Often, renovations in the hallway raise a lot of questions and controversial situations. It would seem that this is not a kitchen, where everything is subject to the demands of a demanding housewife, and not a living room, from which comfort is expected for guests and owners. But the hallway creates the first impression of your home, so we’ll talk about finishing work in this room.
In order for your home to always delight you with its original appearance, you need to pay great attention to the design of the hallway.
Furniture and products made of artificial stone in the interior
Various stone products and furniture are currently quite popular and represent a brutal, but at the same time very sophisticated interior element.
Due to its discreet and sophisticated appearance, a stone sink can complement any design.
Plumbing
Monolithic sanitary ware, such as a bathtub or toilet, is distinguished by excellent tactile sensations during operation and gives the environment a special personality. A stone heated towel rail has increased heat transfer and evenly heats the surface.
The photo shows a toilet with a bidet made of decorative stone in the interior of the bathroom.
Tabletop
A kitchen countertop or base with a washbasin is distinguished not only by its interesting appearance, but also by its good technical qualities, allowing you to achieve excellent results when using it.
Bar counters
They will undoubtedly become an image item and an unusual interior element, which will make the atmosphere much more original and expressive.
The photo shows a kitchen interior with a bar counter made of liquid decorative stone.
Window sill made of decorative stone
It has a truly expensive, stylish look and is in no way inferior to a window sill made of natural material. A huge number of mineral coloring pigments and various additives provide a huge variation of shades and decor.
Accessories
There are a wide variety of accessories, such as table or floor vases, that look very aesthetically pleasing, have natural beauty and, even without additional filling, undoubtedly attract attention, creating interesting installations. Exclusive stone cutting boards always look presentable and fit perfectly into any kitchen space
Also, mirrors framed in the form of decorative stone look no less luxurious and elegant.
Shelves
They can become quite a bright interior detail that can be easily filled with books, figurines, boxes, vases, photo frames and thereby give the room more coziness and homeliness.
Loft
In this corridor, brick is the main element of the interior. The entire space can be free, without additional zoning and with a minimum of design elements. The surface of the hallway walls is made of homogeneous, monochromatic stone with uneven edges. Preference is given to solid shades of light, beige or dark gray, without bright inclusions.
Brick hallway in a modern apartmentSource dizainexpert.ru
Original hallway interiorSource www.pinterest.com
Built-in wardrobe made of raw brickSource yellowhome.ru
Practice shows: brick in the interior of a hallway can be used for two purposes:
- To focus the attention of others on the overall finishing concept.
- As an applied technical tool. For example, plastic that imitates brick, located at the bottom of the corridor wall, not only plays an aesthetic role, but also protects them from dirt. The most relevant solution is for families with small children.
Peculiarities
Artificial brick is a specially made decorative tile, the thickness of which does not exceed 2 centimeters. This makes it possible to renovate the apartment without losing space.
In addition, the range of colors, as well as the sizes of this material can be very diverse. In the interior, artificial brick is used to decorate walls in a variety of rooms. They can safely decorate a wall in the hallway, toilet, even in the bedroom. However, decorative brick is most often used in the hallway.
The disadvantages include surface roughness, as well as very low hygroscopicity. This leads to the fact that the material cannot be used in all areas.
Interesting ideas for gluing
Covering walls with stone wallpaper around the entire perimeter looks redundant, so in modern design, only accents are most often used. We offer several interesting ideas for decorating the interior of a corridor with accents:
- Combining surfaces with metal or glass elements. Take a look at the photo;
- the use of such wallpaper at the junction of the kitchen and the corridor. Look at the photo;
- finishing of door and window openings, which will make the space wider. Take a look at the photo;
- framing furniture using stone coverings. See how it looks in the photo.
Coloring option
In bulk
It is considered the most practical and best way. In this case, coloring pigments in powder form, which are used for concrete, are added directly to the gypsum solution. Thus, you receive a product that is painted from the inside. When cutting or chipping, you will not see the white base.
A beige or yellow solution is best, and in polyurethane form, parts of the stones can be painted with liquid pigments using a brush.
For this:
- take ½ tsp. color (pigment);
- add 200 ml of water;
- add 200 ml of any acrylic primer.
