Homemade machines - how to make useful devices

Machine tools and tools in finished form are available in a wide range in specialized stores. However, their price is not affordable for everyone, especially a novice master. Homemade machines are a way out of a situation with a limited budget. Let's consider the features of their use and manufacture. Let's talk about the most popular devices. The information will help you decide on the choice of necessary equipment for organizing work in the workshop.

Using a non-factory electric grinder Source notperfect.ru

Using homemade machines in the workshop

The work that is performed in the workshop affects the equipment of the room with special devices. Typically, equipment is placed if the free area is at least 3 m2.

Workshops are often set up in small rooms, outbuildings, and garages. The best place is a separate building. In this case, the noise from the work being performed will not disturb other residents of the house.

Universal workshops are often set up to perform various jobs. If a person is engaged in the production of any products, then specific homemade tools and devices are made. Often workshops are equipped with machines for carpentry and processing of metal blanks. Often, premises for the repair of wheeled vehicles are also set up.

Basically the workshop is equipped with:

• devices that allow you to prepare tools, facilitate labor and mechanize operations;
• homemade products for processing metal parts;
• workbenches.

A workbench made of wooden elements Source skilljob.ru
It is also necessary to install shelves in the room where various tools will be stored. At the same time, they ensure unhindered access to them and compliance with fire safety rules.

Home crafts

To make something interesting and useful with your own hands, you don’t have to spend a lot of time and effort on it. The main thing in this matter is desire. Even if you don’t know how to do something, you can always learn it!

Hand-made “little things” and useful ideas help to arrange the surrounding space in the house specifically to your taste: a room, a living room, a corridor, a kitchen, a bathroom and even a balcony - all of this can be made special and individual.

Interior details and furniture

On our website you will find ideas and advice from experts on how to make any house or apartment original. Moreover, in most cases, this does not require experience in construction and repair.

For example, we recommend paying attention to cool ideas and solutions for decorating wall surfaces. By making such decor, you can achieve amazing results. But here you need to experiment.

If you want to try your hand at making home furniture yourself, then on our website you will find a lot of interesting things for yourself: from how to glue tabletops and assemble shelves or cabinets, to more “delicate” works - for example, how to make your own use your hands to stick the plastic edge onto the furniture, or make a trash can out of a balloon.

And this is only a small part of what we can offer you! For those who constantly lose their keys in the house, we can offer to make an organizer with a magnetic key holder. And if you want to make a pleasant surprise for your wife, then you will probably be interested in a dressing table with lighting and a mirror.

Various useful things for the kitchen

Homemade products for the kitchen are designed not only to help in the cooking process, but can also decorate the interior of the room! We offer only the most daring solutions and ideas that will definitely interest you.

All devices and accessories differ in their level of complexity. While not everyone can make a hatchet for chopping bones from an old circular saw (this requires both experience and appropriate equipment), then to make, for example, a cutting table with a metal tray, a lot of experience is not required.

In the homemade kitchen section, we are pleased to present to your attention a powerful vegetable cutter made from an old gearbox, a rack for seedlings made from sections of PP pipe, or, for example, a magnetic holder for kitchen knives. In general, everyone will find something for themselves here.

Workbench for a carpenter

This type of equipment is a table. It is distinguished by its high strength and the presence of 2 vices on the tabletop. The table is also equipped with clamps that clamp the workpieces during planing. In addition, the workbench may still have places where other homemade devices, such as a router, will be attached.

A special table must have a comfortable height. She matches the height of the master. The minimum length of the workbench is 1000 mm. Often it is equal to 1700 mm or even 2000 mm. The standard width is 800 mm.

Before making a workbench for carpentry, get acquainted with its main parts Source infourok.ru

A workbench table is created as follows:

• The table surface is created - this is a shield, which is made from oak, beech or hornbeam boards with a minimum thickness of 55 mm. They are tightly fitted to each other. The boards used are impregnated with drying oil before joining. To create a rigid structure, a 50 mm block is used. It is fixed around the perimeter of the working surface.
• The supporting elements of the workbench are made. To do this, use linden or pine timber. Its size is 120*120 mm or 150*150 mm, and its length is approximately 1200 mm. The supports are connected by jumpers in the horizontal plane. To do this, take boards that are fixed at a distance of 300 mm from the floor.
• Make homemade devices to accommodate the tool. These are shelves located under the countertop. When they are open, they are often replaced with bedside tables.
• Attach a vice.

