Foxweld Master 202 – welding inverter characteristics + Video

Nowadays, using a welding machine in everyday life has become quite common. Previously, welding even for the simplest household purposes was the work of professionals. Now the level of development of welding machine technology is high enough that all work can be done at home. Special education to master the art of welding is also not necessary, since to successfully perform simple welds, it is enough to familiarize yourself with a small amount of information and master some practical welding skills.

One of the best solutions for household welding would be to purchase an inverter-type welding machine Foxweld Master 202. We will show and explain below how to use it correctly and what the welder itself is like.

foxweld master 202: inverter made in China.

The foxweld master 202 inverter weighs about 8 kg. The device is used for surfacing and stick electrode welding using direct current. Like similar models, foxweld master is distinguished by high efficiency, economical energy consumption, and stable arc burning. Can be used both outdoors and indoors while maintaining safety rules.

The foxweld master 202 welding inverter has several operating modes, which will allow you to perform any type of work from minor repairs to professional needs.

The foxweld master 202 welding machine also has a set of additional accessories.

Equipment

• Apparatus;
• Welding cables;
• Electrode holder;
• Ground clamp;
• Package.

Documentation

• Instructions for welding inverter Foxweld Master 202 3269
• Certificates of Conformity

Minuses:

1. heavy weight -8 kg.
2. uncomfortable grip;
3. a short cable that breaks at sub-zero temperatures;

External device of the welding inverter:

The standard rectangular inverter shape is limited to a metal casing with air openings. On the front side there is a panel for regulating the welding process, and there are also all the necessary indicators. It is convenient to carry the device thanks to a special rubberized handle.

Description Foxweld Master 202

The Foxweld Master 202 inverter belongs to the line of professional devices. A significant innovative feature of this model is the improved stabilization circuit, which ensures a smooth welding arc. As a result, metal spattering is reduced to a minimum. The model is also equipped with an additional throttle for smoothing welding.

Peculiarities:

• HotStar function
• ArcForce function
• Anti-Stick function
• Operates from 220V network
• Small dimensions and weight
• Digital display
• Modern cooling system

Contents of delivery:

• Network cable
• Return cable
• Source
• Electric holder
• User's Manual

The stability of the Foxweld Master 202 Inverter welding machine is confirmed by its characteristics. When connected to a 220V network, it is capable of cooking at a reduced operating voltage of 160V. You can use electrodes with a diameter of up to 5 mm.

Kemppi Master 202

The Kemppi Master 202 welding machine is one of the most popular inverters from the Kemppi brand. At the moment, this model has been discontinued, but it can still be found in stores and can be easily found on online bulletin boards with used equipment.

The Kemppi 202 welding inverter from the Master line is equipped with all the necessary functionality for amateur and semi-professional welding. The device is comfortable and easy to use thanks to the “hot start” function, which simplifies ignition of the arc. Automation and stabilization of the welding arc is possible. The device produces up to 200 Amps of welding current, and allows you to weld with minimal metal spattering.

Kempi Master 202 is assembled in accordance with strict European quality standards and boasts an increased degree of safety. The “filling” is protected by a durable plastic case that is resistant to high temperatures, so that when heated it does not emit fumes that are dangerous to humans. All adjustments are simple and easy to use. And their size is convenient for a person with any size of hands; accidental changing of settings is simply excluded.

Kemppi Master 202 is positioned as a device for domestic use. Therefore, you should not use this inverter for professional welding; its power may simply not be enough. Although professionals in their field can weld metal even using a low-power inverter.

To sum it up, the Kemppi Master inverter model 202 is an excellent inverter for a summer resident or garage handyman. A used device will cost about 10 thousand rubles, which is extremely profitable considering all the advantages of this model.

Some argue that Kempy never had the Master 202 in stock, and that only counterfeits of the well-known brand are on sale. We cannot clearly confirm or deny this information. However, the Kempi Master welding machine copes well with the task, even if it is homemade in China.

This is interesting: Do-it-yourself transformer for welding: types, diagram and assembly

Characteristics of Foxweld Master 202

Key performance properties

The welding inverter Foxweld Master 202 belongs to the class of professional equipment, so it can be used during construction work related to the installation of metal structures, for the manufacture of various kinds of pipelines, repair of sewers and other utilities.