When the stone has set, remove it from the mold and dry it, and after laying it on the surface, apply a matte water-based varnish to it.
This option for painting decorative gypsum stone is the most effective and almost all manufacturers use it. That’s why we can see these kinds of products in stores. The disadvantage of this method is the rough and unnatural painting, which can be observed at close range.
By making gypsum artificial stone yourself, you have the opportunity to work on naturalness by carefully painting parts of the stones in the mold. Of course, no one will do this on an industrial scale, otherwise the price will increase significantly.
Below we will propose another painting technology that will help make a product from gypsum tiles that is more similar to natural stone. You will learn how to paint artificial stone so that it has the same natural veining and color scheme as natural stone.
Surface
Prepare:
- water-based (coloring pigment);
- water;
- spray or brush.
The instructions are simple - you need:
- add a coloring pigment to the water, you can even add several at once;
- dip a brush into the solution;
- saturate gypsum tiles with it.
Artificial gypsum stone has unique properties of developing shades that are similar to natural ones due to the absorption of tinted water.
In order to give gypsum stone the desired shade and color, you do not need to have an artistic education. Dip the brush into the colored water and paint the stone as you see fit.
Then you can tint some with a dark solution consisting of color pigment and water. You shouldn’t think too much about the palette, since each gypsum tile, even with the same texture, will absorb the solution differently, which will allow you to create an individual pattern each time.
You can also use any sprayers for work, for example:
- spray gun;
- sprayer for glass cleaning products.
Pour paint diluted with water-based tinting paste into a container and spray it onto the gypsum tiles. It is better to use several of these sprayers with different colors in your work so that you can treat different places on the stone. Then the painting process will be better and faster.
The advantage of painting yourself
- The store offers artificial stone in standard colors and with obvious artificial coloring. It does not have natural colored veins, like natural ones.
- You can purchase products in white or plain beige, glue them to the walls, and then paint them on the spot with water and coloring pigments diluted in it. This method makes masonry much more natural. (See also article.)
- Once the plaster stone has dried and become faded and pale in appearance, open it with any silky matte or matte varnish. This way you can restore the color saturation of the product, strengthen and protect its surface.
- If you want to achieve a “wet” effect on artificial stone, use varnishes, but be aware that this will slightly reduce the naturalness of the material.
Stone wallpaper in the hallway: an excellent choice for lovers of natural materials
There are situations when you already have an idea in your head related to a stone of a specific shape: of course, finding a natural stone that meets your expectations is quite difficult. With wallpaper made to look like stone, you can choose almost any shape or color, which may not even actually exist. This is also a significant advantage of imitation.
Related article: DSP on the floor: laying along logs, wooden gypsum board and video, do-it-yourself dry screed, thickness of warm floor
This simple finishing material can become the basis for your hallway design
Fiberglass wallpaper can be called the highest quality. They are very durable, wash well, and natural materials are used in their production. Among the disadvantages are that they are heavy and can come off over time; and also that they must be painted: at the same time, painting requires a lot of paint and material.
Finishing
When decorating a hallway with decorative bricks, you need to determine the area of the surface to be decorated. Then, having calculated the required amount of material and adding to it an additional 10-15% of the required amount, purchase raw materials. The reserve takes into account the loss of material during the fitting process, cutting or in case of accidental damage. In order not to take extra bricks, you can outline the boundaries of the masonry and prepare a diagram for the arrangement of fragments (especially important for bricks of different shapes and sizes). To simplify the task, the placement can be done on the floor, not forgetting to take into account the topography of the wall and the distance between the seams (the method allows you to adjust the laying order if the fragments do not match).
Having decided on the quantity, they prepare the wall, which involves the process of removing old paint, wallpaper and leveling the surface. For reliable fixation, use a deep penetration primer. You need to start installing the bricks from the corner: this eliminates the need to adjust the elements at the junction of the walls, which is problematic to do. When working, you should use a special glue for the specific coating chosen. The masonry is carried out from the bottom up in rows using the following technology: the joining seams between the bricks of the first row are placed in the center of the bricks of the next row. When laying materials that include shale and sandstone, seamless technology is used.
