What kind of oil should be poured into a piston air compressor?

Source of material: Kuznetsov A.I., Timofeev F.V., Kuznetsov A.A., Kormilitsyna V.E. Educational and reference manual. Petroleum products. in 2 hours. Part 1. Classification, nomenclature, regulatory requirements for quality. Ed. Ulyanovsk State University, Ulyanovsk, 2018, 249 p.

The subgroup of compressor oils includes oils intended for use as a lubricant for various types of compressors.

In accordance with their functional purpose, compressor oils are divided into 3 classes (Fig. 2).

Rice. 2. Division into classes of compressor oils

Functions of compressor oil

The lubricant material solves a number of problems aimed at ensuring stable operation of the compressor:

lubricates rubbing parts, thereby extending their service life;
cools the piston group, which heats up during operation;
seals gaps;
reduces detonation;
ensures the tightness of the working chamber.

Insufficient oil level or absence of oil leads to a decrease in the tightness of the compression chamber and a deterioration in compressor performance.

Which oil is best to pour into a piston air compressor - basic properties

The design features of the piston unit dictate special requirements for lubricants that can ensure its uninterrupted operation. Ideal for lubrication is a closed oil pipeline system and a sealed housing. In a reciprocating compressor, the top parts of the piston and cylinder are in contact with the environment, and the oil supplied to the piston group contaminates the compressed air. There is no mechanical separation of the lubrication zone from the compressed air generation zone. This design feature requires finding a solution to two dissimilar problems:

on the one hand, it is necessary to reduce the amount of lubricant to an acceptable minimum in order to ensure the purity of the compressed air;
on the other hand, it is necessary to provide high-quality lubrication of the rubbing elements.

To solve these problems, the oil that needs to be poured into the air compressor must have special properties:

good adhesion, due to which the lubricant is kept in a limited area and does not enter the air stream;
stability of properties with increasing temperature - this is important, since the unit is prone to heating;
high flash point, ensuring fire safety of the unit;
ability to displace water particles;
a strictly standardized viscosity value - a composition that is too liquid will flow out of the lubrication zone, and a composition that is too thick will be ineffective;
minimal tendency to carbon deposits.

There is another important requirement that applies to all lubricants - the absence of substances harmful to the environment and human health.

Owners of air piston compressors often ask the question: is it possible to use automotive oils for internal combustion engines?

Answer: it is not recommended to use them in the piston group, since they do not have the necessary qualities. Compressor oil meets improved environmental characteristics compared to automobile oil, provides higher fire safety, and has other optimal viscosity parameters.

Air compressor. Filling with Oil. First Start.

Foreign standards, but not alien

The existing range of compressor oils is wide. Its increase is due to the growing demand for compressed air, the development of compressor designs, and tightening requirements for their performance, reliability and energy efficiency.

Compressor oils of various viscosity classes are offered by the main players in the Russian oil industry (compressor oil LUKOIL, ROSNEFT).

As foreign trade liberalized, foreign-made products appeared on the domestic market, manufactured taking into account the latest advances in oil refining technologies (SHELL compressor oil, MOBIL compressor oil).

It is not surprising that today in Russia brands of compressor oil have become widespread, the production of which is regulated by European standards (DIN 51506-2017, ISO 6743-3A).

In DIN 51506-2017, compressor oils are classified into groups depending on the final temperature of the compressed air:

VB, VB-L – up to 140°C;
VC, VC-L – up to 160°C;
VD, VD-L – up to 220°C.

They differ in their aging resistance (VDL compressor oil is especially resistant). “V” means compressor oil, “L” indicates the presence of additives.

Manufacturers, in order for their products to be easily recognizable on the market, give them their own names (SHELL CORENA compressor oil, MOBIL RARUS compressor oil, LUKOIL STABIO compressor oil). If the name contains (or implies, ─ as indicated by the reference to DIN 51506-2017) a combination of the letters VD, VDL (VD-L), VB, VBL (VB-L), VC, VCL (VC-L), present in Brand numbers in most cases indicate the kinematic viscosity of the oil at 40 OC. It is equal to the ISO viscosity grade with relatively small deviations (± 10%).

Examples: compressor oil 32, compressor oil 46, compressor oil 100 (for example, compressor oil VDL 100 or compressor oil VG 100), compressor oil 150.

The brand of compressor oil may contain a direct reference to its ISO viscosity ─ compressor oil ISO 100. Or a more specific example ─ Mannol Compressor Oil ISO 100.

