What it is?
Flame cutting of metal (go to service) is the cutting and cutting of a metal workpiece, sheet or pipe, using a plasma jet.
Plasma is the fourth state of matter. In ordinary life, we are faced with only three states, solid, liquid and gaseous, and from one to another a substance changes when it loses or gains heat: if you add heat to ice (solid), it will turn into water (liquid), and if to water , it will become a gas (gaseous). But if you add heat to the steam, it will begin to ionize and conduct electricity, turning into that same plasma.
A plasma cutter uses electrically conductive steam heated to temperatures of about 22,000°C to cut materials.
Easy to use
This advantage of plasma cutting is achieved due to the absence of the need to regulate the gas supply and control the chemical combustion reaction. The metal plasma cutting machine is designed for contact cutting of sheets, so when using it, there is no need to make efforts to maintain the distance between the cutter and the workpiece.
Optimized cutting parameters of automated plasma systems can be entered and controlled in one step, further simplifying equipment operation. With the ability to perform contact cutting and no need to adjust the gas supply, hand-held plasma cutting systems require less learning curve, meaning plant personnel can get to work faster.
How does plasma metal cutting work?
To be able to cut with plasma, you need an electric arc, which is formed between the electrode and the cutter nozzle as a result of a short circuit. Pressurized gas is supplied to the nozzle, which an electric arc converts into plasma at high speed and temperature. Due to the intensity of the plasma beam, it is capable of cutting even workpieces up to 100 mm thick.
Cooling is carried out by a flow of gas or cool liquid. Liquid cooling is used in high-power applications due to its greater efficiency, but air injectors are slightly more reliable.
Also, different gases are used for cutting different types of metal (go to service). Black ones are more often cut by active gases, which include oxygen and air, while non-ferrous and all kinds of alloys are cut by inactive gases: water vapor, argon, nitrogen, hydrogen.
Plasma torch operation process
After pressing the button, an electric current flows into the device and the primary electric arc with a temperature of about 8000 °C lights up inside and spreads over the entire area of the channel.
The compressor begins to supply compressed air into the channel with the primary arc, which, passing through the channel, heats up and acquires the properties of an ionized gas that conducts electric current. Due to high heating temperatures, air expands in volume by 50-100 times. This significantly increases gas pressure.
Then, through the channel, the hot, expanded gas flow enters the nozzle, which narrows it and makes it more concentrated. The air flow, converted into plasma, flies out of the nozzle opening at enormous speed (about 3 km/s). In this case, the temperature of the ionized flow increases several times.
It is this ionized gas, heated to enormous temperatures, that is the plasma through which cutting is carried out.
Types of plasma cutting of metal
The division occurs into traditional and high-precision:
- the traditional one is a system that uses ordinary air, the average electric arc current is about 12,000–20,000 amperes per square meter. inch. The size of the arc depends on the diameter of the nozzle. The traditional system can be found in manual and some mechanical instruments,
- high-precision cutters have a high current density and are used for precise plasma cutting of metal. The arc current can reach 40,000–50,000 amperes per square meter. inch, the gas used is not air from the room, but argon, oxygen, nitrogen, and also air that has undergone special preparation.
Automatic machines are machines for high-precision cutting, quite complex and expensive, but they produce clean, quick results and can cope with almost all workpieces of any thickness.
They separate plasma cutting of sheet metal (go to service) and plasma cutting of pipes (go to service):
- Plasma cutting of sheet metal involves cutting and separating sheet blanks of any thickness; various alloys, non-ferrous and ferrous metals, including stainless steel, can be processed. Plasma cutting provides smooth, clean edges without sagging or burrs, as well as the absence of deformation, including on thin sheets. That is why materials can be cut on a plasma machine without preliminary mechanical treatment,
- Plasma cutting of pipes is carried out on a pipe cutting machine with a special rotary table, which fixes the pipe and rotates it under a stream of plasma for a uniform, even and clean cut. Since the plasma jet has a high temperature, it is possible to cut pipes of any thickness, including refractory metals.
More details per unit of time
Due to the significant speed superiority of plasma cutting machines, such systems clearly outperform oxygen systems in terms of productivity, even without taking into account the time required for oxygen preheating and the secondary processing operations that would be required with this technology.
High productivity of plasma cutting is ensured not only due to the high speed of processing metals of different thicknesses and short burning time, but also due to the quick shutdown of the cutter.
Advantages and disadvantages of plasma metal cutting
Advantages of the technology:
- Relatively cheap for large quantities up to 60 mm thick. You can save money compared to oxygen cutting (go to service) by setting the settings correctly and ensuring a good efficiency-to-price ratio. However, for thicker metal it is better to use oxygen.
- Versatility - plasma works well on cast iron, steel, copper, aluminum and other types of metals; moreover, the products do not require preliminary cleaning; they can be cut over paint and rust. And there is no need to change equipment for processing other types of metals either.
- Precision, quality, neat edges. Often the cut does not need to be processed additionally, since it is obtained with a minimum width, with a minimum of burrs and sagging. This occurs due to the relatively small heating area of the metal during cutting.
- Eco-friendly and safe.
And its disadvantages:
- The limit on sheet thickness is up to 80–100 mm, while for oxygen cutting of metal the top reaches 500 mm.
- It is not possible to use two cutters connected to one machine.
- Mastering the technology of plasma cutting of metal requires preliminary training - this is a rather complex process both when processing materials manually and when using a machine.
DIY production and operating instructions
Due to the wide production capabilities of automatic plasma cutters, not only large workshops, but also garage workshops are interested in them. Professional equipment is quite expensive, so private craftsmen may have the idea of assembling the device themselves. Schemes can be easily found on the Internet, but the main difficulty in their implementation is connecting the automatic system. To do this, you need not only to be able to correctly connect the elements of a plasma cutter, but also to understand the basics of programming.