After the glue has dried, you need to wipe the surface with a damp, but not wet, cloth (this makes it easier to remove dust and other contaminants). It usually takes several days for the solution to dry completely. If antifungal treatment was not applied during the production of bricks, it is necessary to independently cover the laid surface with a special solution. This is a water-based varnish composition that protects the surface from contamination and accidental mechanical influences. It is applied after drying, gives the wall a glossy shine and visually expands the space.
As a budget finishing option, you can cladding one wall, on the surface of which it is better to highlight an arch, mirror or niche. You won’t need many bricks for such a renovation, and the decoration effect will pleasantly surprise you. For better design, you should purchase lightweight, wear-resistant materials. When choosing the main tone of the walls, you should not choose too dark shades, because often there is no natural light in the corridors. Considering the purpose and specifics of the corridors, it is preferable to use easily washable materials.
After completion of the work, it is recommended to cover the surface with spraying, the color of which will be a couple of tones darker than the shade of the artificial stone. This will make the surface more expressive. An interesting technique would be to highlight the outline of the masonry with bronze or dark gold paint. An additional coating of acrylic varnish will help make the brickwork glossy, and well-placed lighting will emphasize the aesthetics of artificial stones and make the corridor stylish and solid.
Color, size, texture
When choosing the color and size of artificial stone for the hallway, you need to take into account the presence (or absence) of natural light, the size of the room and the features of use.
Types of stone:
- Rubble. Outwardly similar to boulders or pebbles.
This decorative stone has a stylish and beautiful appearance.
- Chip stone. Gives the impression of untreated rock.
In order for it to gain expressiveness and unusual contours, it is important to add small touches to the material when designing.
- Sawn. It has clear geometric shapes and a rough surface.
The masonry will become voluminous if it is not highlighted with a contrasting outline, and spotlights will help to effectively highlight the cladding.
- Mosaic. It consists of stones of different sizes and shapes, forming a complete picture or ornament.
To make the composition in the hallway complete, it must be decorated with various accessories, mirrors and plants.
- Brick. The most common option, resembling brickwork in appearance.
The masonry must be done with seams or closely, and the grout should be done in a tone contrasting with the main color of the finish.
- Tiled. Stonework with polished surface.
The hallway is the room that should look special, so it’s worth choosing an original style for it.
- Fantasy. Variations on the theme of stones that do not exist in nature.
Decorative stone veneers are intended for finishing interior walls or fireplaces.
When choosing stone finishing for the hallway, you need to pay attention to the location of the lamps. A classic chandelier on the ceiling is not the most suitable option, but lighting on the wall will make the room spectacular and comfortable.
In remote rooms, you can use a partial finishing option, for example one wall or corners.
If the size of the hallway allows, place large green plants on the floor. This addition will enhance the impression of the unusual decoration of the room.
For a classic style, an excellent option would be to lay stone not only on the walls, but also on the floor or columns.
Room design
To make the design of any interior look beautiful and aesthetically pleasing, you need to choose the right areas and shades of the product. You should purchase something that will be in harmony with the palette of design and furniture.
Living room
It is necessary to pay extreme attention to the design of this room, since it is where various special events, family gatherings and meetings of friends are most often held. Modern interiors allow you to use an accent in the form of a brick wall, making the room more cozy and atmospheric. Masonry is a wonderful decorative element, so it is not necessary to decorate it in any way. If you still want to add something, you can place some beautiful photographs or posters on the masonry. They will look harmonious and will not clutter the room.
For the living room you can choose any shade of the product
It is important that it is successfully combined with the design. Some decorate one wall, while others decorate separate areas.
Both options look decent. A fireplace or stove made of brick looks incredibly attractive and interesting, as well as a niche located in the wall, which will create a special, pleasant and cozy environment. An ideal option for a living room combined with a kitchen is a medium-sized brick wall, which will help separate the zones.
Bedroom
Brick elements in the design look extremely warm, so quite often this element is used when decorating a bedroom. Brick combines well with a variety of facing materials. It is often used to decorate the wall at the head of beds or the one on which the TV panel is located. If the room is too narrow, and the back of the bed is located against a long wall, it is this surface that is decorated with interior brick. This allows you to make the room wider, as the wall moves away visually.