Mannol Compressor Oil

Compressor oils Mannol Compressor Oil ─ one of the products of the company Sudheimer Car Technik-Vertriebs GmbH ─ is represented in Russia by the company BITECH (https://bi-teh.ru/). The German manufacturer produces a wide range of products, including lubricants and oils ─ industrial, motor, and transmission. Including compressor oil brands:

Mannol Compressor Oil ISO 46;
Mannol Compressor Oil ISO 100;
Mannol Compressor Oil ISO 150.

Mineral compressor oil Mannol Compressor Oil based on paraffin oils is used to lubricate piston, screw, and centrifugal air compressors, and Mannol Compressor Oil ISO 46 is also used for pneumatic tools. Its effectiveness is enhanced by the presence of ashless additives.

Mannol Compressor Oil has vital properties for compressors:

thermal stability;
oxidation stability;
anti-corrosion properties;
low volatility;
leaves minimal deposits.

All of them help to guarantee stable, reliable operation of the equipment.

Buying compressor oil Mannol Compressor Oil means making the right choice for the correct operation of compressors.

Compressor oil manufactured in northern Germany is distinguished by high quality and compliance with the requirements set by consumers for this type of product.

A few lines below about the requirements, but now we list the main functions of compressor oil.

Compressor oil functions:

lubrication;

lubrication of rubbing surfaces reduces abrasive wear of parts, reduces energy losses caused by friction, ensures the cleanliness of rubbing surfaces, helps prevent scuffing, jamming and other defects fraught with serious breakdowns and rapid wear;

cooling;

removal of excess heat is a necessary condition for the functioning of the compressor;

corrosion protection;
sealing gaps;

Having several orders of magnitude less fluidity than air, oil fills gaps, promoting better sealing of cavities.

The piston compressor lubrication system includes a pump, oil filter, thermostat, and oil cooler. Compressor oil for reciprocating compressors lubricates pistons, valves, bearings and crank mechanism. It forms a stable liquid layer between the rubbing surfaces (cylinder liner and piston ring).

Compressor oil for screw compressors lubricates shaft bearings, screws and gears (or just gears), helps reduce the temperature in the compression chamber, and seals the gaps between rotors.

Main characteristics taken into account when choosing compressor oils

The main properties of lubricants for compressors running on an electric motor or internal combustion engine:

Viscosity. Characterized by values 1-15. The optimal value is 10-12. This composition is well retained in the lubrication zone. A product with a lower viscosity is consumed very quickly. Viscosity also characterizes the tendency of a lubricant to lose performance at high temperatures. The higher the viscosity value, the more resistant the product is to heat.
Availability of additives. High-quality lubricants from well-known manufacturers always contain additives that increase valuable performance properties - anti-oxidation, anti-foaming, anti-corrosion, temperature stability. In domestic labeling, the presence of additives is indicated by the letter “P”, in foreign labeling – I.
Self-ignition temperature. For air compressors, lubricants with this parameter not lower than +350 °C are recommended.
Pour point. This is an important quality taken into account when it is necessary to operate compressor equipment in winter conditions.

Composition and capacity

Depending on operating conditions, different types of compressor oils can be used. When no increased requirements are placed on the oil, both mineral and synthetic oils with a basic set of additives can be used. Under intense loads and extreme climatic conditions, special materials with an additional additive package are used. They are made from petroleum, which is deeply purified and then added with anti-wear additives, oxidation and corrosion inhibitors.

Compressor oils are usually supplied in containers made of plastic, holding 5, 10, 15 kg. They can be canisters, other vessels, as well as barrels with a capacity of 150–200 kg.

How to choose the right oil to fill an air piston compressor

The best option is to purchase the oil specified in the technical data sheet for the compressor and fill it in a volume that is slightly higher than that recommended by the manufacturer.

If the technical certificate for the equipment is missing for some reason, you can resort to the following methods:

find the official website of the manufacturer or company producing compressors with similar technical characteristics;
get advice from a store that is an official dealer of the brand, or from a service center that services such units;
When purchasing used equipment, ask the seller about the features of servicing compressor equipment.

A particularly important characteristic that must be taken into account when choosing a lubricant is temperature limitation.

Shell Corena S2 P 100

One of the best compressor oils on the Russian market. Due to its manufacturing features, it has characteristics that bring its quality closer to synthetic oils. Shell Corena S2 P 100 has a long service life. Thanks to its use, you can significantly increase the frequency of scheduled equipment maintenance.