The positive technical characteristics of this equipment include the following points:

• The design contains the most modern circuit, aimed at the final output of a stable voltage, which makes the welding current as smooth as possible. This will be very noticeable during welding work involving the connection of pipes or sheet metal;
• For welding machines of this type, the largest diameter of the electrodes with which they can work is 5 mm;
• The operation of the device does not depend on the frequency of the current, therefore, during work there will be no splashing of metal, which will make it much safer;
• The design has an excellent power reserve and conversion frequency, which allows for the smoothest arc ignition;
• Despite the fact that the device has very compact dimensions, it is capable of delivering a maximum current of 200 A;
• To ensure the smoothest seam during welding, this inverter is equipped with a special choke at the output;
• To facilitate work, the device has special functions: hot start, arc forced and so-called anti-sticking;
• To ensure the normal functioning of this inverter welding machine, a standard electrical network that produces a voltage of 220 V is suitable, but it is capable of operating even if the voltage drops down to 160 V;
• The design has a special protective system that does not allow the device to deteriorate if it is suddenly connected to a network with a voltage of 380 V;
• The device is distinguished by its small dimensions, in addition, it has a fairly small permitted weight, even for an inverter device, which is only 9 kg;
• If a short circuit suddenly occurs, the device’s automation is triggered, which instantly turns off the welding current;
• In order to carry out work using thin electrodes, the diameter of which is about one and a half millimeters, it is possible to adjust the welding current manually;
• The Foxveld device is not too expensive, its price is quite comparable with products produced by other manufacturers;
• To make setting up the device even more convenient, there is a special digital display on its front panel;
• If the work will be carried out in conditions where there is no power supply, then this equipment can be powered from gasoline or diesel generators.

Unit design

The Master 202 welding inverter demonstrates excellent performance at home. Manual installation is completely worth the cost if the equipment is purchased for simple basic operations. The device does not require special maintenance and is unpretentious during operation.

End panel of the Kemppo Master 202 welding machine

The general assembly of the Kempi unit is performed with sufficient quality, which eliminates the occurrence of breakdowns and malfunctions. The device is capable of creating neat seams even in difficult conditions. The Kempi manual welding machine has a non-standard system of sockets into which the main wires are attached.

The wire contacts selected for the Master 202 device are no more than 100 cm. The wires cannot be replaced with more convenient options, since the connectors in the equipment have a specific configuration. On the end panel of the product there are switches and a temperature control lamp.

The Chinese manufacturer has improved the air cooling system, which affects the overall operation of the device. The cooling system demonstrates good performance and allows long-term operations without overheating the case. Despite its impressive dimensions, the device is characterized by low noise levels when turned on.

The Master 202 welding machine is switched on in two modes - weak and powerful. The toggle switch has a simplified design without numbers, and there is no possibility of fine-tuning the unit.

Device description: FoxWeld Master 202 front panel

Front panel with display and switch off switch

• Reliability of equipment, possibility of autonomous use;
• slight metal spattering;
• forced cooling system;
• there is an anti-stick function for the electrode so that it does not stick to the base metal;
• there is a “Hot Start” option for quickly obtaining an arc;
• “ARC FORCE” function for stable arc burning;
• resistance to high humidity;

On the front side of the device there is a special a yellow lamp that lights up when the voltage in the network changes; if the protection is triggered, the device will be turned off for a while.

Technical capabilities

It has an improved voltage stabilization circuit, thanks to which the device operates on a smooth welding current and is capable of high-quality welding of pipes, sheet materials, etc. The maximum diameter of electrodes for Master 202 is 5 mm. The operation of the device does not depend on frequency, so splashing during operation is minimized. The power reserve and high conversion frequency are sufficient to ensure that ignition of the arc is smooth and simple. Despite its compact size, the device is capable of delivering welding current up to 200A. To smooth the weld seam, the model is equipped with a special throttle at the outlet. The hot start, anti-stick and arc afterburning functions facilitate the work process. The device operates in a standard 220 V network environment. The Master 202 welding inverter operates stably when the voltage drops to 160 V. To protect against accidental connection to a 380 V network, the device is equipped with built-in protection. The unit has a light weight (9 kg) and compact dimensions (270x130x300 mm). In the event of a short circuit, the welding current is immediately switched off. To work with thin electrodes (from 1.7 mm), it is possible to manually adjust the welding current. The price for the professional welding machine Master 202 is comparable to the cost of household devices. For ease of settings, the model has a digital display on the central control panel. It is possible to operate from gasoline and diesel current generators.

Inverter welding machine FoxWeld Master 202T

Master 202T , inverter-type welding machine with improved characteristics. Designed and made for professionals where power and reliability are a top priority. An improved welding process stabilization circuit provides good ignition and a “soft” welding arc with minimal spatter. Welding with any electrodes up to 5 mm in diameter inclusive. A special feature of this device is a switch to an additional mode of direct current argon arc welding (TIG DC), which allows you to weld stainless steel, steel, copper, titanium using a torch with a non-consumable electrode.