Hallway
If the corridor is small, decorating with light decorative material, the surface of which is glossy, is suitable. This option allows you to make the room larger and more spacious. Most often, this solution is used for Scandinavian style or minimalism. You can make a fragmentary finish with red brick, decorating the corners, areas at the joints of surfaces, arch areas and the entrance door opening. If the room is large, masonry can help with zoning.
Kitchen
Even if the room is extremely large, you should not use too much brick in its design, as this can ruin the interior. It is better to make brickwork a connecting link between different types of finishes. It is worth correctly determining the wall on which the material will be placed: the masonry should be on the surface on which natural light falls. If you want to use red brick, it is better to use sources of additional lighting, since such elements will absorb light.
Bathroom and toilet
The microclimate in the bathroom and toilet is specific, so interior brick is not a very good option for these rooms. If it is still used, the elements should be treated with a special agent that will rid the apartment owner of mold. It is also better to use an antibacterial composition. The rough surface of the brickwork and snow-white plumbing is a combination that looks extremely attractive. In most cases, surfaces are decorated using plastic panels or tiles that imitate brick.
Balcony
Decorating a loggia with decorative bricks is a good idea, because it looks harmonious and beautiful. If the balcony is small, you should choose thinner elements. With this decoration you can create a cozy and pleasant room for rest and relaxation. Both light and dark bricks are used. If desired, you can decorate the area around the doorway with gray or aged brick. Both options look very interesting and modern.
30 more photos in expensive apartments
Additionally, we have prepared several more options for photographs of decorative stone for your inspiration. We hope that everyone will find what is closest to them.
In a big house In a modern classic style In a cottage Bathroom in the country
Trim around the TV and fireplace in Egyptian style
With purple flowers In the relaxation area In the bathroom
Loft style
In a country house With a built-in fireplace In a modern house In an antique house
On the open terrace Painted black In the dining room for 5 people
In the style of Sherlock Holmes Jacuzzi Wall in the bathroom Sauna and shower
With an exit to the balcony Work office Country house Overlooking the forest City life Column next to the balcony Above the stove Work area
In a studio apartment
Peculiarities
Not every apartment can accommodate an additional brick row - buildings these days are built from metal and concrete, wood and frame structures have become the norm. Not every structure can withstand heavy brickwork. But you shouldn’t give up such a spectacular design option. An alternative could be gypsum tiles designed to look like brick.
It, like any other material, has certain pros and cons, knowledge of which will help you make the right choice.
Advantages:
- Safety. Gypsum is a material of natural origin, therefore, products based on it are environmentally friendly.
- Durability. Compared to many other finishing options, it has greater strength that is maintained throughout its service life. Often used in places most susceptible to abrasion and mechanical stress.
- Thermal insulation. Due to its low thermal conductivity, it retains heat inside the room, preventing the cold from penetrating outside. A wall covered with such material will never freeze.
- Noise insulation. The density of the material is high, sound permeability is low, and accordingly, noise penetration is minimized.
- Fire resistance. Withstands direct flame combustion temperatures and can be used for direct lining of stoves and fireplaces. When heated, it does not emit any hazardous substances.
- Maintaining a comfortable indoor microclimate. Absorbs excess moisture from the air, releases it in case of excessive dryness, and evens out the temperature of the surrounding space.
- The ability to create a realistic texture, place accents, and emphasize the dynamism of the interior.
- Weight. Gluing can be carried out on any wall without reinforcement using almost any adhesive, and does not carry a global load on the floors.
- Ease of installation and processing. You can start work with absolutely no experience.
- There is no need to purchase additional equipment or special materials.
- Price. The price/quality ratio is ideal. The price of the material is low, moreover, it is possible to manufacture it yourself.
Flaws:
- More suitable for interior than exterior work.
- Excessive hygroscopicity is a contraindication to placing the material in street decoration; however, today the production of gypsum-cement boards has been launched, which is quite suitable for exterior finishing.
- Increased fragility. This indicator can be reduced by adding special substances at the manufacturing stage and treating the surface with them after installation.
- Difficulty in care. An untreated gypsum surface can accumulate dust.