The oil has the following advantages:

High anti-corrosion properties. Allows you to reliably protect the main components of equipment. Metal surfaces are practically not exposed to corrosion.
Excellent anti-foam characteristics. Thanks to them, air will be released from the total mass of oil without unnecessary foaming.
Demulsifying properties. These properties ensure rapid removal of water formed in the system. This property allows you to improve the performance characteristics of the equipment, and also significantly reduces the likelihood of corrosion.

Examples of oil labeling

K-19, KS-19 are low-sulfur oils that can be used in medium and high pressure compressors.
K3-10 – compositions that maintain performance characteristics up to +200 °C.
K2-24, K3-20, K4-20, K2-220 - such oils can be poured both into compressor engines and into the piston area.
VB, VB-I, DAG – are designed for use in any type of compressor equipment in which the temperature does not exceed +140 °C. The presence of the letter I in the designation indicates the presence of special additives that increase the performance properties of the lubricant composition.
VC, VC-I, DAA. They are in demand in permanently installed units with a temperature limit of +160 °C, and in mobile units operated in open space, +220 °C.
VD, VD-I, DAB. Such oils are poured into powerful air piston compressors with a temperature limit of +220 °C, regardless of the location of operation of the equipment.

Production

The use of a synthetic base for the manufacture of KS-19 is excluded by GOST requirements.

During processing by hydrotreating, sulfur content is reduced simultaneously with the proportion of oxygen-containing compounds, which provides the lubricant with minimal oxidation.

The base is brought to the required viscosity, then the required minimum of additives is added. Let's summarize

KS-19 oil has the required kinematic viscosity, high temperature stability with a low degree of self-ignition. It has a number of advantages, which are confirmed both by tests and by the experience of users of compressor devices - domestic and industrial.

What makes the lubricant accessible to all categories of consumers is not only the optimal price, but also the variety of liquid pouring options.

It is possible to replace KS-19 with MS-20 oil.

Specialists in the supply departments of enterprises are offered draft KS-19 in any required quantities. And for everyday use, the oil is sold in cans and bottles of various sizes, which gives convenience and freedom of choice.

DVR NEOLINE X-COP 9100S

Fugicar FC8 mirror-on-board computer

Black Size – gel for penis enlargement

Compressor oil KS-19

What kind of oil goes into an air piston compressor - recommended brands

For uninterrupted operation of air compressor equipment, it is recommended to use only special certified compounds. Possible options:

Ariane K-12. Inexpensive mineral oil, which is poured into compressors providing medium and high pressure levels. Features a reduced amount of sulfur. Another low-sulfur product is Ariane K-28. Its advantage is the complete absence of mechanical inclusions.
BP Enersyn GCS-180. A synthetic composition that cannot be combined with a mineral one. Designed specifically for piston compressor units. Contains antioxidants.
Fubag. Oils of this German brand can be used in air compressors of other brands, including Chinese ones. They contain a complex of additives that prevent oxidation processes at any temperature and the formation of coke deposits.

KM100 Enkor 40612. Economical due to the minimum level of evaporation. This oil can be poured into the compressor in winter, since it is adapted to work at low temperatures.

Mobile Rarus. Product suitable for all types of air compressors. It is characterized by: reduced viscosity, high combustion temperature, low ability to form carbon deposits.
Mineral oil "Zubr ZMK-PS" is an acceptable option for household compressors. This wear-resistant product does not require frequent replacement.

Shell Corena S4 R 46

The oil is developed using a unique technology. Its main feature is that improved additives are added during manufacturing. They provide high quality oil and maximum equipment protection. This type of oil does not lose its performance properties even when used in extreme conditions.

Main advantages:

Thermal stability and excellent anti-corrosion properties. The oil reliably protects metal surfaces from premature wear and corrosion.
Availability of an ashless package of anti-wear additives. Allows you to increase the service life of bearings.
Excellent anti-foam properties. The air is separated from the oil without creating much foam.
The production technology ensures complete environmental safety of the oil.

Which oil is better to pour into the compressor - mineral or synthetic?

Mineral products are cheaper. They are usually used in compressor equipment used periodically, since they have a short operating period. Mineral lubricants are characterized by a strict temperature limit, usually +90 °C. At higher operating temperatures, the oil may ignite or cause detonation.

Synthetic compressor oils have a higher price, justified by a set of valuable characteristics:

possibility of use at elevated operating temperatures: +180…+200 °C;
maintaining performance characteristics at subzero temperatures, which allows the use of synthetic lubricants in winter;
long service life, which is 3-4 times higher than that of mineral products.

Synthetic compressor oils are usually purchased for powerful, frequently used units.