Round Threaded Knurling Rollers

Round thread knurling rollers vary greatly in design, thread profile location, and operating pattern. The roller (Fig. 24) is a cylindrical body with a screw or ring thread on the surface of the cylinder. One to three or more rollers can be used simultaneously.

Rice. 24. Round threaded knurling roller

The process of forming threads on a workpiece can be carried out using radial, tangential, axial or combined feeds of the knurling roller. Schemes for rolling threads with rollers using various methods are shown in Fig. 25.

Rice. 25. Schemes for rolling threads with rollers: a - with radial feed: b, c, d - with tangential feed

Thread rolling with screw-threaded rollers with radial feed (Fig. 25, a) can be done with one, two, three or more rollers. Accordingly, the rollers in the knurling head are installed with an axial offset of 1/2, 1/3 steps, etc. The direction of the turns on the roller is opposite to the direction of the thread on the workpiece. The thread profile when rolling with rollers is formed gradually, by pressing the roller bits to the full depth over several revolutions of the workpiece. The number of these revolutions is determined by the depth of the rolled thread and the amount of radial feed, which in turn is assigned depending on the material of the workpiece being processed and its shape. In this way, it is possible to roll threads even on thin-walled workpieces, since it is possible by changing the feed to influence the forces that arise during thread rolling. The width of the roller covers the length of the rolled thread. The workpiece does not move in the axial direction. The axes of the workpiece and the rollers are parallel, and since the diameter of the roller is greater than the diameter of the rolled thread, in order for the helix angle of the rolled thread and the thread on the roller to be the same, the roller must have a multi-start thread. The number of starts i of the roller thread is determined from the relation de Dcp. roll—average roller diameter, mm; dcp - average diameter of rolled thread, mm.

Tangential feed when rolling threads with rollers is obtained in various ways. For this purpose, for example, the difference in peripheral speeds on the outer surface of the rollers is used. Two rollers (Fig. 25, b) of the same diameter are given different rotation speeds n1 and n2, or two rollers of different diameters (Fig. 25, c) are given the same rotation speed n. The rollers rotate in one direction, the workpiece is captured by the rollers, set into rotation and gradually moves downwards on its own. The thread profile is formed gradually. The distance between the axes of the rollers remains constant during thread rolling. The rollers have a multi-start screw thread; the number of starts must be a multiple of the diameter of the rolled thread and is determined by the previously given formula.

Tangential feed when rolling threads can also be achieved due to the special design of the rollers. These rollers (Fig. 25, d) have recesses for placing and subsequent removal of the workpiece, and on the remaining screw threaded section there is an intake, calibrating and discharging part. The calibrating and discharging parts have a full thread profile, and the intake part is cut along an Archimedean spiral and in its profile resembles the thread on the intake part of a flat die shown in Fig. 22, c. Rollers of the same diameter rotate in the same direction, the workpiece enters the recess, is captured by the rollers, set into rotation, and the thread is gradually extruded on it. The processing cycle is completed in one revolution of the rollers. The rollers have multi-start threads, the number of starts is a multiple of the diameter of the rolled thread.

To roll long threads, the workpiece or rollers must be moved along the axis of the workpiece. The rollers can be with a ring or screw thread. Axial movement of the workpiece relative to the rollers is ensured by appropriate installation of the knurling rollers to the workpiece axis. So, for example, when rolling a thread with two rollers with annular threading, their axes must be turned to the angle of elevation of the rolled thread, as shown in Fig. 25, a. When using rollers with screw threads, the elevation angle of which λroll differs from the elevation angle of the rolled thread λ (λroll can be greater or less than λ), the angle of rotation of the rollers relative to the workpiece axis will be equal to the difference λroll - λ. The axial feed speed σоc is determined by the formula , where σокр is the peripheral speed of the roller.

Rice. 26. Scheme of rolling long threads with rollers: a - with ring cutting; b - with screw thread

The rollers have a intake cone and a calibrating part. The intake cone allows you to distribute the load when rolling threads over several turns of the roller, as a result of which thread profiling is carried out gradually, which helps to improve the quality of the rolled thread.

Thread rolling rollers GOST 9539-72

Purpose: for the manufacture of threads with a diameter from 3 to 68 mm with a pitch of 0.5 to 6.0 mm according to GOST 24705

Accuracy classes: 1, 2 and 3 Taper: 1:16 Set: 2 pcs.
Price: on request
Leave a request

Designation examples when ordering: Roller set 1417-0520 2-1 GOST 9539-72 Roller set 1417-0520 2-1-LH GOST 9539-72

Thread rolling with rollers is the most versatile and accurate rolling method, characterized by the widest technological capabilities for the production of threads of various diameters, lengths and accuracy. With this method, two rollers are most often used.

We produce thread rolling rollers according to GOST 9539-72 and customer drawings. Cylindrical and conical threads.

Specifications:

