How to use cold welding Poxipol

• Types and scope of application
• Cold welding Poxipol: characteristics
• Advantages and disadvantages of the product
• How to use Poxipol: instructions for use
• Where to buy cold welding?

There are often moments when a part breaks down in the complex body of a car, without which further movement is impossible. To get to the nearest auto repair shop, the driver begins to rack his brains to solve the problem that has arisen. In such situations, Poxipol cold welding is always useful, thanks to which you can quickly restore the vehicle’s functionality and drive to a service station to provide full technical assistance. What is Poxipol glue, what is the price and instructions for use? Let's try to answer these exciting questions.

Bonding technology

To work with glue, you do not need professional construction education or extensive experience. There is nothing complicated in carrying out installation operations. Using the mixture, you can glue brick, concrete, metal, fiber cement, granite, marble, ceramics, glass, porcelain-faience, wood and some types of polymers other than those indicated on the package. Instructions for using Poxipol are as follows:

• 1. The surface to be treated is cleaned of foreign objects and treated with antifungal liquid. No primer required.
• 2. Dilute the required amount of glue, and also prepare all the tools that may be needed during the work process.
• 3. Apply glue only to the surface of the element to be attached and press it firmly in the right place. Hold for 1-2 minutes is enough.
• 4. On average, hardening lasts 10-12 hours, but experts recommend not touching the treated area for at least one day so that the glue is fully fixed.
• 5. After complete hardening, any manipulations can be performed with the element, such as painting, drilling, grinding, or figured cutting. According to its properties, the adhesive joint will be stronger than brick, concrete and any cement mortar.

The technological operation is very simple, but do not forget about safety measures

It is very important to use protective gloves when working, since if the glue gets on your skin, it will no longer be possible to wipe it off. If you use it to glue two fingers together, then only surgical intervention will help to separate them painlessly

So the situation is very serious and safety requirements should not be neglected.

Use temperature and other application features

"Poxipol" is excellent for metal. The composition has the characteristics of rapid hardening. The temperature of use can vary from 20 to 24 °C. After a 10-minute break, the composition will change color to transparent and harden without changing its own volume. The treated area will reach maximum strength within 24 hours, which is true if the room temperature varies from 21 to 25 °C.

By means of the polarity relationship, the thermal input in the component can be adjusted very precisely. In this way, the heat input can be controlled perfectly. You maintain the original properties of the material due to the minimization of heat input. You reduce component distortion and avoid extensive reorganizations.

You compensate for material tolerances due to good gap bridging ability. Do you want to reduce the cost of producing thin wafers while increasing quality? Thus, even in poor conditions, these paths can be laid safely.

Poxipol glue, the instructions for use of which should help you avoid mistakes, has insulating properties. However, this is true if you mix the ingredients until smooth. Additional positive features include excellent sag resistance. Tensile strength is 8 MPa. The glue has varying degrees of resistance to chemicals. For example, the composition perfectly withstands the effects of water and the external environment. The mixture will cope somewhat worse with hydrochloric and sulfuric acids, mineral oil, as well as gasoline and toluene.

In the case of self-adhesive bitumen coating, the undercoat is equipped in such a way that it is laid on a suitable substrate after the release film has been removed. The use of cold seam adhesives is mainly carried out using. Temperature-sensitive substructures and parts. . In system design, self-adhesive strips can be used as a vapor barrier, sealing layer or top layer.

Area of ​​application of Poxipol

The table is segmented from single, flat sonotrode blocks. Any welding shape and lines can be created on the entire welding surface. The sonotrode table is installed in the machine and can be used universally across the entire range of formats thanks to simple modifications to the welding tool. Various product contours are imaged through welding tools rather than through sonotrodes.

Features and scope of application of glue

Poxipol Uruguayan glue is a two-component adhesive composition based on epoxy resin, a universal means for bonding a wide variety of materials. Cold welding, which is Poxipol glue, gives results similar to conventional welding: after drying, a strong adhesive seam is formed, literally soldering the surfaces together.