- When tiles are placed in a room exposed to high humidity, they must be treated with additional protective and water-repellent solutions.
DIY stone wallpaper in the hallway (video)
If you are a nature lover, then you have two options for how to decorate your hallway: you can decorate it with expensive decorative stone, or its alternative - high-quality wallpaper. If you have enough money, you should not immediately purchase the most expensive material possible, ignoring ordinary wallpaper: after all, they also have their advantages, which were announced earlier. First, you should analyze all available information, the market, assortment, and only then purchase something. Your choice will always be the right one: after all, the most important thing is that you like the purchased product, first of all.
Enjoy the shopping!
Types of decorative finishing stone
Today there are three types of decorative artificial stone used for interior decoration:
- cement-based;
- gypsum based;
- agglomerate.
These products are very similar in appearance to natural stone, only they weigh much less (from 14 kg/m² to 50 kg/m²). The cost is also much lower (compared to natural), especially if the manufacturer is Russian or Belarusian. The advantages include easier installation - only the front part is textured, the other three are more reminiscent of tiles or bricks.
Actually, there is another type of artificial finishing stone - clinker tiles, imitating brickwork of various types. It is made from clay using almost brick technology - fired in a kiln and glazed. The difference in thickness is 1-3 cm. This type of finishing is good in many modern interiors - from high-tech to loft.
Samples of clinker tiles to imitate brickwork
Gypsum based
Gypsum finishing stone is the most inexpensive of this type of materials. Its second advantage is that it is the lightest. This is what is used when installing on drywall, since it simply cannot withstand heavy loads. Disadvantages - it is quite fragile, hygroscopic, and can collapse if wet. Decorating a hallway with decorative stone based on gypsum is possible only if, after installation, it is treated with a special protective impregnation or acrylic-based varnish.
The format of gypsum tiles can be any - a very plastic solution allows you to get any surface and shape Light shades in the hallways do not “press” or add heaviness Non-uniform color gives additional volume and charm Gypsum decorative stone in combination with a gypsum panel in the corridor - oriental style
Decorative stone especially stands out against the background of smooth wallsDifferent color options of one collection
Cement based
A strong and durable finishing stone is obtained from a gypsum-sand mixture. It can be washed, even with a brush and liquid detergent. Its disadvantages:
- Hard to cut. You will need a grinder with a diamond blade to reduce dust, you can wet the tiles.
- Heavy weight. This is when compared with a gypsum analogue, and compared to natural, the weight is more than half as low.
- Higher price. In the production of cement decorative stone, high-quality cement is used, and it costs a decent amount. In addition, the production technology affects the price - cement takes longer to gain the required strength (28 days), and until this moment the molded tiles must be stored somewhere, and under certain conditions (at a temperature of about 20°C and sufficient humidity of 40-50%). This means that significant areas for storage space are required, and this means additional costs.
All these shortcomings are compensated by durability and ease of maintenance, so this is one of the most common decorative stones for interior and exterior decoration.
Combination of decorative stone and wallpaper in the corridor
This type of decoration in the hallway is convenient in terms of cleaning
You can completely line the walls in the hallway with decorative cobblestones
Interesting color Light gray is just right for a small hallway If you decide to make such walls, the lighting should be bright An excellent option for decorating a fashionable loft style
Artificial agglomerate stone
This type of decorative finishing stone has appeared recently. It consists of natural rocks crushed to crumbs - marble, granite, quartzite - to which polymer resins or cement are added. To obtain bright colors, a coloring pigment is added. This decorative stone looks great - interspersed with natural fragments, reflections on the edges of the crumbs... It looks really good, suitable for finishing work indoors.
Granite agglomerateSamples on the stand from class=”aligncenter” width=”600″ height=”437″[/img]There can be many color options: quartz agglomerate
Painting methods
When choosing a collection made from gypsum or cement, pay attention to the method of painting. Pigment can be added to the solution, and then the entire tile will be the same color
Tints are then applied to its front surface, which give the surface a more natural look. With this technology, even when chipped, the difference will be unnoticeable, since the shades are close.
In another embodiment, the pigment is applied only to the surface. Then, if it is chipped or needs to be cut, the color will be very different.