Designation	Name	Diameter	Landing	Width
1417-0301	Thread rolling roller M3x0.5	96,588	45	25
1417-0302				32
1417-0303				40
1417-0304		139,388	54	25
1417-0305				32
1417-0306				40
1417-0307			63	25
1417-0308				32
1417-0309				40
1417-0310				50
1417-0311	Thread rolling roller M3.5x0.6	99,866	45	25
1417-0312				32
1417-0313				40
1417-0314		137,186	54	25
1417-0315				32
1417-0316				40
1417-0317			63	25
1417-0318				32
1417-0319				40
1417-0320				50
1417-0321	Thread rolling roller M4x0.5	103,188	45	32
1417-0322				40
1417-0323				50
1417-0324		139,938	54	32
1417-0325				40
1417-0326				50
1417-0327			63	32
1417-0328				40
1417-0329				50
1417-0330	Thread rolling roller M4x0.7	99,692	45	32
1417-0331				40
1417-0332				50
1417-0333		142,244	54	32
1417-0334				40
1417-0335				50
1417-0336			63	32
1417-0337				40
1417-0338				50
1417-0339	Thread rolling roller M4.5x0.5	100,488	45	32
1417-0340				40
1417-0341				50
1417-0342		142,238	54	32
1417-0343				40
1417-0344				50
1417-0345			63	32
1417-0346				40
1417-0347				50
1417-0348	Thread rolling roller M4.5x0.75	96,746	45	32
1417-0349				40
1417-0350				50
1417-0351		144,902	54	32
1417-0352				40
1417-0353				50
1417-0354			63	32
1417-0355				40
1417-0356				50
1417-0357	Thread rolling roller M5x0.5	103,138	45	32
1417-0358				40
1417-0359				50
1417-0360		140,538	54	32
1417-0361				40
1417-0362				50
1417-0363			63	32
1417-0364				40
1417-0365				50
1417-0366	Thread rolling roller M5x0.8	99,022	45	32
1417-0367				40
1417-0368				50
1417-0369		143,822	54	32
1417-0370				40
1417-0371				50
1417-0372			63	32
1417-0373				40
1417-0374				50
1417-0375	Thread rolling roller M5.5x0.5	103,788	45	32
1417-0376				40
1417-0377				50
1417-0378		145,188	54	32
1417-0379				40
1417-0380				50
1417-0381			63	32
1417-0382				40
1417-0383				50
1417-0384	Thread rolling roller M6x0.5	102,438	45	32
1417-0385				40
1417-0386				50
1417-0387		136,488	54	32
1417-0388				40
1417-0389				50
1417-0390			63	32
1417-0391				40
1417-0392				50
1417-0393				63
1417-0394	Thread rolling roller M6x0.75	99,668	45	32
1417-0395				40
1417-0396				50
1417-0397		143,772	54	32
1417-0398				40
1417-0399				50
1417-0400			63	32
1417-0401				40
1417-0402				50
1417-0403				63
1417-0404	Thread rolling roller M6x1	96,876	45	32
1417-0405				40
1417-0406				50
1417-0407				63
1417-0408		139,676	54	32
1417-0409				40
1417-0410				50
1417-0411				63
1417-0412			63	32
1417-0413				40
1417-0414				50
1417-0415				63
1417-0416	Thread rolling roller M7x0.5	93,738	45	32
1417-0417				40
1417-0418				50
1417-0419		133,788	54	32
1417-0420				40
1417-0421				50
1417-0422			63	32
1417-0423				40
1417-0424				50
1417-0425				63
1417-0426	Thread rolling roller M7x0.75	91,616	45	32
1417-0427				40
1417-0428				50
1417-0429		143,72	54	32
1417-0430				40
1417-0431				50
1417-0432			63	32
1417-0433				40
1417-0434				50
1417-0435				63
1417-0436	Thread rolling roller M7x1	102,176	45	32
1417-0437				40
1417-0438				50
1417-0439				63
1417-0440		140,276	54	32
1417-0441				40
1417-0442				50
1417-0443				63
1417-0444			63	32
1417-0445				40
1417-0446				50
1417-0447				63
1417-0448	Thread rolling roller M8x0.75	90,59	45	32
1417-0449				40
1417-0450				50
1417-0451		135,668		63
1417-0452			54	32
1417-0453				40
1417-0454				50
1417-0455				63
1417-0456			63	32
1417-0457				40
1417-0458				50
1417-0459				63
1417-0460	Thread rolling roller M8x1	103,476	45	32
1417-0461				40
1417-0462				50
1417-0463				63
1417-0464		132,876	54	32
1417-0465				40
1417-0466				50
1417-0467				63
1417-0468			63	32
1417-0469				40
1417-0470				50
1417-0471				63
1417-0472	Thread rolling roller M8x1.25	101,354	45	32
1417-0473				40
1417-0474				50
1417-0475				63
1417-0476		144,482	54	32
1417-0477				40
1417-0478				50
1417-0479				63
1417-0480			63	32
1417-0481				40
1417-0482				50
1417-0483				63
1417-0484	Thread rolling roller M9x0.75	102,59	45	32
1417-0485				40
1417-0486				50
1417-0487				63
1417-0488		136,642	54	32
1417-0489				40
1417-0490				50
1417-0491				63
1417-0492			63	32
1417-0493				40
1417-0494				50
1417-0495				63
1417-0496	Thread rolling roller M9x1	100,776	45	32
1417-0497				40
1417-0498				50
1417-0499				63
1417-0500		134,176	54	32
1417-0501				40
1417-0502				50
1417-0503				63
1417-0504			63	32
1417-0505				40
1417-0506				50
1417-0507				63
1417-0508	Thread rolling roller M9x1.25	98,978	45	32
1417-0509				40
1417-0510				50
1417-0511				63
1417-0512		131,73	54	32
1417-0513				40
1417-0514				50
1417-0515				63
1417-0516			63	32
1417-0517				40
1417-0518				50
1417-0519				63
1417-0520	Thread rolling roller M10x0.75	95,564	45	32
1417-0521				40
1417-0522				50
1417-0523				63
1417-0524		133,616	54	32
1417-0525				40
1417-0526				50
1417-0527				63
1417-0528			63	32
1417-0529				40
1417-0530				50
1417-0531				63
1417-0532		200,207	80	32
1417-0533				40
1417-0534				50
1417-0535				63
1417-0536			100	32
1417-0537				40
1417-0538				50
1417-0539				63
1417-0540	Thread rolling roller M10x1	94,076	45	32
1417-0541				40
1417-0542				50
1417-0543				63
1417-0544		131,476	54	32
1417-0545				40
1417-0546				50
1417-0547				63
1417-0548			63	32
1417-0549				40
1417-0550				50
1417-0551				63
1417-0552		196,926	80	32
1417-0553				40
1417-0554				50
1417-0555				63
1417-0556			100	32
1417-0557				40
1417-0558				50
1417-0559				63
1417-0560	Thread rolling roller M10x1.25	101,79	45	32
1417-0561				40
1417-0562				50
1417-0563				63
1417-0564		147,73	54	32
1417-0565				40
1417-0566				50
1417-0567				63
1417-0568			63	32
1417-0569				40
1417-0570				50
1417-0571				63
1417-0572		202,858	80	32
1417-0573				40
1417-0574				50
1417-0575				63
1417-0576			100	32
1417-0577				40
1417-0578				50
1417-0579				63
1417-0580	Thread rolling roller M10x1.5	91,124	45	32
1417-0581				40
1417-0582				50
1417-0583				63
1417-0584		145,28	54	32
1417-0585				40
1417-0586				50
1417-0587				63
1417-0588			63	32
1417-0589				40
1417-0590				50
1417-0591				63
1417-0592		199,436	80	32
1417-0593				40
1417-0594				50
1417-0595				63
1417-0596			100	32
1417-0597				40
1417-0598				50
1417-0599				63
1417-0600	Thread rolling roller M11x0.75	84,538	45	32
1417-0601				40
1417-0602				50
1417-0603				63
1417-0604		147,616	54	32
1417-0605				40
1417-0606				50
1417-0607				63
1417-0608			63	32
1417-0609				40
1417-0610				50
1417-0611				63
1417-0612		200,181	80	32
1417-0613				40
1417-0614				50
1417-0615				63
1417-0616			100	32
1417-0617				40
1417-0618				50
1417-0619				63
1417-0620	Thread rolling roller M11x1	104,076	45	32
1417-0621				40
1417-0622				50
1417-0623				63
1417-0624		145,476	54	32
1417-0625				40
1417-0626				50
1417-0627				63
1417-0628			63	32
1417-0629				40
1417-0630				50
1417-0631				63
1417-0632		197,226	80	32
1417-0633				40
1417-0634				50
1417-0635				63
1417-0636			100	32
1417-0637				40
1417-0638				50
1417-0639				63
1417-0640	Thread rolling roller M11x1.5	101,124	45	32
1417-0641				40
1417-0642				50
1417-0643				63
1417-0644		141,228	54	32
1417-0645				40
1417-0646				50
1417-0647				63
1417-0648			63	32