Price: 17,543 rub.

Order

The welding inverter Master 202T is made according to a bridge circuit and produces a high-frequency stabilized welding current. Its dynamic characteristics do not depend on frequency, unlike IGBT inverters, which provides benefits in the stability of the welding arc and minimal spatter. Another advantage of this device is the very easy ignition of the arc due to the high conversion frequency and power reserve. This welding inverter is suitable for both professionals who constantly use a welding machine, and for people who want to weld from time to time and are used to working with a high-quality professional tool. Unlike many welding machines, this machine actually produces the stated characteristics - 200A welding current, while having dimensions similar to many household welding machines. The device has an additional choke at the output, smoothing the welding process, and also has modes to facilitate the welding process - Anti-Sticking, Arc-Force and Hot-Start.

Features of the welding inverter

• Small, compact, powered from a regular 220V network with reduced power consumption
• Really delivers the stated characteristics, maximum welding current 200A
• Confidently withstands low and high voltages, operates when the voltage drops to 160 V, and has protection against accidental switching on at 380 V!
• One of the best systems for stabilizing the welding process and minimizing spatter today, due to additional “filling” and an improved control circuit for the welding process
• Welding terminals of increased diameter (13 mm instead of 8 mm on most household and cheap devices)
• Smooth adjustment of welding current
• Switch for additional mode of direct current argon arc welding (TIG DC)
• It has built-in functions to facilitate arc ignition (Hot-start), a function to stabilize and prevent sticking during the welding process (Arc-Force) and a function to reduce the welding current in the event of a short circuit of the electrode or electrode holder (Anti-Sticking)
• Complete kit to get you started

Application area

• A universal welding machine for all occasions
• Welding with any electrodes, any materials
• Welding on construction sites, welding of light and medium metal structures
• Welding machine for garage, workshop, home craftsman
• Repair and installation work, including high-rise works, repair and installation of sewer systems, utility work
• Crafts and blacksmithing, individual farming
• Structures for the oil production and refining industry

Standard equipment of the welding inverter:

• Source with network cable
• Return cable with clamp
• Electrode holder for manual arc welding (MMA)

Specifications

​Advantages and disadvantages of the device

Among the advantages are its low cost, ease of use, and the ability to support argon welding.
In addition, the welder is quite easy to repair. All electronics are located on one board; its simple replacement will solve any, even the most complex, problem with electronics. The disadvantages include power cables; they are of little use for our climatic conditions. At low temperatures they quickly become tanned, become completely inflexible and inconvenient to work with. Many users note that the carrying holder is inconvenient. The device is quite popular in Russia, so very often it may turn out that your Foxweld Master 202 is a fake. Beware of fakes of foxweld master 202.

Advantages and disadvantages

The welding inverter FoxWeld Master 202 has the following advantages:

• Relatively light weight, since for a device with such parameters 9 kg is a completely acceptable value.
• Continuous operation at maximum parameters can be carried out 60% of the time. Considering that they are not always used, at lower currents the continuous operation time becomes longer.
• The ability to use electrodes up to 5 mm, which covers the entire range of intended work.
• Affordable price.
• Simplicity and reliability of design.
• The presence of several important functional additions.

As with many other devices, there are some disadvantages here, which are manifested in the following:

• The design does not provide a belt, which creates problematic moments during use.
• The cables included in the kit lose their elasticity at low temperatures.
• The standard holder does not meet high quality standards, so it has to be changed immediately, and the cable turns out to be too short.
• Has a high noise level.

Specifications:

Idle speed is 59 volts, welding current is adjustable over wide intervals (from 20 to 200 amperes).

To operate, you need a mains voltage of 210-255V, minimum value 180V. This device received excellent arc ignition, a good appearance of the weld, a uniform droplet shape, and good current characteristics. This is achieved thanks to the operation of power modules at a purity of more than 80 kilohertz, where the response value does not exceed 500 milliseconds. Without emergency on. Foxweld Master 202 at the maximum welding current (200 amperes) is 60%.

Electrodes for foxweld master 202

Advantages of foxweld master 202, Italy:

Equipped with forced ventilation of all components

• there is thermal protection
• electronic scoreboard
• slots for hot air are made
• There is a 140 mm fan in the rear.
• robust housing
• rubberized plastic handle
• smooth adjustment of welding current, easily adjusted by switch
• budget solution
• The device is turned off with the front toggle switch
• the display does not change its readings, as for example on Resant (the values ​​remain unchanged during the process)

Minuses:

1. heavy weight -8 kg.
2. uncomfortable grip;
3. a short cable that breaks at sub-zero temperatures;

External device of the welding inverter:

The standard rectangular inverter shape is limited to a metal casing with air openings. On the front side there is a panel for regulating the welding process, and there are also all the necessary indicators. It is convenient to carry the device thanks to a special rubberized handle.