A unique feature is the ability to subject the seam to various types of processing - threading, drilling, grinding, which will not violate the technical characteristics of the glue. To create a reliable joint, you do not need to subject the products to strong pressing or compression. It is enough to ensure a state of rest and absence of vibration, and the parts will be firmly fixed. Before use, both components of the glue are mixed with each other, and only then the composition will be ready for use.

The areas of use of Poxipol glue are varied. It can be used for restoration, repair, gluing, sealing, and fixing products. The most popular use of glue among car enthusiasts is sealing leaks in a gas tank. Also in the garage it can be used for:

• repair of aluminum radiators of cars, motorcycles;
• restoration of the boat hull;
• body repair;
• strengthening the seams of an old vehicle.

Poxipol cold welding is suitable for materials such as steel, aluminum, alloys, wood, concrete, glass and ceramics, plastic. “Poxipol” perfectly glues rubber products and PVC without having a corrosive effect. It is not recommended to use glue only on Teflon, polypropylene, polyethylene, but all other materials can be held together by this cold welding.

Common cases of using Poxipol in everyday life:

• repair of handles of kitchen knives and other cutlery;
• restoration of household appliances;
• installation of hinges on furniture, additional fixation of cabinets, fastenings;
• placing the sink on the countertop;
• restoration of marble countertops, furniture made of metal and wood, plastic;
• repair of slats, crossbars, table and chair legs;
• repair of windows and doors made of wood and metal;
• fastening hooks, dowels;
• restoration of water tanks at home and in the country;
• sealing sinks, bathtubs, mirror frames, sealing cracks;
• sealing various areas in the bathroom, shower;
• repair of garden furniture, sculptures, monuments;
• restoration of carvings on various objects;
• fixing stone blocks, additional fastening of tiles;
• gluing drain pipes, drain channels;
• attaching cuttings of garden tools.

Peculiarities

Poxipol cold welding is produced by Uruguayan. This is a two-component adhesive based on epoxy resin. It can glue any materials from plastic to metal.

The result is similar to conventional welding, but there is no need to heat the surfaces: when the glue dries, a strong seam is formed that solders the surfaces. After hardening, the seam can be processed using various methods: threading, drilling, grinding. The properties of the product are not affected after treatment. The joint formed with glue will be reliable and durable even without additional pressing or squeezing. To form a seam, it is enough to ensure that the processed parts are still and free of vibration. In order for Poxipol to be ready for use, both of its components must be mixed.

Adviсe

Strict adherence to the rules of use and following simple recommendations will help you quickly and reliably glue any surfaces and extend the service life of damaged objects.

• Leveling the mixture after application should be done using a rubber spatula or a knife moistened with water.
• If the mass is difficult to squeeze out, you can slightly heat the tube.
• If the material is partially used and there is a residual amount of glue for the next use, it is not recommended to swap the tube caps.
• The mixture should be prepared on an easy to clean plate.

• It should be remembered that Poxipol does not glue surfaces made of Teflon, polypropylene and polyethylene.
• To join complex surfaces, each part must first be coated with a thin layer of toluene-free contact adhesive. This applies to steel, bronze, copper and chrome plated products. Work with cold welding can begin after the auxiliary composition has completely dried.
• When gluing smooth, non-porous elements, it is recommended to clean the working areas with sandpaper or fine sandpaper. This will increase the adhesive properties of the materials and ensure their reliable connection.
• It should be borne in mind that the composition becomes transparent only 10 minutes after application. The volume and shape of the layer does not change.
• The recommended temperature for cold welding is 20–25 degrees. A higher temperature reduces the time of complete drying, a lower temperature increases it.

Poxipol cold welding will help you quickly repair any product, maintain its presentable appearance and ensure high reliability of the connection.

You will learn more about working with Poxipol cold welding by watching the following video.

Useful tips and safety precautions

When the glue dries, you can drill, sand, saw. To achieve improved joint quality when working with materials such as stainless steel, brass or other perfectly smooth surfaces, be sure to sand. After this, degrease, then apply the finished mixture.