1417-0649				40
1417-0650				50
1417-0651				63
1417-0652		201,384	80	32
1417-0653				40
1417-0654				50
1417-0655				63
1417-0656			100	32
1417-0657				40
1417-0658				50
1417-0659				63
1417-0660	Thread rolling roller M12x0.75	92,538	45	32
1417-0661				40
1417-0662				50
1417-0663				63
1417-0664		138,59	54	32
1417-0665				40
1417-0666				50
1417-0667				63
1417-0668			63	32
1417-0669				40
1417-0670				50
1417-0671				63
1417-0672		196,155	80	32
1417-0673				40
1417-0674				50
1417-0675				63
1417-0676			100	32
1417-0677				40
1417-0678				50
1417-0679				63
1417-0680	Thread rolling roller M12x1	91,376	45	40
1417-0681				50
1417-0682				63
1417-0683				80
1417-0684		136,776	54	40
1417-0685				50
1417-0686				63
1417-0687				80
1417-0688			63	40
1417-0689				50
1417-0690				63
1417-0691				80
1417-0692		204,876	80	40
1417-0693				50
1417-0694				63
1417-0695				80
1417-0696			100	40
1417-0697				50
1417-0698				63
1417-0699				80
1417-0700	Thread rolling roller M12x1.25	90,226	45	40
1417-0701				50
1417-0702				63
1417-0703				80
1417-0704		134,978	54	40
1417-0705				50
1417-0706				63
1417-0707				80
1417-0708			63	40
1417-0709				50
1417-0710				63
1417-0711				80
1417-0712		202,106	80	40
1417-0713				50
1417-0714				63
1417-0715				80
1417-0716			100	40
1417-0717				50
1417-0718				63
1417-0719				80
1417-0720	Thread rolling roller M12x1.5	100,098	45	40
1417-0721				50
1417-0722				63
1417-0723				80
1417-0724		133,176	54	40
1417-0725				50
1417-0726				63
1417-0727				80
1417-0728			63	40
1417-0729				50
1417-0730				63
1417-0731				80
1417-0732		199,332	80	40
1417-0733				50
1417-0734				63
1417-0735				80
1417-0736			100	40
1417-0737				50
1417-0738				63
1417-0739				80
1417-0740	Thread rolling roller M12x1.75	98,777	45	40
1417-0741				50
1417-0742				63
1417-0743				80
1417-0744		131,366	54	40
1417-0745				50
1417-0746				63
1417-0747				80
1417-0748			63	40
1417-0749				50
1417-0750				63
1417-0751				80
1417-0752		196,544	80	40
1417-0753				50
1417-0754				63
1417-0755				80
1417-0756			100	40
1417-0757				50
1417-0758				63
1417-0759				80
1417-0760	Thread rolling roller M14x0.75	95,025	45	32
1417-0761				40
1417-0762				50
1417-0763				63
1417-0764		135,564	54	32
1417-0765				40
1417-0766				50
1417-0767				63
1417-0768			63	32
1417-0769				40
1417-0770				50
1417-0771				63
1417-0772		203,129	80	32
1417-0773				40
1417-0774				50
1417-0775				63
1417-0776			100	32
1417-0777				40
1417-0778				50
1417-0779				63
1417-0780	Thread rolling roller M14x1	94,026	45	40
1417-0781				50
1417-0782				63
1417-0783				80
1417-0784		134,076	54	40
1417-0785				50
1417-0786				63
1417-0787				80
1417-0788			63	40
1417-0789				50
1417-0790				63
1417-0791				80
1417-0792		200,826	80	40
1417-0793				50
1417-0794				63
1417-0795				80
1417-0796			100	40
1417-0797				50
1417-0798				63
1417-0799				80
1417-0800	Thread rolling roller M14x1.25	93,038	45	40
1417-0801				50
1417-0802				63
1417-0803				80
1417-0804		132,602	54	40
1417-0805				50
1417-0806				63
1417-0807				80
1417-0808			63	40
1417-0809				50
1417-0810				63
1417-0811				80
1417-0812		198,542	80	40
1417-0813				50
1417-0814				63
1417-0815				80
1417-0816			100	40
1417-0817				50
1417-0818				63
1417-0819				80
1417-0820	Thread rolling roller M14x1.5	92,046	45	40
1417-0821				50
1417-0822				63
1417-0823				80
1417-0824		131,124	54	40
1417-0825				50
1417-0826				63
1417-0827				80
1417-0828			63	40
1417-0829				50
1417-0830				63
1417-0831				80
1417-0832		196,254	80	40
1417-0833				50
1417-0834				63
1417-0835				80
1417-0836			100	40
1417-0837				50
1417-0838				63
1417-0839				80
1417-0840	Thread rolling roller M14x2	102,76	45	40
1417-0841				50
1417-0842				63
1417-0843				80
1417-0844		128,162	54	40
1417-0845				50
1417-0846				63
1417-0847				80
1417-0848			63	40
1417-0849				50
1417-0850				63
1417-0851				80
1417-0852		204,368	80	40
1417-0853				50
1417-0854				63
1417-0855				80
1417-0856			100	40
1417-0857				50
1417-0858				63
1417-0859				80
1417-0860	Thread rolling roller M15x1	101,026	45	40
1417-0861				50
1417-0862				63
1417-0863				80
1417-0864		144,076	54	40
1417-0865				50
1417-0866				63
1417-0867				80
1417-0868			63	40
1417-0869				50
1417-0870				63
1417-0871				80
1417-0872		201,476	80	40
1417-0873				50
1417-0874				63
1417-0875				80
1417-0876			100	40
1417-0877				50
1417-0878				63
1417-0879				80
1417-0880	Thread rolling roller M15x1.5	99,046	45	40
1417-0881				50
1417-0882				63
1417-0883				80
1417-0884		141,124	54	40
1417-0885				50
1417-0886				63
1417-0887				80
1417-0888			63	40
1417-0889				50
1417-0890				63
1417-0891				80
1417-0892		197,228	80	40
1417-0893				50
1417-0894				63
1417-0895				80
1417-0896		197,228	100	40
1417-0897				50
1417-0898				63
1417-0899				80
1417-0900	Thread rolling roller M16x0.75	93,512	45	32
1417-0901				40
1417-0902				50
1417-0903				63
1417-0904		140,051	54	32
1417-0905				40
1417-0906				50
1417-0907				63
1417-0908			63	32
1417-0909				40
1417-0910				50
1417-0911				63
1417-0912		202,103	80	32
1417-0914				50
1417-0915				63
1417-0916			100	32
1417-0917				40
1417-0918				50
1417-0919				63
1417-0920	Thread rolling roller M16x1	92,676	45	40
1417-0921				50
1417-0922				63
1417-0923				80
1417-0924		138,726	54	40
1417-0925				50
1417-0926				63
1417-0927				80
1417-0928			63	40
1417-0929				50
1417-0930				63
1417-0931				80
1417-0932		200,126	80	40
1417-0933				50
1417-0934				63
1417-0935				80
1417-0936			100	40
1417-0937				50
1417-0938				63
1417-0939				80
1417-0940	Thread rolling roller M16x1.5	91,02	45	40
1417-0941				50
1417-0942				63
1417-0943				80
1417-0944		136,098	54	40
1417-0945				50
1417-0946				63
1417-0947				80
1417-0948			63	40
1417-0949				50
1417-0950				63
1417-0951				80
1417-0952		196,202	80	40
1417-0953				50
1417-0954				63
1417-0955				80
1417-0956			100	40
1417-0957				50
1417-0958				63
1417-0959				80
1417-0960	Thread rolling roller M16x2	104,059	45	40
1417-0961				50
1417-0962				63
1417-0963				80
1417-0965			54	50
1417-0966				63
1417-0967				80
1417-0968			63	40
1417-0969				50
1417-0970				63
1417-0971				80
1417-0972		192,265	80	40
1417-0973				50
1417-0974				63
1417-0975				80
1417-0976			100	40
1417-0977				50
1417-0978				63
1417-0979				80
1417-0980	Thread rolling roller M17x1	98,676	45	40
1417-0981				50
1417-0982				63
1417-0983				80
1417-0984		131,376	54	40
1417-0985				50
1417-0986				63
1417-0987				80
1417-0988			63	40
1417-0989				50
1417-0990				63
1417-0991				80
1417-0992		196,776	80	40
1417-0993				50
1417-0994				63
1417-0995				80
1417-0996			100	40
1417-0997				50
1417-0998				63
1417-0999				80
1417-1000	Thread rolling roller M17x1.5	97,02	45	40
1417-1001				50
1417-1002				63
1417-1003				80
1417-1004		145,098	54	40
1417-1005				50
1417-1006				63
1417-1007				80
1417-1008			63	40
1417-1009				50
1417-1010				63
1417-1011				80
1417-1012		193,176	80	40
1417-1013				50
1417-1014				63
1417-1015				80
1417-1016			100	40
1417-1017				50
1417-1018				63
1417-1019				80
1417-1020	Thread rolling roller M18x0.75	87,999	45	32
