5 types of electrodes for pipe welding: list

Welding electrodes are a mandatory consumable material used during welding operations. Its essence lies in introducing additional (electrode) metal into the weld pool formed when the base metal melts in the weld zone. The result of this action will be a permanent connection capable of absorbing various types of loads and ensuring rigidity or tightness (in the case of pipe welding) of the structure.

Simple in words, in reality this process requires a fair amount of preparation, including in terms of selecting electrodes. It is not enough to select a consumable element with a metal whose properties are as close as possible to the main one. The market is gradually filled with competing products, so even professionals, let alone novice users, often fail to make the right choice in such an environment. After studying reviews from consumers and experts, we have prepared for you a rating of the best welding electrodes, divided into four main categories.

The best welding electrodes with basic coating

Electrodes with a basic coating are used quite often, since they do not impose strict restrictions on welding. The parts to be welded can be oriented in space at any angle - the electrode works in all spatial positions. In addition, not only thin metal products can be subjected to the process of obtaining a permanent connection - thick sheets of metal and thick-walled structures are also subject to welding with the main electrode. The only condition: these processes must take place at a constant current of reverse polarity.

Recommendations when choosing

There is no significant difference in the choice of electrodes for inverter and transformer type welding

First of all, to choose the best electrode for welding, you should pay attention to the deposition rate, packaging (be sure to make sure it is original), storage, consumption, and also check the quality certificate and manufacturer’s license

The deposition coefficient is determined by the ratio of the content of useful (pure) metal in the rod. Popular brands cannot always boast of high performance. If the transportation, period and place of storage of the rods are violated, the quality of the material deteriorates.

The best rutile coated welding electrodes

Rutile electrodes have gained great popularity among welders due to a combination of useful characteristics. They have easy ignition, are highly resistant to moisture, and can also be used on direct and alternating current. Their disadvantages include the impossibility of welding structures made of high-carbon steel, the direct dependence of the quality of the seam on the welding modes, as well as the need for careful preparatory operations (such as drying and calcination of the surface).

Suitable brands

When deciding which electrodes to choose for welding with an inverter, you can look at the statistics, which will show the most popular options. Among them are:

UONI-13 55 - they are more suitable for welders with experience. They serve to create a tight seam that is highly durable. They can be used even at low temperatures.

Electrodes for welding with inverter brand UONI-13 55

MP-3S - can become an indispensable solution in cases where high quality requirements are put forward for the seam. They are suitable for direct current with reverse polarity and for alternating current.

Electrodes for welding with MR-3S inverter

MP-3 is a universal brand, since the rod is suitable for most required operations. They can be used in any conditions, even if the metal surface is contaminated with something, including rust. They resist moisture well and protect the seam from hydrogen ingress.

Electrodes for welding with MP-3 inverter

ANO - the series consists of several brands, but overall it is the most popular in use. Their advantage is that the electrodes do not need to be pre-pierced. The arc ignites well both the first and subsequent times. The quality of the seam is quite high. Suitable for beginners.

Electrodes for welding with ANO brand inverter

Features of choosing an electrode for an inverter depending on the conditions of the metal being welded

When wondering how to choose electrodes for inverter welding, you should first find out what exactly you have to weld. When selecting consumables for steels, you should know their composition. A very important point here is the level of their alloying, what additional elements are included there and in what quantities. The fact is that if stainless steel is welded, then after the process itself, when the wrong choice is made, the stainless steel itself loses its anti-corrosion properties and rust may appear at the weld site over time. To prevent this from happening, it is necessary to select electrodes that will compensate for temperature losses.

Electrodes for welding stainless steel with an inverter

Similar schemes apply to steels with a high carbon content. If, on the contrary, the metal has a low level of carbon, then it is necessary to provide additional protection so that this element does not get into the seam, otherwise the entire connection will become quite fragile. To work with cast iron, you should use special consumables that are designed specifically for this metal, otherwise there is a high risk of defects.

Each metal has its own characteristics in the welding mode, due to the difference in melting point and fluidity properties. If the electrodes are selected from the same composition, then there should not be any big problems with the application, since it is enough to just set the specified parameters that are suitable for the desired position and start working. Thus, when considering which electrodes are best for an inverter, the above factors should be taken into account

Basic modes and nuances of application

Having chosen which electrodes are best for an inverter welding machine, you should familiarize yourself with the modes of their use. Here are the current parameters for all positions for the most common models:

MR-3S

ANO-21

MR-3

USENI-13 55

How to choose electrodes for inverter welding

When choosing these products, the most important thing is to decide what material you will have to work with.

That is, it is important to know what the products being welded are made of, and the electrode core must match them in composition

Thus, electrodes can be classified according to a number of characteristics:

• for low-carbon metals, carbon options are used;
• for cast iron;
• for strong heat-resistant steels;
• for high alloy metal;
• for working with aluminum or copper versions of products;
• for surfacing and repair work;
• universal options.

Electrodes for cast iron

Electrodes used for work must not be damaged

It is also important that they are dry. Special ovens are used to dry products.

Experienced specialists also take into account the conditions in which the work will be carried out. For example, humidity, ambient temperature, etc.

It is also important to consider the diameter of the selected electrode, the thickness of the parts and the current strength. It is important to understand that if the product is selected incorrectly, the current density can be reduced

As a result, the quality of welding will leave much to be desired, the seam will be thick and wide. Typically, electrode manufacturers immediately indicate for what current strength the product is best suited. For complex and massive structures, it is better to take thick electrodes, while profile products are welded in versions up to only 2 mm thick. We suggest estimating the approximate ratio of metal thickness and diameter using the figure below.

Ratio of workpiece thickness and electrode diameter

And here are the recommended current values ​​depending on the thickness of the product.

Relationship between electrode diameter and welding current

Disadvantages of inverters for manual welding

Like any technology, the inverter also has disadvantages. One of the most significant disadvantages is the presence of special requirements regarding the storage of the device. Proper storage conditions require, first of all, protecting it from dust, which can cause serious harm to the device.

It is precisely because of such requirements for storage conditions that manufacturing companies and construction organizations choose welding machines that are not so sensitive to the state of the external environment. Such devices, which include welding transformers and generators, can be safely left outdoors without worrying that this will seriously affect their technical characteristics. The disadvantage of inverters is their cost, which exceeds the price of welding transformers.

In addition, inverters require appropriate maintenance. In particular, to maintain devices in working condition, they must be thoroughly cleaned and purged after a long period of operation, which is not required by conventional welding transformers.

It is also important to start working on such a device correctly if it has just been brought in from the street. It is important to know that you can connect the inverter to the network and start working with it only 1.5–2 hours after moving it to a warm room

This requirement is due to the fact that condensation accumulates on the elements of the device, brought into the heat from the street, which can cause problems in its operation.