If a stationary workbench is created, its supporting elements are fixed to the floor. Depending on the specifics of the work being performed, mobile and collapsible tables are also manufactured.

Mobile workbench on wheels Source foamin.ru

Carpenter's workbench vice

This homemade tool is made using a screw rod. Its thread length must be at least 160 mm. In this case, the diameter of the rod itself must be 20 mm. For the vice you will also need wooden blocks and metal pins. The manufacturing sequence is as follows:

1. Prepare a block of 200*300 mm. Its minimum thickness should be 50 mm. This will be one of the sponges. A hole for a screw is drilled in the center of the workpiece. On the sides of it, two more holes are made for the studs.
2. A second movable jaw 200*180 mm is cut out and similar holes are drilled in it.
3. A threaded pin is inserted into the workpiece. A handle is installed at one end. To prevent the jaws from moving, pins with a cross section of 10 mm are passed through other holes.

Wooden vice for a carpenter Source infradom.ru

Homemade tool rocks the internet

This video shook up the community of invention lovers on the world wide web. The master thought about this idea for years and finally brought to the public discussion an idea that was ingenious in its simplicity and radically profitable for those who used to chisel walls with a hammer drill, realize their inclinations as a woodpecker and a brilliant builder-grinder, and now can make themselves rich for free, working in silence a workshop in a garage or even in a separate building.

And at the same time, you don’t have to spend money and take money saved for beer out of your stash. All this is free - the master loves to show the whole world the useful things he comes up with.

Metal workbench for a mechanic

All useful homemade products and devices simplify the processing of workpieces. Such devices include a workbench for a mechanic. Its minimum dimensions are:

• length – 1800 mm;
• width – 700 mm;
• height – 900 mm.

The table is created in the following sequence:

• frame assembly;
• installation of 2 cabinets, covered with metal;
• securing a working surface consisting of a wooden base in the form of a shield, on which a sheet of metal of a suitable size is placed on top;
• assembly and installation of a rack at the back of the workbench to strengthen the entire structure and accommodate tools.

When assembling a bench, use:

• beams as racks - four corrugated pipes 40*60 mm with a wall thickness of at least 2 mm;
• three beams 50*40 mm to connect the racks and ensure longitudinal rigidity of the structure;
• corrugated pipe 40*30 mm with a wall of at least 1 mm in the amount of 9 pieces to create the frame of the cabinets;
• metal corner 50*50 mm for the manufacture of shelving racks, the height of which will be a maximum of 2000 mm;
• board 50 mm thick for the tabletop panel;
• a sheet of metal no thinner than 6 mm to cover the top surface of the workbench.

Sheet metal Source glavmetall.com
See also: Catalog of construction companies that have their own production of materials and components for the construction of houses

Rocky paths

Convenient paths will increase the comfort of the area. Walking along stone paths in the rainy season, you won’t have to get your shoes dirty. It is not necessary to search the fields for natural stones or buy paving slabs. You can create elements of decorative masonry yourself.

Before starting experiments, it is better to watch a video of the process. The finished paths do not have to be left boring gray. Stones on paths can be painted in bright colors. This will add positivity and fun to the space.

Note!

• Weaving willow baskets: beautiful and unusual do-it-yourself baskets. Detailed diagram of willow weaving + photo examples of finished products

• DIY gazebo - the best design ideas. Description of construction stages with step-by-step instructions for beginners + 160 photos

• Capers - TOP-150 photos of types, best cooking recipes. Application options and beneficial properties + instructions on how to choose capers

If you use neon paint for coloring, you will be able to observe an unusual glow effect in the dark.