It is not flammable, but will not withstand open fire. Not suitable for working with polyethylene, teflon, polypropylene. You cannot repair a gas pipeline at home. You can paint it to get the desired color. At the same time there will be protection from ultraviolet radiation.

If not used carefully, it can be removed from hands with any abrasive material. Then rinse well with warm water and regular soap. Because epoxy resin is very sticky. Do not swallow. Keep out of the reach of children and pets.

Approximate analogues

Analogues of poxypol glue are everything called “cold welding” and partially “liquid nails”. These are present in the brands “Bison”, “Zubr”, “Moment”, “Almaz”, ABRO. Moment Epoxylin 2 in 1, “Super Grip”, “Epoxy Exclusive”, “Epoxy Metal”, “Done Deal DD6580” and many others. There are a lot of options, fortunately the adhesive market is saturated. There are plenty to choose from.

Glue consistency and its differences

Based on their structure, two types of epoxy adhesive can be distinguished:

• Liquid glue is a gel squeezed out of a tube. Very simple and easy to use. You just need to squeeze the gel out of the tube and apply it to the surfaces to be glued. During operation, time is saved on mixing and preparing the solution.
• Plastic mass - the consistency resembles dough or plasticine, sold in tubes. The required part of the plastic is cut off from the general piece and moistened with water. Afterwards, you need to knead the product with your hands for a few seconds and apply it to the parts to be glued.

There are also modified epoxy adhesive compositions; their hardening temperature ranges from +60 to +120 degrees Celsius. This material is used for gluing metals and non-metals that are resistant to oils, fuels and other organic solvents.

Hot hardening products are considered especially durable, with temperatures ranging from +140 to +300 degrees. Such compositions are heat resistant and have high electrical insulating characteristics.

In addition to epoxy compounds used in production and industry, there are a number of universal epoxy compounds used in everyday life:

• "Moment" is one of the most recognizable modern brands. Sold in any hardware store at a very affordable price. The packaging of the product is convenient for any craftsman: tubes with epoxy gel, plastic masses of 50 grams or reusable large-volume packaging. The shelf life of such a product after opening the package is only a few months in a dry place with a temperature of no more than +25.
• “Contact” is ideal for gluing products that will subsequently be exposed to moisture. Used for sealing joints in plumbing, pipe joints, gluing light shelves and decorative elements in the bathroom. The glue hardens in 2-3 minutes.
• “Cold welding” - suitable for joining metal elements, copes with the task in a few seconds. The level of surface mating is identical to the effect after classical welding. After hardening, the edges of the metal product remain smooth, which is an additional advantage.
• Universal EDP adhesive - used for attaching various surfaces, from glass and porcelain to metal. Experts say that this particular composition is optimal in quality and composition.

Top best

The stores have a large selection of epoxy compounds from imported and domestic manufacturers:

• Contact – transparent epoxy glue. Contains: poly epoxy resin, hardener. For use in household repairs. The seam is resistant to aggressive environments (exposure to oil, gasoline, water), does not shrink in any way, and does not expand. Perfectly fills vacuums and cracks. After drying, the product can be used at temperatures from –30 degrees to + 150 degrees. Glass, metal, wood, porcelain can be bonded.
• Moment Super Epoxy is an epoxy adhesive with many functions. It has a colorless structure, has superpowers, glues almost all materials, does not spread out and does not shrink when drying. Suitable for outdoor use. After drying, you can paint over, drill, etc. When the parts are mixed, curing begins within five minutes and high reliability is achieved within an hour. Do not use with polyethylene, Teflon, polypropylene or surfaces that will come into contact with food.
• TechnoNIKOL is a thixotropic epoxy adhesive with two components. The seam is resistant to bending and compression. Provides high adhesion to smooth surfaces. Used for repairing concrete structures, columns, curbs. Fills voids, gaps, cracks. Connects load-bearing and repaired concrete elements. Available in metal and plastic containers.
• G/Flex is an epoxy resin designed for permanent and water-resistant bonding of fiberglass, ceramics, and wood. It has higher elasticity than conventional epoxy or polyester resin, but is thicker and tougher than sealants. Used for connections that will absorb stress, increase, contraction, ripple, shock. After connecting the elements, working time is 45 minutes at room temperature. Hardening occurs after 7 hours, after 24 hours the glued elements can be used.
• Poxypol - two components. Consists of oligomers. The package contains two tubes. Before use, the contents are mixed in equal proportions. When mixed until smooth, a white adhesive composition is obtained. Bonds ceramics, metal, wood, concrete, plastic, glass, rubber. Hardens when exposed to water or oils. You can correct the seam within the first 10 minutes after application. Complete hardening occurs within a day.

