30
   RUR/piece Wholesale price:
   from 1,069
   rub./pc. from 10 pcs.

   Hole sizes from 1 to 10.45 mm. Pitch from 2 to 78 mm. Perforation type Rv, Qg. Services: cutting, delivery.

5. Perforated sheet 2 mm according to GOST 19903-74, 5582-75, 3kp, 45, 09G2S
   width 1000 mm, 1100 mm, 1250 mm, 1400 mm, 1420 mm, 1500 mm, 600 mm, 650 mm, 670 mm, 700 mm, 710 mm, 750 mm, 800 mm, 850 mm, 900 mm, 950 mm, 500 mm, 550 mm, 1200 mm, 1450 mm, 1600 mm, 1700 mm, 1800 mm, 1900 mm, 2000 mm, 2100 mm, 2200 mm , 2300 mm, hot
6. Perforated stainless steel sheet 08X18N10 (EI119) 0.4x1000x2000 mm GOST 558
   BVB-Alliance LLC offers you to purchase rolled metal of any steel grades and standard sizes - long rolled products, non-ferrous rolled products, rolled pipes, rare metals and alloys, special steels. We offer metalworking services. Check with the manager for current prices.
7. Perforated sheet 2.8 mm in accordance with GOST 19903-74, 5582-75, 3kp, 45, 09G2S
   width 1000 mm, 1100 mm, 1250 mm, 1400 mm, 1420 mm, 1500 mm, 600 mm, 650 mm, 670 mm, 700 mm, 710 mm, 750 mm, 800 mm, 850 mm, 900 mm, 950 mm, 500 mm, 550 mm, 1200 mm, 1450 mm, 1600 mm, 1700 mm, 1800 mm, 1900 mm, 2000 mm, 2100 mm, 2200 mm , 2300 mm, 2350 mm
8. Perforated sheet 0.75 mm according to GOST 19903-74, 5582-75, 3kp, 45, 09G2S
   width 1000 mm, 1200 mm, 1250 mm, 500 mm, 510 mm, 600 mm, 650 mm, 670 mm, 700 mm, 710 mm, 750 mm, 550 mm, 800 mm, 850 mm, 900 mm, 950 mm, 1100 mm, 1400 mm, 1450 mm, 1500 mm, hot rolled, cold rolled
9. Perforated sheet 1.7 mm according to GOST 5582-75, 16523-97, 14918-80, 08ps, 45
   width 500 mm, 550 mm, 600 mm, 650 mm, 700 mm, 750 mm, 800 mm, 850 mm, 900 mm, 950 mm, 1000 mm, 1100 mm, 1200 mm, 1250 mm, 1400 mm, 1450 mm, 1500 mm, 1600 mm, 1700 mm, 1800 mm, 1900 mm, 2000 mm, 2100 mm, 2200 mm, 2300 mm, cold rolled
10. Perforated sheet 3 mm according to GOST 19903-74, 5582-75, 3kp, 45, 09G2S
    width 1000 mm, 1100 mm, 1250 mm, 1400 mm, 1420 mm, 1500 mm, 1600 mm, 1700 mm, 1800 mm, 600 mm, 650 mm, 670 mm, 700 mm, 710 mm, 750 mm, 800 mm, 850 mm, 900 mm, 950 mm, 500 mm, 550 mm, 1200 mm, 1450 mm, 1900 mm, 2000 mm, 2100 mm, 2200 mm , 2300 mm, 2350 mm
11. Perforated sheet 1.1 mm according to GOST 5582-75, 16523-97, 14918-80, 08ps, 45
    width 500 mm, 550 mm, 600 mm, 650 mm, 700 mm, 750 mm, 800 mm, 850 mm, 900 mm, 950 mm, 1000 mm, 1100 mm, 1200 mm, 1250 mm, 1400 mm, 1450 mm, 1500 mm, 1600 mm, 1700 mm, 1800 mm, cold rolled
12. Perforated sheet 0.9 mm according to GOST 19903-74, 5582-75, 3kp, 45, 09G2S
    width 1000 mm, 1250 mm, 500 mm, 510 mm, 600 mm, 650 mm, 670 mm, 700 mm, 710 mm, 750 mm, 800 mm, 550 mm, 850 mm, 900 mm, 950 mm, 1100 mm, 1200 mm, 1400 mm, 1450 mm, 1500 mm, 1600 mm, 1700 mm, hot rolled, cold rolled
13. Perforated sheet 3.2 mm according to GOST 19903-74, 5582-75, 3kp, 45, 09G2S
    width 1000 mm, 1100 mm, 1250 mm, 1400 mm, 1420 mm, 1500 mm, 1600 mm, 1700 mm, 1800 mm, 600 mm, 650 mm, 670 mm, 700 mm, 710 mm, 750 mm, 800 mm, 850 mm, 900 mm, 950 mm, 500 mm, 550 mm, 1200 mm, 1450 mm, 1900 mm, 2000 mm, 2100 mm, 2200 mm , 2300 mm, 2350 mm
14. Perforated sheet 1.8 mm according to GOST 19903-74, 5582-75, 3kp, 45, 09G2S
    width 1000 mm, 1100 mm, 1250 mm, 1400 mm, 1420 mm, 1500 mm, 600 mm, 650 mm, 670 mm, 700 mm, 710 mm, 750 mm, 800 mm, 850 mm, 900 mm, 950 mm, 500 mm, 550 mm, 1200 mm, 1450 mm, 1600 mm, 1700 mm, 1800 mm, 1900 mm, 2000 mm, 2100 mm, 2200 mm , 2300 mm, hot
15. Perforated sheet 1 mm according to GOST 19903-74, 5582-75, 3kp, 45, 09G2S
    width 1000 mm, 1250 mm, 600 mm, 650 mm, 670 mm, 700 mm, 710 mm, 750 mm, 800 mm, 850 mm, 900 mm, 950 mm, 500 mm, 550 mm, 1100 mm, 1200 mm, 1400 mm, 1450 mm, 1500 mm, 1600 mm, 1700 mm, hot rolled, cold rolled
16. Perforated sheet 3.9 mm according to GOST 19903-74, 5582-75, 3kp, 45, 09G2S
    width 1000 mm, 1100 mm, 1250 mm, 1400 mm, 1420 mm, 1500 mm, 1600 mm, 1700 mm, 1800 mm, 600 mm, 650mm, 670mm, 700mm, 710mm, 750mm, 800mm, 850mm, 900mm, 950mm, 1450mm, 1900mm, 2000mm, 2100mm, 2200mm, 2300mm, 2350mm, hot rolled, chilly
17. Sheet with perforation according to GOST 5582-75 1 189
    before
    16 256
    RUR/piece