Gas flame welding - price in Moscow
- Excellent product quality
- Free measurement and estimate
- Maintaining a constant warehouse stock
- Minimum production time
- Error-free shipment guaranteed
- All products sold by the plant have quality certificates
- We are always on time
- All masters with more than 7 years of experience, Slavs
- Attention to details
- We meet deadlines
- A complex approach
- We are constantly developing
- We introduce new technologies into practice
- Open to dialogue
- Extensive experience in these areas
- Great quality
- Minimum terms
- Acceptable prices
- Standard or non-standard products
- Extensive staff experience
- We work under a contract
- We are always on time
- all masters with more than 7 years of experience are Slavs
- free measurement and estimate
- Free delivery is possible in Chelyabinsk and the region
- Free cost calculations based on drawings
- Category 1 technologist will finalize the drawings
- 8 years on the market, more than 300 works
- We work under a contract
- Free departure
- Efficiency of work
- Lending
- Flexible approach to each client
- Partner LLC is a reliable partner for your business!
- High quality of work performed.
- We will do everything to make you satisfied.
- Specialized direction
- Own staff
- Execution and delivery of government orders
- We do quality work
- Responsibility and mobility
- Our specialists are certified
- Fast and high-quality order fulfillment
- Affordable prices
- High-level specialists
- Always in stock
- Delivery
- Always in stock
- Full production cycle without intermediaries
- Work on individual projects
- more than 500 completed works
- Huge experience
- price
- honest
- Quality of work performed
- Competitive prices
- We always meet deadlines
- low prices
- minimum terms
- free delivery in Moscow
- responsibility
- check out 24 hours
- great experience
- We pay special attention to the quality of work.
- All masters with more than 6 years of experience are Slavs.
- Work according to the contract and on time.
- quality
- price
- deadlines
- Our engineers have 20 years of experience.
- Speed of construction work.
- We will provide the required quality of work and a guarantee.
- The price always meets your requirements.
- You will not be left without executive documentation.
- We will turn your idea into reality.
Plasma cutter structure
A plasma cutter is a device used to cut metal products in various ways. The unit structure includes the following elements:
- electrical power source;
- compressor;
- plasmatron;
- cable hoses.
Several devices act as power sources:
- inverter;
- transformer.
Improved Security
Plasma cutting systems use only compressed air, unlike oxy-fuel cutting, which uses a mixture of oxygen and fuel gas (acetylene, propane, propylene and natural gas). Among these compounds, acetylene is the most popular, providing a hotter flame and reducing burn time. However, acetylene is an unstable and flammable gas, sensitive even to static electricity, not to mention elevated pressure and temperature. In such conditions, working on oxygen cutting equipment can no longer be considered completely safe.
In conclusion, we suggest watching a video in which all the advantages of plasma cutting over oxygen are clearly illustrated and therefore become more understandable:
Increased flexibility
Plasma technology can be used to cut any metal that conducts current, including mild steel, aluminum, stainless steel, copper and most other types of metal. Unlike plasma, oxyfuel cutting technology involves a chemical reaction between oxygen and iron, so it is only used for cutting low-carbon (mild) steel.
The flexibility and versatility of plasma cutting has other aspects as well. Thus, this technology allows for manual cutting, cutting along a guide and using a pipe cutter, as well as cutting on a convenient coordinate table. In addition, plasma systems can be used for gouging, marking and cutting painted, rusty and even multi-layered metal, the sheets of which are superimposed on each other. Plasma makes it possible to perform both conventional cutting and bevel cutting of metal gratings, which is difficult to achieve using oxyfuel cutting.
Plasma welding technology
Plasma welding machines produced by various manufacturers are usually made to be universal. With their help, you can perform various works in all spatial positions: lower, ceiling, vertical, horizontal, inclined. The technological process of manufacturing structures consists of preparing the product for welding, selecting a filler material, if welding is performed with it, and preparing equipment.
Before welding, the part must be degreased, cleaned and carefully secured. During the welding process, the welder must protect his eyes from radiation, use all methods and means of protection to prevent thermal burns, and also use an exhaust ventilation system when welding indoors.
Today, in the trading network you can purchase various models of plasma welding devices, both domestic and foreign. Among domestic devices, mobile plasma devices “PLAZAR”, “GORYNYCH”, “MULTIPLAZ” and others are very popular.
For example, “GORYNYCH” represents a multifunctional portable device consisting of a plasma generator and a power supply and control unit. It is used for a wide range of welding, cutting and soldering of metals. It is powered by a 220 V network. Compact and easy to use, it is especially popular among welders. Depending on the type of work performed, it uses either distilled water or a solution of ethyl alcohol in the same water as the working fluid. Such a device is successfully used not only in production, construction, but also in everyday life.
Among foreign manufacturers, devices made in Germany and Italy attract special attention. Models of plasma welding and cutting machines from MERKLE Schweißanlagen-Technik GmbH are well known in different parts of the world. The company has been specializing in the production of equipment and components for welding operations for more than 50 years. Professional models of plasma devices P 421 DC-PT11, P 601 DC-PT11 and P 601 AC/DC-PT11 are used by well-known companies VOLKSWAGEN, MERCEDES-BENZ and others in the production of their products, which are known in many countries.
Manufacturer from Italy, Telwin company has been specializing in the production of modern devices for plasma welding for more than 50 years. Models Technica Plasma, Technology Plasma, Superplasma and others are equipped with overvoltage, low and high current protection, thermal protection, automatically cool the plasmatron and have a voltage alarm system in the torch. They are distinguished by their small dimensions, weight and are very convenient to use.