How long does it take for glue to dry?

There are 3 stages of modification of the structure of the mixture after application:

• 2 minutes after surface treatment - this time is allotted for adjusting the position without the risk of losing the properties of the glue;
• 10 minutes - at the end of this period of time, the glue sets, so if damaged, the seam loses its properties and strength decreases;
• 24 hours after treatment are given for complete drying.

If it is planned to carry out processing or install fasteners in the area where the glue is applied, it is recommended to wait a little longer than 1 day. This will provide higher strength. Moreover, the possibility of expansion of the suture joint, its compression and deformation is eliminated.

Instructions for using glue

To securely fix the parts, it is important to prepare both surfaces to be glued well. First, remove dirt, debris, and wipe off dust.

Next, degreasing is carried out by washing with soapy water, wiping with acetone, alcohol, or special degreasers (depending on the type of material). Before applying glue, you need to make sure that the surface is completely dry - this way the adhesion will be much higher.

Method of preparing glue

The two components of Poxipol glue must be mixed strictly before work, otherwise the composition will quickly harden and deteriorate. The following actions must be taken:

• place the required amount of component A (epoxy resin) on a plate or in a disposable cup;
• add the same volume of composition B (hardener), that is, the proportion will be 1:1;
• Mix the glue well so that it becomes homogeneous; you should not spend a lot of time on the process.

At the end of the work, the tray plate must be cleaned by scraping off any remaining glue; it is reusable and will be useful for the next use of Poxipol.

Bonding products with Poxypol

After the glue reaches a homogeneous consistency without lumps, you can begin to fasten the parts. One of the working surfaces is well coated with glue, then pressed firmly against the second part. Allow 60-120 seconds for initial setting; if necessary, adjust the position of the parts during the first 5-10 minutes. The product is left for a day, after which it can be used.

Useful tips for using Poxipol are as follows:

• to seal joints, holes, cracks, and other defects, it is better to use a small construction spatula or knife dipped in cold water, which is used to level the glue;
• when repairing leaks in containers and reservoirs, the composition is also applied with a spatula, but already slightly thickened, or an opaque plasticine-like glue is taken by hand and glued to the problem area;
• if small steel shavings are introduced into the glue, the mass will become more resistant to mechanical loads and can even withstand vibration of products;
• the most favorable temperature for working with glue is +18…+22 degrees, in which case the composition hardens evenly;
• It is often necessary to apply two layers of glue; in this situation, you need to wait until the first one is completely dry and only then apply the second one.

There is no need to throw away the remaining glue in the tubes; they can still be used in the future

It is only important not to swap the caps, screwing them in the correct order. If the epoxy resin in the package has thickened a little, before use you need to put the tube in hot water or on a heating radiator, closed.

Precautions when working with glue

Epoxy can negatively affect the skin and mucous membranes, causing irritation and allergic reactions. The hardener is even more harmful to the skin; direct contact with the body should not be allowed. If any component or mixture comes into contact with the skin, wash it with plenty of soap and water. Penetration into the eyes or ingestion requires immediate medical attention!

After drying, the composition is harmless to humans, but when working with it, safety precautions must be observed: wear goggles, gloves, a respirator, and ventilate the room well. It is better not to use expired glue. It should only be stored out of the reach of children and animals. It is strictly forbidden to repair elements of gas equipment with Poxipol!

Cold welding Poxipol provides exceptional quality of gluing of different products. It will become an indispensable tool at home, in the workshop, for repair work. The effectiveness of the glue has been proven in practice, and it does not lose popularity among users.