    hole diameter 1 - 10.45 mm. step 2 - 78 mm. thickness 1 - 3 mm. sheet size 1000/2000, 1250/2500 mm.

18. Perforated sheet 0.9 mm according to GOST 19903-74, 5582-75, 3kp, 45, 09G2S
    width 1000 mm, 1250 mm, 500 mm, 510 mm, 600 mm, 650 mm, 670 mm, 700 mm, 710 mm, 750 mm, 800 mm, 550 mm, 850 mm, 900 mm, 950 mm, 1100 mm, 1200 mm, 1400 mm, 1450 mm, 1500 mm, 1600 mm, 1700 mm, hot rolled, cold rolled
19. Perforated sheet 2.8 mm in accordance with GOST 19903-74, 5582-75, 3kp, 45, 09G2S
    width 1000 mm, 1100 mm, 1250 mm, 1400 mm, 1420 mm, 1500 mm, 600 mm, 650 mm, 670 mm, 700 mm, 710 mm, 750 mm, 800 mm, 850 mm, 900 mm, 950 mm, 500 mm, 550 mm, 1200 mm, 1450 mm, 1600 mm, 1700 mm, 1800 mm, 1900 mm, 2000 mm, 2100 mm, 2200 mm , 2300 mm, 2350 mm
20. Perforated sheet 1.3 mm according to GOST 19903-74, 5582-75, 3kp, 45, 09G2S
    width 1000 mm, 1100 mm, 1250 mm, 600 mm, 650 mm, 670 mm, 700 mm, 710 mm, 750 mm, 800 mm, 850 mm, 900 mm, 950 mm, 500 mm, 550 mm, 1200 mm, 1400 mm, 1450 mm, 1500 mm, 1600 mm, 1700 mm, 1800 mm, hot rolled, cold rolled
21. Perforated sheet 1.5 mm according to GOST 19903-74, 5582-75, 3kp, 45, 09G2S
    width 1000 mm, 1100 mm, 1250 mm, 1400 mm, 1420 mm, 1500 mm, 600 mm, 650 mm, 670 mm, 700 mm, 710 mm, 750 mm, 800 mm, 850 mm, 900 mm, 950 mm, 500 mm, 550 mm, 1200 mm, 1450 mm, 1600 mm, 1700 mm, 1800 mm, 1900 mm, 2000 mm, 2100 mm, 2200 mm , 2300 mm, hot
22. Perforated sheet 3.9 mm according to GOST 19903-74, 5582-75, 3kp, 45, 09G2S
    width 1000 mm, 1100 mm, 1250 mm, 1400 mm, 1420 mm, 1500 mm, 1600 mm, 1700 mm, 1800 mm, 600 mm, 650mm, 670mm, 700mm, 710mm, 750mm, 800mm, 850mm, 900mm, 950mm, 1450mm, 1900mm, 2000mm, 2100mm, 2200mm, 2300mm, 2350mm, hot rolled, chilly
23. Sheet with perforation according to GOST 5582-75 1 189
    before
    16 256
    RUR/piece

    hole diameter 1 - 10.45 mm. step 2 - 78 mm. thickness 1 - 3 mm. sheet size 1000/2000, 1250/2500 mm.