1417-1021				40
1417-1022				50
1417-1023				63
1417-1024		140,538	54	32
1417-1025				40
1417-1026				50
1417-1027				63
1417-1028			63	32
1417-1029				40
1417-1030				50
1417-1031				63
1417-1032		193,077	80	32
1417-1033				40
1417-1034				50
1417-1035				63
1417-1036			100	32
1417-1037				40
1417-1038				50
1417-1039				63
1417-1040	Thread rolling roller M18x1	104,676	45	40
1417-1041				50
1417-1042				63
1417-1043				80
1417-1044		139,376	54	40
1417-1045				50
1417-1046				63
1417-1047				80
1417-1048			63	40
1417-1049				50
1417-1050				63
1417-1051				80
1417-1052		191,426	80	40
1417-1053				50
1417-1054				63
1417-1055				80
1417-1056			100	40
1417-1057				50
1417-1058				63
1417-1059				80
1417-1060	Thread rolling roller M18x1.5	103,02	45	40
1417-1061				50
1417-1062				63
1417-1063				80
1417-1064		137,072	54	40
1417-1065				50
1417-1066				63
1417-1067				80
1417-1068			63	40
1417-1069				50
1417-1070				63
1417-1071				80
1417-1072		205,176	80	40
1417-1073				50
1417-1074				63
1417-1075				80
1417-1076			100	40
1417-1077				50
1417-1078				63
1417-1079				80
1417-1080	Thread rolling roller M18x2	101,358	45	40
1417-1081				50
1417-1082				63
1417-1083				80
1417-1084		134,76	54	40
1417-1085				50
1417-1086				63
1417-1087				80
1417-1088			63	40
1417-1089				50
1417-1090				63
1417-1091				80
1417-1092		80	40
1417-1093			201,564	50
1417-1094				63
1417-1095				80
1417-1096		100		40
1417-1097				50
1417-1098				63
1417-1099				80
1417-1100	Thread rolling roller M18x2.5	99,698	45	40
1417-1101				50
1417-1102				63
1417-1103				80
1417-1104		132,45	54	40
1417-1105				50
1417-1106				63
1417-1107				80
1417-1108			63	40
1417-1109				50
1417-1110				63
1417-1111				80
1417-1112		197,954	80	40
1417-1113				50
1417-1114				63
1417-1115				80
1417-1116			100	40
1417-1117				50
1417-1118				63
1417-1119				80
1417-1120	Thread rolling roller M20x1	97,326	45	40
1417-1121				50
1417-1122				63
1417-1123				80
1417-1124		136,026	54	40
1417-1125				50
1417-1126				63
1417-1127				80
1417-1128			63	40
1417-1129				50
1417-1130				63
1417-1131				80
1417-1132		194,076	80	40
1417-1133				50
1417-1134				63
1417-1135				80
1417-1136			100	40
1417-1137				50
1417-1138				63
1417-1139				80
1417-1140	Thread rolling roller M20x1.5	95,994	45	40
1417-1141				50
1417-1142				63
1417-1143				80
1417-1144		134,046	54	50
1417-1145				63
1417-1146				80
1417-1147				100
1417-1148			63	50
1417-1149				63
1417-1150				80
1417-1151				100
1417-1152		191,124	80	50
1417-1153				63
1417-1154				80
1417-1155				100
1417-1156			100	50
1417-1157				63
1417-1158				80
1417-1159				100
1417-1160	Thread rolling roller M20x2	94,657	45	50
1417-1161				63
1417-1162				80
1417-1163				100
1417-1164		132,059	54	50
1417-1165				63
1417-1166				80
1417-1167				100
1417-1168			63	50
1417-1169				63
1417-1170				80
1417-1171				100
1417-1172		206,863	80	50
1417-1173				63
1417-1174				80
1417-1175				100
1417-1176		206,863	100	50
1417-1177				63
1417-1178				80
1417-1179				100
1417-1180	Thread rolling roller M20x2.5	93,322	45	50
1417-1181				63
1417-1182				80
1417-1183				100
1417-1184		130,074	54	50
1417-1185				63
1417-1186				80
1417-1187				100
1417-1188			63	50
1417-1189				63
1417-1190				80
1417-1191				100
1417-1192		203,578	80	50
1417-1193				63
1417-1194				80
1417-1195				100
1417-1196			100	50
1417-1197				63
1417-1198				80
1417-1199				100
1417-1200	Thread rolling roller M22x1	85,976	45	40
1417-1201				50
1417-1202				63
1417-1203				80
1417-1204	Thread rolling roller M22x1	128,676	54	40
1417-1205				50
1417-1206				63
1417-1207				80
1417-1208			63	40
1417-1209				50
1417-1210				63
1417-1211				80
1417-1212			80	40
1417-1213				50
1417-1214				63
1417-1215				80
1417-1216			100	40
1417-1217				50
1417-1218				63
1417-1219				80
1417-1220	Thread rolling roller M22x1.5	105,994	45	50
1417-1221				63
1417-1222				80
1417-1223				100
1417-1224		127,02	54	50
1417-1225				63
1417-1226				80
1417-1227				100
1417-1228			63	50
1417-1229				63
1417-1230				80
1417-1231				100
1417-1232		190,098	80	50
1417-1233				63
1417-1234				80
1417-1235				100
1417-1236			100	50
1417-1237				63
1417-1238				80
1417-1239				100
1417-1240	Thread rolling roller M22x2	104,657	45	50
1417-1241				63
1417-1242				80
1417-1243				100
1417-1244		125,358	54	50
1417-1245				63
1417-1246				80
1417-1247				100
1417-1248			63	50
1417-1249				63
1417-1250				80
1417-1251				100
1417-1252		187,461	80	50
1417-1253				63
1417-1254				80
1417-1255				100
1417-1256			100	50
1417-1257				63
1417-1258				80
1417-1259				100
1417-1260	Thread rolling roller M22x2.5	103,322	45	50
1417-1261				63
1417-1262				80
1417-1263				100
1417-1264		144,074	54	50
1417-1265				63
1417-1266				80
1417-1267				100
1417-1268			63	50
1417-1269				63
1417-1270				80
1417-1271				100
1417-1272		205,202	80	50
1417-1273				63
1417-1274				80
1417-1275				100
1417-1276			100	50
1417-1277				63
1417-1278				80
1417-1279				100
1417-1280	Thread rolling roller M24x1	93,976	45	40
1417-1281				50
1417-1282				63
1417-1283				80
1417-1284		140,676	54	40
1417-1285				50
1417-1286				63
1417-1287				80
1417-1288			63	40
1417-1289				50
1417-1290				63
1417-1291				80
1417-1292		187,376	80	40
1417-1293				50
1417-1294				63
1417-1295				80
1417-1296			100	40
1417-1297				50
1417-1298				63
1417-1299				80
1417-1300	Thread rolling roller M24x1.5	92,968	45	50
1417-1301				63
1417-1302				80
1417-1303				100
1417-1304		139,02	54	50
1417-1305				63
1417-1306				80
1417-1307				100
1417-1308			63	50
1417-1309				63
1417-1310				80
1417-1311				100
1417-1312		185,072	80	50
1417-1313				63
1417-1314				80
1417-1315				100
1417-1316			100	50
1417-1317				63
1417-1318				80
1417-1319				100
1417-1320	Thread rolling roller M24x2	91,956	45	50
1417-1321				63
1417-1322				80
1417-1323				100
1417-1324		137,358	54	50
1417-1325				63
1417-1326				80
1417-1327				100
1417-1328			63	50
1417-1329				63
1417-1330				80
1417-1331				100
1417-1332		205,461	80	50
1417-1333				63
1417-1334				80
1417-1335				100
1417-1336			100	50
1417-1337				63
1417-1338				80
1417-1339				100
1417-1340	Thread rolling roller M24x3	89,932	45	50
1417-1341				63
1417-1342				80
1417-1343				100
1417-1344		134,034	54	50
1417-1345				63
1417-1346				80
1417-1347				100
1417-1348			63	50
1417-1349				63
1417-1350				80
1417-1351				100
1417-1352		200,187	80	50
1417-1353				63
1417-1354				80
1417-1355				100
1417-1356			100	50
1417-1357				63
1417-1358				80
1417-1359				100
1417-1360	Thread rolling roller M25x1	97,976	45	40
1417-1361				50
1417-1362				63
1417-1363				80
1417-1364		146,676	54	40
1417-1365				50
1417-1366				63
1417-1367				80
1417-1368			63	40
1417-1369				50
1417-1370				63
1417-1371				80
1417-1372		195,376	80	40
1417-1373				50
1417-1374				63
1417-1375				80
1417-1376			100	40
1417-1377				50
1417-1378				63
1417-1379				80
1417-1380	Thread rolling roller M25x1.5	96,968	45	50
1417-1381				63
1417-1382				80
1417-1383				100
1417-1384		145,02	54	50
1417-1385				63
1417-1386				80