Wood lathe for lathe

There are various homemade machines and machines for the workshop. They all make the job easier. These include a lathe. Its structural elements are:

• Durable frame made of metal angle or pipe. Sometimes it is created from wooden blocks. The bed is fixed to the floor, and its lower part is weighted.
• A support, which is a supporting element for the cutters. This part of the machine must provide reliable fixation and allow the workpiece to move to the side. For this purpose, the design provides a screw rod.
• The clamping spindle, also called the headstock. The head of a powerful electric drill is often used as it.

The head of an electric drill is often used as a headstock. Source woodtoolsimg.ru

• Tailstock used for longitudinal movement of the workpiece. It is recommended to use the factory spindle, which has four cams.
• Electric drive providing rotation of 1500 rpm. Its power should be from 250 to 400 W. Often a washing machine motor is used as an electric motor. The design also includes a belt drive. This is a transmission, for the operation of which it is necessary to install pulleys on the shafts.

The electric motor of washing machines is often used as a drive for a lathe. Source dobro-teh.ru

Cutters for the machine

It is recommended to equip homemade devices with factory cutters. After all, they are sharpened with high quality using special equipment. As a last resort, for production use:

• old files without significant defects;
• steel square reinforcement is the optimal material for making cutters;
• square or rectangular spring from the car.

Subsequently, the existing workpieces are sharpened. Creates a semi-circular cutting edge for roughing wood parts. Finish turning work is carried out with a cutter that has a straight blade.

After sharpening, the cutting elements are hardened. During this process, the cutters are first heated and then placed in machine oil.

Wood boring tools for a lathe Source 24aul.ru

Homemade soldering iron stand with your own hands

Many offline and online stores sell good and quite convenient stands for soldering irons, and inexpensively. But if you wish, you can make them yourself. It will be cheaper, plus you can adapt the stand to your own needs.

There are a lot of ideas for making them, so we decided not to limit ourselves to just one, but to make a selection of the most interesting, in our opinion, homemade soldering iron stands, made with our own hands.

Stationary circulation saw

The stationary circular saw is placed on a sturdy table. Its working surface is usually made of metal sheet. It is reinforced with stiffening ribs. For their manufacture, a steel angle is used.

On the working surface there are usually:

• stops;
• guides;
• elements for adjustment;
• cutting disc.

On a note! The circular saw is powered by an electric motor. Its power should be approximately 800 W, and its rotation should be 1700 rpm. The electric motor of the angle grinder corresponds to these characteristics.

Angle grinder for a stationary circular saw Source tdrim.ru
Before making a device for sawing wooden parts, prepare a working angle grinder with the necessary characteristics. Further actions are performed in the following order:

1. Assembling the frame.
2. Prepare a worktop in which a slot is made for the cutting disc.
3. Two wooden blocks are fastened in parallel. They will be used as stops.
4. Set the scale necessary to control the cutting of wooden parts.
5. Clamps are installed so that workpieces and guides can be fixed.
6. The grinder is secured by first installing the disk into the previously created slot in the table top. The power tool is fixed from below the working surface.

Cyclone for carpentry workshop based on a vacuum cleaner

And at the end of the material, we offer our readers a photo selection of homemade cyclones, which are a necessary device for carpentry work.

Option 1

zalman3000 (FORUMHOUSE User):

My first cyclone failed and I decided to make a new one. It took 20 minutes to do everything. To make it, I took a used putty bucket and polyethylene pipe fittings. They hold better and tighten quickly, ensuring the tightness of the assembly.

An oil filter from Moskvich was used as a filter element.

This is what happened in the end.

Drilling machine

Interesting homemade products and devices often help craftsmen out when making various products in the workshop. One such device is a drilling machine. Its main parts include:

• electric drill;
• base made of metal parts with the ability to secure the workpiece;
• a stand for fixing an electric drill, which is created using chipboard with a thickness of 20 to 25 mm or an old photographic enlarger;
• a unit that supplies the drilling tool.

The drill press stand must have guide rails. They are necessary for the electric drill to move strictly in a vertical direction. There are different options for feeding an electric tool, but the most common design is a lever with a spring. It is manually controlled by simply pressing. The design of the machine also includes stops. They are needed to adjust the depth of the hole created in the part.