24. Perforated sheet 0.9 mm according to GOST 19903-74, 5582-75, 3kp, 45, 09G2S
    width 1000 mm, 1250 mm, 500 mm, 510 mm, 600 mm, 650 mm, 670 mm, 700 mm, 710 mm, 750 mm, 800 mm, 550 mm, 850 mm, 900 mm, 950 mm, 1100 mm, 1200 mm, 1400 mm, 1450 mm, 1500 mm, 1600 mm, 1700 mm, hot rolled, cold rolled
25. Perforated sheet 2.8 3kp, 3ps, 3sp, 08ps, 20, 09G2S, 12Х17
    according to GOST 19903-74, 5582-75, 16523-97, 14918-80, hot-rolled, cold-rolled, width 1000 mm, 1100 mm, 1250 mm, 1400 mm , 1420 mm, 1500 mm, 600 mm, 650 mm, 670 mm, 700 mm, 710 mm, 750 mm, 800 mm, 850 mm, 900 mm, 950 mm, 500 mm, 550 mm, 1200 mm, 1450 mm,
26. Perforated sheet 1 mm according to GOST 19903-74, 5582-75, 3kp, 45, 09G2S
    width 1000 mm, 1250 mm, 600 mm, 650 mm, 670 mm, 700 mm, 710 mm, 750 mm, 800 mm, 850 mm, 900 mm, 950 mm, 500 mm, 550 mm, 1100 mm, 1200 mm, 1400 mm, 1450 mm, 1500 mm, 1600 mm, 1700 mm, hot rolled, cold rolled
27. Perforated sheet 3.5 mm according to GOST 19903-74, 5582-75, 3kp, 45, 09G2S
    width 1000 mm, 1100 mm, 1250 mm, 1400 mm, 1420 mm, 1500 mm, 1600 mm, 1700 mm, 1800 mm, 600 mm, 650mm, 670mm, 700mm, 710mm, 750mm, 800mm, 850mm, 900mm, 950mm, 1450mm, 1900mm, 2000mm, 2100mm, 2200mm, 2300mm, 2350mm, hot rolled, chilly
28. Perforated sheet 2.5 mm in accordance with GOST 19903-74, 5582-75, 3kp, 45, 09G2S
    width 1000 mm, 1100 mm, 1250 mm, 1400 mm, 1420 mm, 1500 mm, 600 mm, 650 mm, 670 mm, 700 mm, 710 mm, 750 mm, 800 mm, 850 mm, 900 mm, 950 mm, 500 mm, 550 mm, 1200 mm, 1450 mm, 1600 mm, 1700 mm, 1800 mm, 1900 mm, 2000 mm, 2100 mm, 2200 mm , 2300 mm, 2350 mm
29. Perforated stainless steel sheet 08X18N10 (EI119) 1x1000x2000 mm GOST 5582 -
    BVB-Alliance LLC offers you to purchase rolled metal of any steel grades and standard sizes - long rolled products, non-ferrous rolled products, rolled pipes, rare metals and alloys, special steels. We offer metalworking services. Check with the manager for current prices.
30. Perforated stainless steel sheet 08X18N10 (EI119) 1x1000x2000 mm GOST 5582 -
    BVB-Alliance LLC offers you to purchase rolled metal of any steel grades and standard sizes - long rolled products, non-ferrous rolled products, rolled pipes, rare metals and alloys, special steels. We offer metalworking services. Check with the manager for current prices.

Page 7

Products and servicesCompanies

By ratingBy price (cheaper first)By price (higher first)

Page 8

Products and servicesCompanies

By ratingBy price (cheaper first)By price (higher first)

Page 9

Products and servicesCompanies

By ratingBy price (cheaper first)By price (higher first)

Page 10

Products and servicesCompanies

By ratingBy price (cheaper first)By price (higher first)

Page 11

Products and servicesCompanies

By ratingBy price (cheaper first)By price (higher first)

Pages: previousnext

Page 12

Products and servicesCompanies

By ratingBy price (cheaper first)By price (higher first)

Page 13

Products and servicesCompanies

By ratingBy price (cheaper first)By price (higher first)

Page 14

Products and servicesCompanies

By ratingBy price (cheaper first)By price (higher first)