1417-1387				100
1417-1388			63	50
1417-1389				63
1417-1390				80
1417-1391				100
1417-1392		193,072	80	50
1417-1393				63
1417-1394				80
1417-1395				100
1417-1396			100	50
1417-1397				63
1417-1398				80
1417-1399				100
1417-1400	Thread rolling roller M25x2	95,956	45	50
1417-1401				63
1417-1402				80
1417-1403				100
1417-1404		143,358	54	50
1417-1405				63
1417-1406				80
1417-1407				100
1417-1408			63	50
1417-1409				63
1417-1410				80
1417-1411				100
1417-1412		190,76	80	50
1417-1413				63
1417-1414				80
1417-1415				100
1417-1416			100	50
1417-1417				63
1417-1418				80
1417-1419				100
1417-1420	Thread rolling roller M26x1.5	100,968	45	50
1417-1421				63
1417-1422				80
1417-1423				100
1417-1424		125,994	54	50
1417-1425				63
1417-1426				80
1417-1427				100
1417-1428			63	50
1417-1429				63
1417-1430				80
1417-1431				100
1417-1432		201,072	80	50
1417-1433				63
1417-1434				80
1417-1435				100
1417-1436			100	50
1417-1437				63
1417-1438				80
1417-1439				100
1417-1440	Thread rolling roller M27x1	105,976	45	40
1417-1441				50
1417-1442				63
1417-1443				80
1417-1444		132,326	54	40
1417-1445				50
1417-1446				63
1417-1447				80
1417-1448			63	40
1417-1449				50
1417-1450				63
1417-1451				80
1417-1452		185,026	80	40
1417-1453				50
1417-1454				63
1417-1455				80
1417-1456			100	40
1417-1457				50
1417-1458				63
1417-1459				80
1417-1460	Thread rolling roller M27x1.5	104,968	45	50
1417-1461				63
1417-1462				80
1417-1463				100
1417-1464		130,994	54	50
1417-1465				63
1417-1466				80
1417-1467				100
1417-1468			63	50
1417-1469				63
1417-1470				80
1417-1471				100
1417-1472		183,046	80	50
1417-1473				63
1417-1474				80
1417-1475				100
1417-1476			100	50
1417-1477				63
1417-1478				80
1417-1479				100
1417-1480	Thread rolling roller M27x2	103,956	45	50
1417-1481				63
1417-1482				80
1417-1483				100
1417-1484		129,657	54	50
1417-1485				63
1417-1486				80
1417-1487				100
1417-1488			63	50
1417-1489				63
1417-1490				80
1417-1491				100
1417-1492		206,76	80	50
1417-1493				63
1417-1494				80
1417-1495				100
1417-1496			100	50
1417-1497				63
1417-1498				80
1417-1499				100
1417-1500	Thread rolling roller M27x3	101,932	45	50
1417-1501				63
1417-1502				80
1417-1503				100
1417-1504		126,983	54	50
1417-1505				63
1417-1506				80
1417-1507				100
1417-1508			63	50
1417-1509				63
1417-1510				80
1417-1511				100
1417-1512		202,136	80	50
1417-1513				63
1417-1514				80
1417-1515				100
1417-1516			100	50
1417-1517				63
1417-1518				80
1417-1519				100
1417-1520	Thread rolling roller M28x1.5	81,942	45	50
1417-1521				63
1417-1522				80
1417-1523				100
1417-1524		135,994	54	50
1417-1525				63
1417-1526				80
1417-1527				100
1417-1528			63	50
1417-1529				63
1417-1530				80
1417-1531				100
1417-1532		190,046	80	50
1417-1533				63
1417-1534				80
1417-1535				100
1417-1536			100	50
1417-1537				63
1417-1538				80
1417-1539				100
1417-1540	Thread rolling roller M28x2	81,255	45	50
1417-1541				63
1417-1542				80
1417-1543				100
1417-1544		134,657	54	50
1417-1545				63
1417-1546				80
1417-1547				100
1417-1548			63	50
1417-1549				63
1417-1550				80
1417-1551				100
1417-1552		188,059	80	50
1417-1553				63
1417-1554				80
1417-1555				100
1417-1556			100	50
1417-1557				63
1417-1558				80
1417-1559				100
1417-1560	Thread rolling roller M30x1	88,626	45	40
1417-1561				50
1417-1562				63
1417-1563				80
1417-1564		147,326	54	40
1417-1565				50
1417-1566				63
1417-1567				80
1417-1568			63	40
1417-1569				50
1417-1570				63
1417-1571				80
1417-1572		206,026	80	40
1417-1573				50
1417-1574				63
1417-1575				80
1417-1576			100	40
1417-1577				50
1417-1578				63
1417-1579				80
1417-1580	Thread rolling roller M30x1.5	87,942	45	50
1417-1581				63
1417-1582				80
1417-1583				100
1417-1584		145,994	54	50
1417-1585				63
1417-1586				80
1417-1587				100
1417-1588			63	50
1417-1589				63
1417-1590				80
1417-1591				100
1417-1592		204,046	80	50
1417-1593				63
1417-1594				80
1417-1595				100
1417-1596			100	50
1417-1597				63
1417-1598				80
1417-1599				100
1417-1600	Thread rolling roller M30x2	87,255	45	50
1417-1601				63
1417-1602				80
1417-1603				100
1417-1604		144,657	54	50
1417-1605				63
1417-1606				80
1417-1607				100
1417-1608			63	50
1417-1609				63
1417-1610				83
1417-1611				100
1417-1612		202,059	80	50
1417-1613				63
1417-1614				80
1417-1615				100
1417-1616		202,059	100	50
1417-1617				63
1417-1618				80
1417-1619				100
1417-1620	Thread rolling roller M30x3.5	85,197	45	50
1417-1621				63
1417-1622				80
1417-1623				100
1417-1624		140,651	54	50
1417-1625				63
1417-1626				80
1417-1627				100
1417-1628			63	50
1417-1629				63
1417-1630				80
1417-1631				100
1417-1632		196,105	80	50
1417-1633				63
1417-1634				80
1417-1635				100
1417-1636			100	50
1417-1637				63
1417-1638				80
1417-1639				100
1417-1640	Thread rolling roller M32x1.5	93,942	45	50
1417-1641				63
1417-1642				80
1417-1643				100
1417-1644		124,968	54	50
1417-1645				63
1417-1646				80
1417-1647				100
1417-1648			63	50
1417-1649				63
1417-1650				80
1417-1651				100
1417-1652		187,02	80	50
1417-1653				63
1417-1654				80
1417-1655				100
1417-1656			100	50
1417-1657				63
1417-1658				80
1417-1659				100
1417-1660	Thread rolling roller M32x2	93,255	45	50
1417-1661				63
1417-1662				80
1417-1663				100
1417-1664		123,956	54	50
1417-1665				63
1417-1666				80
1417-1667				100
1417-1668			63	50
1417-1669				63
1417-1670				80
1417-1671				100
1417-1672		185,358	80	50
1417-1673				63
1417-1674				80
1417-1675				100
1417-1676			100	50
1417-1677				63
1417-1678				80
1417-1679				100
1417-1680	Thread rolling roller M33x1.5	96,942	45	50
1417-1681				63
1417-1682				80
1417-1683				100
1417-1684		128,968	54	50
1417-1685				63
1417-1686				80
1417-1687				100
1417-1688			63	50
1417-1689				63
1417-1690				80
1417-1691				100
1417-1692		193,02	80	50
1417-1693				63
1417-1694				80
1417-1695				100
1417-1696			100	50
1417-1697				63
1417-1698				80
1417-1699				100
1417-1700	Thread rolling roller M33x2	96,255	45	50
1417-1701				63
1417-1702				80
1417-1703				100
1417-1704		127,956	54	50
1417-1705				63
1417-1706				80
1417-1707				100
1417-1708			63	50
1417-1709				63
1417-1710				80
1417-1711				100
1417-1712		191,358	80	50
1417-1713				63
1417-1714				80
1417-1715				100
1417-1716			100	50
1417-1717				63
1417-1718				80
1417-1719				100
1417-1720	Thread rolling roller M33x3.5	94,197	45	50
1417-1721				63
1417-1722				80
1417-1723				100
1417-1724		124,924	54	50
1417-1725				63
1417-1726				80
1417-1727				100
1417-1728			63	50
1417-1729				63
1417-1730				80
1417-1731				100
1417-1732		186,378	80	50
1417-1733				63
1417-1734				80
1417-1735				100
1417-1736			100	50
1417-1737				63
1417-1738				80
1417-1739				100
1417-1740	Thread rolling roller M35x1.5	102,942	45	50
1417-1741				63
1417-1742				80
1417-1743				100
1417-1744		136,968	54	50
1417-1745				63
1417-1746				80
1417-1747				100
1417-1748			63	50
1417-1749				63
1417-1750				80
1417-1751				100
1417-1752		205,02	80	50