Homemade folding stand

2. A very original idea for a folding stand for hand tools. Everyone is in their place. It doesn't take up much space. The design is based on furniture guides. The clamp holds the stand in the upper position. Neodymium magnets prevent instruments from falling out of their stocks. A great idea for DIYers who love to do everything with their own hands.

CNC router

There are homemade machines and devices of complex design. Such devices include a CNC router. It is made for processing metal and wooden parts.

Work with a CNC router is carried out to a higher quality. This machine has advanced capabilities. When creating it, an LPT port is used, and numerical control is also provided. The copying unit is created from printer carriages with a matrix of needles.

The milling device is assembled as follows:

1. The tabletop is made using a plywood sheet. Instead, chipboard with a thickness of at least 15 mm is used.
2. A cutout is created to accommodate the cutter.
3. The milling unit is installed.
4. The electric drive is located.
5. The transmission is secured.
6. The spindle is mounted.
7. The stops are fixed.

The process of creating a wood router Source tmklazer.rf
A CNC milling machine for processing metal workpieces is made with a more durable frame. The device is created in the following sequence:

1. The column and frame are mounted when using a channel. From them a structure in the shape of the letter “P” is created. In it, the bridge between two supporting elements is formed by a part that is the base of the milling unit.
2. Guides are made from angle iron. They are fixed with bolts on the column.
3. Guide consoles are created from a pipe with a rectangular cross-section. To move them to a height of maximum 150 mm, the design provides a car jack.
4. A threaded pin is inserted into the console.
5. A working surface is created.
6. A vice, fixing elements and guides are installed.
7. The rotating unit is mounted. In this case, they strictly ensure that the shaft is in a vertical plane.

Variety and availability of materials

There is no need to throw old and used things into a landfill - they will make excellent homemade items that will certainly come in handy at home or in the country. Thus, you will not only give a second life to old things, but also save on the purchase of materials. For example, you can make a carpenter’s mallet from scraps of boards, or a fireplace for a cauldron from an old cylinder.

It should be noted that the issue of choosing materials for homemade products is always relevant. Each craftsman decides for himself what to make this or that homemade product from, but many agree that there is nothing wrong with using production waste or leftover materials after home renovations.

Our website contains original ideas for every taste: for those who want to save money and therefore use what is at hand, and for those who prefer to make something only from new (purchased) materials.

For example, to make a sliding interior door in a private house, you can use both old and new materials.

But you can make a dining table made of wood and profiles exclusively from scraps left over after a renovation or any project.

You can also make a lot of interesting things from leftover plastic or polypropylene pipes - for example, a convenient portable organizer for storing self-tapping screws and bolts with nuts.

You can also make a device for cutting sheet foil from PP and PVC pipes or make a stand for storing files.

Visit our website and invite your friends - there are enough ideas for everyone. Please note that homemade products are distributed in different sections and categories, but we recommend viewing the posts in the general feed, so you can find more interesting things for yourself.

We recommend crafts

1. Homemade machines for the home workshop
2. DIY hidden wiring detector
3. How to make a mini 3D hologram using a smartphone
4. How to make an oil filter puller: 4 ideas for the garage
5. DIY snail conductor for cold forging
6. How to make a third arm for soldering circuit boards and small parts
7. 5 simple ways to make a boiler from scrap materials
8. DIY wood crafts
9. What can be made from a chainsaw
10. A fountain that works itself from plastic bottles

Thicknesser

Crafts for the workshop are often created to perform woodworking. The material always has to be planed. It is to solve this problem that a surface planer is made. The machine consists of the following parts:

• The frame consists of two frame structures, which are welded from 40*40 mm corners. The frames are fastened with studs.
• Tabletop made of metal or lumber, pre-impregnated with drying oil. The working surface is bolted to the frame.

Bed with a steel tabletop for thickness planer Source prostanki.com

• A broach consisting of rubber rollers. They are taken from a broken washing machine. The rollers are provided with smooth rotation by sliding them onto bearings.
• A casing that protects rotating parts. It is made of sheet metal about 5 mm thick and fixed to a frame made of corners measuring 20*20 mm.
• Electric motor with a power of 6 kW, which can rotate at a speed of at least 3000 rpm.