Types of adhesive composition

Regarding the variety, it should be noted that poxypol is supplied to the market in different volumes, about 14-70 ml. This applies to the volume of the pipes, where the colors of the packaging, as well as the color of the pipe itself, directly indicate the variety.

For example, there is poxipol on sale in a transparent color, which can be seen on store shelves in red packaging. As for the regular variety, it is presented in blue packaging. This should be taken into account when processing any visible parts, where it is important to achieve not only strength, but also aesthetic compliance.

It is important to take into account that only transparent polyoxypol has a dielectric structure. That is, it does not allow electric current to pass through itself and also prevents the penetration of electrical impulses.

Scope of application of the polymer composition

When choosing the type of cold welding, be sure to take into account the nature of the material to be processed. The scope of cold welding is very wide. If we consider car maintenance and repair, the following areas stand out:

• connection of various metal surfaces;
• sealing leaking pipes and gas tanks;
• sealing cracks in plastic tanks;
• repair of parts and pipes of the exhaust gas exhaust system;
• production of plugs for thread cutting.

Cold welding for plastic

For the processing of plastic surfaces, less stringent requirements are put forward compared to metal surfaces. Therefore, two-component adhesive Poxipol meets milder requirements. For comparison, the maximum operating temperature is 93°C, and the joint strength is 2.4 MPa.

The choice of composition for plastic should be correlated with the operating conditions of the material. For example, for vibration-loaded materials, a composition with increased tensile and shear pressure is selected.

WATCH THE VIDEO

Cooking method

Watch the video:

Like any other two-component adhesive, Poxikol requires preliminary preparation before use. This is a simple process that even someone who has never encountered anything like this can easily handle. To prepare the glue, squeeze out an equal amount of paste from both tubes and mix thoroughly. The result should be an absolutely homogeneous mass.

For mixing, you can use the plate and spatula that come with the kit. Or you can take your own dishes, which you won’t mind throwing away after that. It is especially worth noting that the container used for preparation must be clean.

Important! It is necessary to work with Poxirol glue outdoors or in a well-ventilated area. Trimethylamine vapor, which is part of the hardener, can have a negative effect on your health.

It is necessary to use the finished glue within 5 – 6 minutes. After this time, due to the ongoing chemical reaction, the composition will completely harden.

Technical characteristics of Poxipol

• Cold welding creates a seam that is similar in quality to a joint formed by metal welding.
• The glue is easy to apply, it holds its shape, does not spread, does not form streaks even on vertical surfaces, and does not increase in volume.

• After drying, it does not dry out or become deformed.
• It contains no solvents, does not emit a strong odor, and can be used to glue children's toys.
• In the open air it is not toxic, but the adhesive seam should not be in constant contact with water in open reservoirs, as it can harm their inhabitants.

It is impossible to carry out gluing under water, but after 10 minutes. After applying Poxipol, the glued object can be immersed in liquid. Detachment will not occur. The composition is non-flammable. Only properly combined epoxy with a hardener has the listed properties.

Cold welding Poxipol

The material got its name due to its ability to create a seam, which in its basic parameters is not inferior to a metal weld. In this case, there is no heat source that could provide heating to the surfaces. This allows you to preserve the structure of the material. By comparison, the disadvantage of a weld is that it changes the properties of the metal, which can affect its strength characteristics.

Poxypol is a transparent glue (in most cases). Its composition is similar to mixtures based on epoxy resin. This glue is available in two tubes. When considering the question of what cold welding is, you should know that it is a two-component composition. One tube contains epoxy resin, the other contains hardener. When joining materials, an adhesive with excellent technical characteristics is obtained.

Composition of a tube marked A:

• epoxy resin;
• rheological modifier;
• filler.

Epoxy resin is a complex structure of oligomers. These are links of oxygen and carbon atoms, from which 2 single bonds extend. The tube marked B contains:

• tertiary amine;
• filler;
• mercaptan resin.