1417-1753				63
1417-1754				80
1417-1755				100
1417-1756			100	50
1417-1757				63
1417-1758				80
1417-1759				100
1417-1760	Thread rolling roller M36x1.5	105,942	45	50
1417-1761				63
1417-1762				80
1417-1763				100
1417-1764		140,968	54	50
1417-1765				63
1417-1766				80
1417-1767				100
1417-1768			63	50
1417-1769				63
1417-1770				80
1417-1771				100
1417-1772		175,994	80	50
1417-1773				63
1417-1774				80
1417-1775				100
1417-1776			100	50
1417-1777				63
1417-1778				80
1417-1779				100
1417-1780	Thread rolling roller M36x2	105,255	45	50
1417-1781				63
1417-1782				80
1417-1783				100
1417-1784		139,956	54	50
1417-1785				63
1417-1786				80
1417-1787				100
1417-1788			63	50
1417-1789				63
1417-1790				80
1417-1791				100
1417-1792		174,657	80	50
1417-1793				63
1417-1794				80
1417-1795				100
1417-1796			100	50
1417-1797				63
1417-1798				80
1417-1799				100
1417-1800	Thread rolling roller M36x3	69,83	45	50
1417-1801				63
1417-1802				80
1417-1803				100
1417-1804		137,932	54	50
1417-1805				63
1417-1806				80
1417-1807				100
1417-1808			63	50
1417-1809				63
1417-1810				80
1417-1811				100
1417-1812		171,983	80	50
1417-1813				63
1417-1814				80
1417-1815				100
1417-1816			100	50
1417-1817				63
1417-1818				80
1417-1819				100
1417-1820	Thread rolling roller M36x4	102,51	45	50
1417-1821				63
1417-1822				80
1417-1823				100
1417-1824		135,912	54	50
1417-1825				63
1417-1826				80
1417-1827				100
1417-1828			63	50
1417-1829				63
1417-1830				80
1417-1831				100
1417-1832		202,716	80	50
1417-1833				63
1417-1834				80
1417-1835				100
1417-1836			100	50
1417-1837				63
1417-1838				80
1417-1839				100
1417-1840	Thread rolling roller M39x1.5	152,968	54	50
1417-1841				63
1417-1842				80
1417-1843				100
1417-1844			63	50
1417-1845				63
1417-1846				80
1417-1847				100
1417-1848	Thread rolling roller M39x2	76,554	45	50
1417-1849				63
1417-1850				80
1417-1851				100
1417-1852		151,956	54	50
1417-1853				63
1417-1854				80
1417-1855				100
1417-1856			63	50
1417-1857				63
1417-1858				80
1417-1859				100
1417-1860		189,657	80	50
1417-1861				63
1417-1862				80
1417-1863				100
1417-1864			100	50
1417-1865				63
1417-1866				80
1417-1867				100
1417-1868	Thread rolling roller M39x3	75,83	45	50
1417-1869				63
1417-1870				80
1417-1871				100
1417-1872		149,932	54	50
1417-1873				63
1417-1874				80
1417-1875				100
1417-1876			63	30
1417-1877				63
1417-1878				80
1417-1879				100
1417-1880		186,983	80	45
1417-1881				63
1417-1882				80
1417-1883				100
1417-1884			100	50
1417-1885				63
1417-1886				80
1417-1887				100
1417-1888	Thread rolling roller M39x4	75,108	45	50
1417-1889				63
1417-1890				80
1417-1891				100
1417-1892		147,912	54	50
1417-1893				63
1417-1894				80
1417-1895				100
1417-1896			63	50
1417-1897				63
1417-1898				80
1417-1899				100
1417-1900		184,314	80	50
1417-1901				63
1417-1902				80
1417-1903				100
1417-1904			100	50
1417-1905				63
1417-1906				80
1417-1907				100
1417-1908	Thread rolling roller M40x2	78,554	45	50
1417-1909				63
1417-1910				80
1417-1911				100
1417-1912		117,255	54	50
1417-1913				63
1417-1914				80
1417-1915				100
1417-1916			63	50
1417-1917				63
1417-1918				80
1417-1919				100
1417-1920		194,657	80	50
1417-1921				63
1417-1922				80
1417-1923				100
1417-1924			100	50
1417-1925				63
1417-1926				80
1417-1927				100
1417-1928	Thread rolling roller M40x3	191,983	80	50
1417-1929				63
1417-1930				80
1417-1931				100
1417-1932			100	50
1417-1933				63
1417-1934				80
1417-1935				100
1417-1936	Thread rolling roller M42x2	82,554	45	50
1417-1937				63
1417-1938				80
1417-1939				100
1417-1940		123,255	54	50
1417-1941				63
1417-1942				80
1417-1943				100
1417-1944			63	50
1417-1945				63
1417-1946				80
1417-1947				100
1417-1948		204,657	80	50
1417-1949				63
1417-1950				80
1417-1951				100
1417-1952			100	50
1417-1953				63
1417-1954				80
1417-1955				100
1417-1956	Thread rolling roller M42x3	201,983	80	50
1417-1957				63
1417-1958				80
1417-1959				100
1417-1960			100	50
1417-1961				63
1417-1962				80
1417-1963				100
1417-1964	Thread rolling roller M42x4	199,314	80	50
1417-1965				63
1417-1966				80
1417-1967				100
1417-1968			100	50
1417-1969				63
1417-1970				80
1417-1971				100
1417-1972	Thread rolling roller M42x4.5	119,823	80	63
1417-1973				80
1417-1974				100
1417-1975				125
1417-1976		158,9	100	63
1417-1977				80
1417-1978				100
1417-1979				125
1417-1980	Thread rolling roller M45x2	88,554	45	50
1417-1981				63
1417-1982				80
1417-1983				100
1417-1984		132,255	54	50
1417-1985				63
1417-1986				80
1417-1987				100
1417-1988			63	50
1417-1989				63
1417-1990				80
1417-1991				100
1417-1992		175,956	80	50
1417-1993				63
1417-1994				80
1417-1995				100
1417-1996			100	50
1417-1997				63
1417-1998				80
1417-1999				100
1417-2000	Thread rolling roller M45x3	173,932	80	50
1417-2001				63
1417-2002				80
1417-2003				100
1417-2004			100	50
1417-2005				63
1417-2006				80
1417-2007				100
1417-2008	Thread rolling roller M45x4	171,912	80	50
1417-2009				63
1417-2010				80
1417-2011				100
1417-2012			100	50
1417-2013				63
1417-2014				80
1417-2015				100
1417-2016	Thread rolling roller M45x4.5	128,823	80	63
1417-2017				80
1417-2018				100
1417-2019				125
1417-2020		170,9	100	63
1417-2021				80
1417-2022				100
1417-2023				125
1417-2024	Thread rolling roller M48x2	187,956	80	50
1417-2025				63
1417-2026				80
1417-2027				100
1417-2028			100	50
1417-2029				63
1417-2030				80
1417-2031				100
1417-2032	Thread rolling roller M48x3	185,932	80	50
1417-2033				63
1417-2034				80
1417-2035				100
1417-2036			100	50
1417-2037				63
1417-2038				80
1417-2039				100
1417-2040	Thread rolling roller M48x4	183,912	80	50
1417-2041				63
1417-2042				80
1417-2043				100
1417-2044			100	50
1417-2045				63
1417-2046				80
1417-2047				100
1417-2048	Thread rolling roller M48x5	181,888	80	63
1417-2049				80
1417-2050				100
1417-2051				125
1417-2052			100	63
1417-2053				80
1417-2054				100
1417-2055				125
1417-2056	Thread rolling roller M52x2	203,956	80	50
1417-2057				63
1417-2058				80
1417-2059				100
1417-2060			100	50
1417-2061				63
1417-2062				80
1417-2063				100
1417-2064	Thread rolling roller M52x3	201,932	80	50
1417-2065				63
1417-2066				80
1417-2067				100
1417-2068			100	50
1417-2069				63
1417-2070				80
1417-2071				100
1417-2072	Thread rolling roller M52x4	199,912	80	50
1417-2073				63
1417-2074				80
1417-2075				100
1417-2076			100	50
1417-2077				63
1417-2078				80
1417-2079				100
1417-2080	Thread rolling roller M52x5	197,888	80	63
1417-2081				80
1417-2082				100
1417-2083				125
1417-2084			100	63
1417-2085				80
1417-2086				100
1417-2087				125
1417-2088	Thread rolling roller M64x6	183,765	80	63
1417-2089				80
1417-2090				100
1417-2091				125
1417-2092			100	63
1417-2093				80
1417-2094				100
1417-2095				125
1417-2096	Thread rolling roller M68x6	195,765	80	63
1417-2097				80
1417-2098				100
1417-2099				125
1417-2100			100	63
1417-2101				80
1417-2102				100
1417-2103				125