Stylistic decisions
Considering the versatility of stone trellises, they can be used in any interior style. For example, in an environmental direction, canvases with imitation of natural slate would be appropriate.
The urban theme will be complemented and emphasized by canvases with brickwork and sandstone imitation.
Trellis with granite or marble surfaces will have an excellent look in a classic design.
Attention! The effectiveness of stone wallpaper is related to the degree of its relief.
For country, professionals recommend choosing natural gray stone that has an irregular shape.
Decorative brick in the living room interior
Let's answer two important questions first. Does brick always look good in a living room? Of course not! Can faux brick be used in living room decoration? Of course yes!
However, you yourself understand this perfectly well. It was said earlier that the bedroom should be cozy. Sure, but the living room should be more than just cozy. It should be the center of comfort in your home.
After all, the living room is where you spend most of your time in the house. A place where you relax, where you meet friends.
Speaking of a living room that has a brick wall, we can say that this wall becomes the center of your home. The wall that you get should not deny the entire decor of the house and contrast itself with all other design elements.
Maximalism in design is not for everyone. Before using brick in the interior of the living room as in the photo, think three times about the need for such a decision
When planning to use such material, always remember that in an apartment or house there is a room that is the center of your home. Therefore, it should be organized in the same style as the rest of the house. All rooms in your home should create a single whole with this center.
Well-designed brick living room interior. The almost pastel colors of the masonry are in perfect harmony with the overall color scheme of the entire furnishings and its details.
Brick tiles in the living room can make an accent wall, and spotlights will add an atmosphere of mystery and mystery
Real brick from the old masters can also be an excellent solution for adding style to the living room
Is it worth decorating such a wall in the living room?
In itself, such a design element is already an attractive element, but minor additions can positively enhance the effect. But under no circumstances should you overdo it with the amount of additional decor. Extra redundant photos, pictures - all this will lead to the opposite effect.
Attach two or three family photos from a long trip or an interesting painting to this wall. Also, if possible, install a fireplace near the wall. It's a really good idea to have a simple electric fireplace and a few directional spotlights. Family comfort and an atmosphere of calm and tranquility are guaranteed to you.
This is no longer just a few rows of laid tiles. This brick living room with a fireplace really takes us back to the old days and creates a feeling of comfort and warmth.
Natural, familiar colors are a frequent choice of designers
Hallway renovation and alterations
The usual whitewash and wallpaper are becoming a thing of the past. It's time to change the very vision of home, living space, place for relaxation and comfortable living. Regular room shapes are becoming a thing of the past. Sliding doors and large French windows are already being installed, and artificial stone finishing is widely used in the hallway.
Living in step with nature is fashionable and correct, we have forgotten a little that we ourselves once came out of it, we try to create sad, impersonal interiors around us, filled with furniture and trinkets.
To transform a room into an elegant space, you will have to remove all the old plaster, replace the lighting fixtures, straighten the walls and create arched openings if necessary. In this work, you can use both soft putty and drywall.
Even a small section of the wall in the hallway, trimmed with stone, turns the room into a wonderful entrance area. Use all the possibilities of stone finishing in your home, let stability and comfort reign in it.
What adhesive composition is used for work?
The most popular compositions:
- tile adhesive;
- mastic;
- cement-sand mortar.
The latter composition has significant disadvantages: it is not plastic and takes a long time to harden. Its advantage is its low price. Prepared in proportions 3:1. Sand makes up the majority of the solution.
Tile adhesive is diluted according to the instructions on the package. The glue is flexible, easy to dilute and apply. Glue residues are easily removed from the surface. Glue has a significant drawback - the adhesive mass does not get into the cracks of the brick, which reduces the adhesion area. There remains a risk of air bubbles, which can lead to deformation and destruction of the cladding.
The mastic is thick and has good adhesive properties. It is suitable for working with brick and plaster. There is only one drawback - it is difficult to apply the mastic in a thin layer.
The cement-sand mixture does not adhere to plaster, so it is not used if it is necessary to veneer a plastered surface. PVA glue is suitable for plaster walls: it is inexpensive, elastic, sets quickly and does not shrink.