Clamps are used to secure the thickness planer. The device is fixed on the working surface. Do not forget about the required gap, when setting it, take into account the thickness of the workpiece.

DIY garage press options

Homemade garage presses allow you to process various products and materials under pressure. Structurally, the equipment consists of cylinders. In the garage, such a machine is useful for straightening or fastening various elements, as well as for bending sheets of metal or pressing cardboard.

An example of a homemade press

For private use, a capacity of 10-15 tons is sufficient. Most often, a bottle jack is used with a provided hand pump, which acts as the main structural element.

Here are some interesting options for homemade garage presses:

Option from scrap materials

Rails will also come in handy

Ready purchase model

Convenient homemade press

Wood sanding machine

The design of such a machine has a cylinder on which sandpaper is placed. This unit rotates while processing the part. The assembly of a homemade machine is often performed for grinding cylindrical workpieces. A device is also made to create a flat surface of the workpiece.

When fixing the sanding paper, follow these rules:

• the width of the abrasive cloth should be approximately 250 mm;
• the sanding belt is connected without a gap exclusively end-to-end;
• The sandpaper is attached using a high-quality adhesive;
• at the edges of the shaft for the abrasive cloth there must be a side, the protrusion of which is from 2.5 to 4 mm;
• a rubber backing should be placed under the tape.

The shaft of the device is rotated by an electric motor. These two parts of the machine are connected by a belt drive. The design of the frame itself can have different designs. The option is chosen depending on the size of the workpieces being processed.

Device for polishing wooden parts Source notperfect.ru

Unusual flower beds

A flower bed is always an excellent decoration of the territory. An unusual flower garden is doubly interesting. You can experiment not only with plants, but also with the look and shape of the flower bed. Multi-tiered, vertical variations always attract the most attention.

You can make a flower garden in an old chest of drawers, cart or bag. There are many ideas using water pipes and plastic containers. Interesting, unusual ideas always attract the eye.

Briefly about the main thing

Typically, craftsmen assemble machines for their workshops if the area of ​​the room is at least 3 m2. Universal devices are manufactured or to perform a specific type of work. In addition to shelves and racks, in the workshop you can often find a workbench for carpentry work made of boards and bars, which is equipped with a vice.

Craftsmen also make a metal workbench from corrugated steel pipes, angles, and sheet metal. They also assemble a lathe on a metal frame, with a clamping spindle in the form of a drill head and an electric drive. Also popular in the workshop are a stationary circular saw based on a grinder, a drilling machine made from an electric drill, a surface planer made from an electric planer, and a CNC router.

The self-taught self-made man rocked the network with his video

The self-taught inventor captivated the online community of craftsmen with his video, in which he presented a fundamentally new utility model for improving the efficiency of work for craftsmen and those who like to work in the garage. The best part is that it doesn't require you to buy an idea. And what’s more, you can do all this yourself and even a novice master can handle it. All this is to the benefit of every resident of the cities in which the masters have settled, because with such a high level of skill, now you won’t want to hammer the walls at home on weekends or rattle with some kind of ultra-decibel grinding machine of unknown purpose. With such a device, you can safely create your own separate workshop and live the rich life of a Russian craftsman.

Wheelbarrow from a barrel

It is always more convenient to move various garbage or work materials on a cart rather than manually. It's easy to make a little helper from an old barrel. The vessel is simply cut in half. The edges of the cuts are processed to ensure safety.

The resulting body must be placed on wheels. It’s good if you’re lucky enough to find a base from an old cart. Otherwise, you will have to install the mobile system yourself.

You can make a “chassis” from scratch, but it’s better to use the frame as a basis. An old baby stroller or similar wheeled mechanism is suitable for this purpose.

Making homemade items for the dacha and vegetable garden is useful for every owner of a country estate. Interesting, useful things in everyday life will definitely make work easier and increase the comfort of country life. Finding “your” option among the vast variety of diverse ideas is not difficult.