For questions regarding purchasing products, please contact the sales department by phone +7 (351) 734-96-34 or by email

Thread rolling heads VNGN for metric and trapezoidal threads, assembled with a set of rollers

We offer VNGN thread rolling heads and rollers for rolling metric and trapezoidal threads, VNGT thread rolling heads and rollers for rolling pipe threads, NP dies and rollers for rolling metric threads, NPT dies and rollers for rolling pipe threads

We will also purchase new rollers and heads from storage that we require above.

Designation	Rolled thread size (mm)		Direction of rolled thread	Outer diameter (mm.)	Bore diameter (mm.)	Price, rub.)
	diameter	step
VNGN-2M	4-7	0,7-1	Right	57	20	55500
VNGN-3M	8-16	0,75-2	Right	90	32	63100
VNGN-3M lion.			Left
VNGN-4M	16-27	1-3	Right	145	48	118000
VNGN-4M lion.			Left
VNGN-5AM	30-52	1,5-3	Right	200	80	136500
VNGN-5AM lion.			Left
VNGN-5BM		3-5	Right
VNGN-5BM lion.			Left
VNGN-trap.1M	22-24	5	Right	230		136500
VNGN-ladder.1M left.			Left
VNGN-trap.2M	26-34	5; 6	Right			136500
VNGN-ladder.2M left.			Left
VNGN-trap.3M	36-42	6	Right
VNGN-ladder.3M left.			Left
VNGN-trap.4M	16-20	4	Right	160	48	136500
VNGN-ladder.4M left.			Left

Designation	Rolled thread sizes		Applicability	Outer diameter (mm.)	Landing diameter (mm.)	Width (mm.)	Price per set (RUB)
Designation	diameter (mm.)	pitch (mm.)	Applicability	Outer diameter (mm.)	Landing diameter (mm.)	Width (mm.)	Price per set (RUB)
4 x 0.7	4	0,7	VNGN-2M	18,3	11,5	10
5 x 0.7	5	0,80		19,5
6 x 1.0; 7 x 1.0	6; 7	1,00		18,4
8 - 11 x 0.75	8-11	0,75	VNGN-3M, VNGN-3M lion.	40,5	22	18
12 - 16 x 0.75	12-16	0,75		36,3
8 - 12 x 1.0	8-12	1,00		40,3
14 - 16 x 1.0	14-16	1,00		36,1
8 - 12 x 1.25	8-12	1,25		40,6
10 - 12 x 1.5	10-12	1,50		41,0
14 - 16 x 1.5	14-16	1,50		36,0
12 x 1.75	12	1,75		40,0
14 - 16 x 2.0	14-16	2,00		37,0
16 - 22 x 1.0	16-22	1,00	VNGN-4M, VNGN-4M lion.	69,6	34	25
18 - 22 x 1.5	18-22	1,50		69,8
24 - 27 x 1.5	24-27	1,50		63,0
16 - 22 x 2.0	16-22	2,00		71,3
24 - 27 x 2.0	24-27	2,00		64,8
18 - 22 x 2.5	18-22	2,50		69,9
24 - 27 x 3.0	24-27	3,00		64,6
30 - 33 x 1.5	30-33	1,50	VNGN-5AM, VNGN-5AM lion.	93,1	45	40
36 - 39 x 1.5	36-39	1,50		89,1
30 - 33 x 2.0	30-33	2,00		94,0
36 - 39 x 3.0	36-39	3,00		89,2
42 - 45 x 3.0	42-45			83,2
48 - 52 x 3.0	48-52			77,2
36 - 39 x 3.0	36-39	3,00	VNGN-5BM, VNGN-5BM lion.	89,2
30 - 33 x 3.5	30-33	3,50		96,0
36 - 39 x 4.0	36-39	4,00		90,5
42 - 45 x 4.5	42-45	4,50		85,1
48 - 52 x 5.0	48-52	5,00		80,0
22 - 24 x 5.0	22-24	5,00	VNGN-ladder.1M, VNGN-ladder.1M left.	87,6
26 - 28 x 5.0	26-28	5,00	VNGN-ladder.2M, VNGN-ladder.2M left.	101,0
30 - 34 x 6.0	30-34	6,00	VNGN-ladder.2M, VNGN-ladder.2M left.	99,6
36 - 38 x 6.0	36-38	6,00	VNGN-ladder.3M, VNGN-ladder.3M left.	93,6
40 - 42 x 6.0	40-42	6,00	VNGN-ladder.3M, VNGN-ladder.3M left.	89,7
16 - 22 x 4.0	16-22	4,00	VNGN-ladder.4M, VNGN-ladder.4M left.	68,2	35	34