The last of the components is used as a hardener. This substance reacts with epoxy resins in liquid form. This process is realized with the participation of a tertiary amine. The epoxy resin modifier helps produce a white substance. The adhesive composition can be transparent, gray or colored. Thanks to the modifier, the mixture acquires a number of properties, due to which the service life of the material is increased. Thus, it becomes resistant to shrinkage, which avoids the need for re-application.

After combining with a modifier, the resin acquires moisture resistance, elasticity, and impact strength. In terms of its set of properties, this material is superior to modern analogues. High adhesion after mixing with the modifier is due to a decrease in the viscosity of the substance. Thanks to this, the epoxy resin acquires the ability to be partially absorbed into porous materials.

The absence of the need to heat the surfaces and the adhesive, and at the same time ensuring high adhesion strength, is due to the fact that mercaptan groups are located at the ends of the chain in the structure. This strengthens the seam. To make the material dry faster, along with the listed substances, anhydrides or polyamines are used.

Poxipol two-component adhesive can be used in different conditions. In most cases, parts are processed in air. However, it is permissible to use such a composition in an oil environment and when the protected surface is immersed in water. At the same time, the glue retains its properties. Exposure to a liquid environment does not affect the strength of the seam.

Thanks to elasticity, it becomes possible to adjust the position of the connected structural elements. The material dries within more than a day. When gluing 2 parts, it is recommended to provide a press effect: they are pressed together and held in this position for several minutes. When Poxipol epoxy adhesive is used to eliminate minor defects on various surfaces, it can simply be left to further harden without squeezing.

To strengthen the material, metal shavings are often added to the adhesive mixture. This measure improves adhesion, which helps to increase the service life of the seam. First of all, the use of metal shavings is due to the need to increase the resistance of the connection to dynamic, impact loads.

After applying the glue, it is allowed to adjust the position of the products no later than after 10 minutes. If you move them after this period of time, the quality of the docking may decrease. This is due to the breaking of formed bonds at the molecular level. On sale you can find cold welding Poxipol 70 ml, 7 and 14 ml. It must be taken into account that there are materials of different composition. Thus, transparent glue is used as a dielectric. Its auxiliary function is to block the process of transmitting electrical impulses.

When the material is completely dry, it is allowed to proceed to further processing of the section of the structure where the glue was used. Here you can use the drilling method, install standard fasteners, drill, and tap threads.

Application area

Instructions for use and technical characteristics of this glue are fully posted on the manufacturer’s website. It tells in detail in what areas it can be used and what properties it has.

So, it glues metal, plastic, and wooden products. Also porcelain tiles, porcelain, earthenware, marble, concrete. More rubber and glass. By the way, you can find out about other effective brands of adhesives for metal here https://kraskaguru.ru/klej/dlya-stroitelstva/po-metallu.html.

Perfect for home repairs in workshops, designing various kinds of crafts. Assembly, fastening, connection of furniture interior made of wood or metal. Particularly recommended for items experiencing fairly heavy loads. Remember this. Let's say - slats and crossbars for beds, crossbars for stools. Legs of tables, chairs, armchairs.

Repairing wooden or metal doors and windows, attaching hinges. Leaky tanks and water containers. Filling and repairing cracks in sinks, bathtubs, and toilets. Fastening the handles of hand-held equipment. Almost the entire list, from a heavy hammer to a light mop. Bonding marble and granite blocks.

For restoration of stucco, monuments made of concrete, plaster or marble. Fastening various accessories. For support in walls to hang heavy objects. In country gardening, installation of fasteners for hanging objects, tools and massive decorations.

Patching radiators made of non-ferrous alloys and fuel tanks on cars or motorcycles. Also other household items. Boat frames or car bodies. Strengthening and joining seams in vehicles. Restores threaded connections. Joining and repairing garden furniture from the main materials used.

Restoration of vases, flower pots, large porcelain items, fountains in gardening. Bonding of concrete pipes for drains or storm gutters. Plastic drainage systems. As you can see, the possibilities are great.