Designation	Rolled thread		Outer diameter (mm.)	Bore diameter (mm.)	Price, rub.)
	Designation	Pitch (mm.)
VNGT 1/2-3/4	G 1/2-G 3/4	1,814	150	60	139000
VNGT 1	G 1	2,309			144000
VNGT 1 1/2-1 1/4	G 1 1/2-G 1 1/4		170	80	144000
VNGT 2	G 2				150000

Roller designation	Rolled thread sizes		Applicability	Outer diameter (mm.)	Bore diameter (mm.)	Width (mm.)	Number of rollers included	Price per set (RUB)
	thread designation	pitch (mm.)
GT 1/2″	G 1/2	1,814	VNGT 1/2-3/4	40,0	22	16	4	8500
GT 3/4″	G 3/4			36,0
GT 1″	G 1	2,309	VNGT 1	29,0	16		6	9500
GT 1 1/4″	G 1 1/4		VNGT 1 1/2-1 1/4	37,5	22
GT 1 1/2″	G 1 1/2			32,0
GT 2″	G 2		VNGT 2	34,0	20

Designation	Rolled thread dimensions (mm)		Outer diameter (mm.)	Price, rub.)
	diameter	step
NP-1	4-7	0,5-1,0	38
NP-2	12-16	0,75-2,0	75
NP-3	18-24	1,5-2,0	90
NP-4	27-33

Designation	Rolled thread dimensions (mm)		Applicability	Outer diameter (mm.)	Bore diameter (mm.)	Width (mm.)	Number of rollers included	Price per set (RUB)
	diameter	step
4-7	0,50	NP-1	18,7	11,5	6	3
4	0,70		18,4
4-7	0,75		18,8
5	0,80		19,6
6; 7	1,00		18,9
12	0,75	NP-2	37	22	10
8-12	1,00		38,9
14-16	1,00		35,9
8-12	1,25		38,9
10-16	1,50		37,5
12	1,75		36,4
14-16	2,00		37,1
18-22	1,50	NP-3	37,5
18-24	2,00		38,7
27-33	1,50	NP-4	39,6			4
	2,00		40,1

Die designation	Rolled thread sizes		Outer diameter (mm.)	Price, rub.)
Die designation	thread designation	pitch (mm.)	Outer diameter (mm.)	Price, rub.)
NPT 1/2-3/4	G 1/2 - G 3/4	1,814	90
NPT 1	G1	2,309	85
NPT 1 1/4 - 1 1/2	G 1 1/4 - G 1 1/2		105
NPT 2	G 2		120

Roller designation	Rolled thread sizes		Applicability	Outer diameter (mm.)	Bore diameter (mm.)	Width (mm.)	Number of rollers included	Price per set (RUB)
	thread designation	pitch (mm.)
G 1/2	1,814	NPT 1/2-3/4	40	22	16	4
G 3/4
G 1	2,309	NPT 1	29,0	16		6
G 1 1/4		NPT 1 1/4 - 1 1/2	36,6	22
G 1 1/2
G 2		NPT 2	34	20

Thread-rolling, thread-cutting heads and special fasteners-Frezerprom

Our company supplies thread-rolling and thread-cutting tools, assembly of fasteners for general machine-building purposes in accordance with GOST, DIN, ISO, production of special fasteners, production of fasteners in accordance with OST, production of fasteners and parts according to customer drawings.

Complete set of fasteners according to the Customer’s request, production

custom-made fasteners
according to the Customer's drawings with specified requirements :
Hex head bolts , hinged bolts, half-round screws , cylindrical and countersunk head screws , captive screws , set screws, hex nuts, hexagonal castle and slotted nuts, round nuts with slot at the end, slotted nuts, threaded bushings : crimped, flared, hexagonal, screwed, pressed, stands for printed circuit boards - mounting , pressed studs pressed threaded stands , flat washers, lock washers with claws and teeth, multi-claw washers, self-tapping screws, retaining rings , rivets, cylindrical pins and other fasteners and hardware according to GOST, OST, DIN, ISO.

30KhGSA fasteners from M 1.6 to M10 and high-strength fasteners from M 1.6 to M10 made of 30KhGSA steel,

Production of fasteners and hardware from stainless steel according to the Customer’s request,

At the Customer’s request, we will complete the assembly of fasteners and hardware and supply special fasteners within the agreed time frame

and details according to the Customer's drawings.

Applications for the manufacture of custom-made fasteners are accepted by e-mail or fax specified in Contacts

We have the technical ability to supply fasteners with external metric threads from M 1.4 .

Examples in the Photo Gallery:

set screw, M1.4x4.LS59, drawing

cylindrical head screw, M1.4-6gx3, steel 14Х17Н2, GOST 1491-80

screw M1.6x5 with a semicircular head, steel 20Х13, GOST 17473-80

In the Photo Gallery you can see fasteners and tools; for a quick search, enter the items of interest in SEARCH.

Materials:

Carbon, high-alloy heat-resistant and heat-resistant steel grades: 40Х, 09Г2С, 40Х, 20Х13, 20ХН3А, 30ХГСА, 25Х1МФ, 20ХН3А, 14Х17Н2 , 12Х18Н10Т , 36НХТУ, 10Х11Н23Т3МР…,

Alloys: aluminum, copper and alloys.

Thread forming tool

Thread rolling tool:

VNGN thread-rolling heads and replaceable thread-rollers for them for rolling external metric threads with thread ratings from M8 to M52 with a thread pitch from 1mm to 5mm.

Pipe thread-rolling heads VNGT and replaceable thread-rollers for them for rolling external cylindrical pipe threads from 1/2″ to 2″

Thread-rolling heads VNGN-trap and replaceable thread-rollers for them for rolling external trapezoidal threads with thread ratings from M 16 to M 42.

Thread rolling dies NP and NPT and replaceable rollers for them for rolling external metric and external cylindrical pipe threads.

Threading tool:

screw-cutting heads (type 1KA-5KA) and non-rotating screw-cutting heads (type 1K-5K) for cutting external metric threads with nominal values from M 4 to M 60 with a thread pitch from 1.5 to 4.0 mm

round dies for screw cutting heads;

jaws for screw cutting heads;

sprockets and screws for screw-cutting heads;

devices for sharpening and measuring round combs.

Cutters:

— worm finishing single-throw for cylindrical gears with an involute profile — GOST 9324-80 — worm for splined shafts — GOST 6637-80 — worm for cutting sprocket teeth — GOST 15127-83 — worm for splined shafts — GOST 8027-86

* Drills from Ф
6 mm to Ф 80 mm , Grinding of batches of drills according to SIZE. * Machine thread rollers GOST 9539-72. * Internal grinding heads VShG, TU 2-024-4716-87 .
We offer mutually beneficial cooperation!

Contacts