Advantages and disadvantages

Among the advantages of Poxipol, users highlight the following:

1. Versatility. The adhesive is suitable for restoring various objects and fixing various materials. But it is preferable to use Poxipol when working with metal, with which this product provides the most durable connection.
2. Allows you to quickly restore damaged items. Poxipol eliminates the need to purchase a new faucet, as it provides strong metal adhesion for a long time.
3. Ease of use. To glue damaged parts, just mix the components from two tubes, apply to the fragments and connect the latter to each other, pressing for 2-3 minutes.
4. You can apply several layers of glue. This feature allows you to eliminate deficiencies after the repair is completed.
5. Transparent consistency. Thanks to this, after application Poxipol remains invisible from the outside.

Poxipol has a wide range of applications and is non-toxic for both people and pets. Among the disadvantages of glue are low tensile strength, inability to withstand high temperatures and vibrations.

Composition and release forms

Poxipol is sold in two tubes. In one, epoxy resin with fillers is the main composition of a paste-like consistency. The second tube contains trimethylamine hardener with modifiers and other components. Before gluing the items, the contents of both tubes are mixed. The set includes a spatula, which is convenient for mixing ingredients, and a special plate.

1. Transparent (red packaging). This is a colorless Poxipol of medium thickness, which is mixed in a disposable container or using a spatula. Is a dielectric.
2. Matte (blue packaging). A means for gluing metal, the consistency of which resembles a plasticine-like mass that can be kneaded by hand. You can seal holes and other defects. The glue can be white, metallic or gray-brown in color. Quality and characteristics do not depend on color.

Security measures

"Poxipol", the temperature of use of which should not differ from the recommended one, is used in accordance with safety measures

It is important to avoid contact of the composition with the skin and eyes, as this may cause irritation. If this does happen, then it is necessary to wash the skin with a solution of soapy water.

When cured, the material is non-toxic.

Fast tool welding

The tools are only pushed in and out of the welding press. Setting up new products is a simple exercise. Tools can be changed with a few hand movements. The annoying and time-consuming process of monitoring the temperature of instruments is no longer necessary. This is why the ultrasonic welding process is called the cold welding process.

No cold welding - optically perfect and consistent welds result in high quality, very flat products with consistent optical quality. In thermal resistance welding, the heat is supplied from outside and must therefore be above the melting point of the material. This causes overheating and leads to food depletion.

Advantages and disadvantages

The demand for Poxipol cold welding and the large number of positive reviews are due to a number of undeniable advantages of the material.

• The versatility of the product lies in the possibility of gluing together materials of different structure and density.
• Ease of use and availability of material. The composition can be purchased at any hardware or hardware store, which makes it even more popular among consumers.
• The possibility of forming a layer of any thickness is due to the composition’s resistance to deformation and the preservation of the original volume after drying.

• Due to its thick consistency, the composition is excellent for working on vertical surfaces.
• The absence of solvents in the adhesive allows the composition to be used in residential areas in the presence of children and animals.
• Resistance to water makes it possible to use the adhesive in rooms with high humidity. The product can be used under moderate exposure to sulfuric and hydrochloric acids, gasoline and toluene.
• The material does not leave marks after drying, which allows you to glue objects together without fear of streaks and stains.

The disadvantages of Poxipol cold welding include the low melting point of 120 degrees, which significantly limits the scope of application of the glue. The small packaging of the Poxipol 00266 and 00267 models is noted, having a volume of 14 ml, as well as a long time for the product to dry completely. Low tensile strength excludes the use of glue for work with parts that are subject to vibration and shock. The disadvantages include the need for careful preparation of working surfaces with mandatory degreasing and dust removal of parts.

When to use

This mixture is most often used at home for domestic purposes. It is best suited for fastening small metal parts, sealing holes in containers, and connecting plastic parts.

When using, you do not need to have any special devices or substances.

It is recommended to use this glue only for parts that will not subsequently be subject to serious physical impact.

This product can be used to bond ceramic parts, as it does not leave any traces of use.

The adhesive mixture can also be used to repair decorative elements. Poxypol is a fairly soft glue that has the consistency of stationery plasticine, so it can be crushed and placed in the desired hole of the decorative element. The packaging volume of the product is small, so its capacity may only be enough for minor decorative work. After drying, the substance holds its shape very well.