Master Problems 202

If you notice any changes in the operation of the device, for example, the light does not light up, you should stop working immediately.

• if the circuit breaker fuse is turned off, the automatic plugs on the electrical panel should be replaced with a value of 25-35 amperes;
• if the foxweld master 202 inverter begins to emit a burning smell, it should be turned off immediately and taken for repair;
• if your electrode often sticks, you should increase the current;
• If the arc does not light up, but the fan and green signal are working, you should check the welding current regulator (position OA).

You should beware of various fakes of foxweld master 202 as this can lead to bad consequences. Always use original equipment, not counterfeits. This will save you money and health

Advantages of foxweld master 202, Italy:

Equipped with forced ventilation of all components

• there is thermal protection
• electronic scoreboard
• slots for hot air are made
• There is a 140 mm fan in the rear.
• robust housing
• rubberized plastic handle
• smooth adjustment of welding current, easily adjusted by switch
• budget solution
• The device is turned off with the front toggle switch
• the display does not change its readings, as for example on Resant (the values ​​remain unchanged during the process)

Welding machine Master 202

The Master 202 welding machine is manufactured in China. It is used for welding indoors and outdoors under appropriate weather conditions. The device circuit has one power board, which ensures simplicity of design and its reliable operation. The inverter allows you to create high-quality seams.

The device is designed to work with standard network parameters of 220 volts with permissible deviations of about 20%. Considering that voltage surges occur very often under various operating conditions, such a wide permissible limit will be convenient.

The maximum welding current of 200 amperes is sufficient for all domestic needs, as well as for some procedures in industrial use.

Welding machine Master 202

Advantages and disadvantages

The welding inverter FoxWeld Master 202 has the following advantages:

• Relatively light weight, since for a device with such parameters 9 kg is a completely acceptable value.
• Continuous operation at maximum parameters can be carried out 60% of the time. Considering that they are not always used, at lower currents the continuous operation time becomes longer.
• The ability to use electrodes up to 5 mm, which covers the entire range of intended work.
• Affordable price.
• Simplicity and reliability of design.
• The presence of several important functional additions.

As with many other devices, there are some disadvantages here, which are manifested in the following:

• The design does not provide a belt, which creates problematic moments during use.
• The cables included in the kit lose their elasticity at low temperatures.
• The standard holder does not meet high quality standards, so it has to be changed immediately, and the cable turns out to be too short.
• Has a high noise level.

Functionality

The welding inverter Master 202 is equipped with many useful and modern functions. They provide ease of use, which affects the production of high-quality and strong seams.

Front panel of the inverter Master 202

This device has the following functions:

• Anti-stick. It stops the flow of current in cases where the electrode sticks to the surface to be welded. At the moment, a short circuit is created, which negatively affects the further operation of the device, so the function helps maintain functionality for a long time. When the circuit opens, the current supply to the electrode is automatically turned on, and welding can continue.
• Hot start. This function increases the current level at those moments when the arc is ignited.
• Forced arc. Promotes an increase in current strength when the welding arc becomes smaller in size. This helps prevent sticking and continues to create a seamless seam. Thanks to this, the parameters remain more stable during operation.
• Automatic shutdown function when the temperature rises critically. It helps protect the device from overheating so that it does not break under high loads.
• The equipment can be connected to autonomous power sources, such as generators.
• The Master 202 inverter welding machine circuit contains an automatic shutdown system. It triggers if a high voltage is applied to it, above the permissible voltage. If a surge occurs, this system helps to avoid negative consequences. The fact that this particular function worked, and the device did not break, is indicated by a burning yellow light located on the device body. When the voltage returns to normal, the lamp goes out and you can continue working.

Specifications

Internal part of the Master 202 inverter
The FoxWeld Master 202 welding machine has the following technical characteristics:

• Type of welding – manual electric arc.
• Input voltage – 180-240 V.
• Welding – 20-200 A.
• Number of power phases – 1.
• Voltage x.x. – 62 V.
• The type of output current is constant.
• Max. welding current during continuous operation – 120 A.
• Efficiency factor – 80%.
• Insulation class – F.
• Operating voltage – 20.80-28 V.
• Arc forcing is present.
• Anti-stick – present.
• Hot start – present.
• Degree of protection – IP21.
• Dimensions – 300 x 130 x 270 mm.
• Weight – 9 kg.
• Set – holder, return cable with clamp.

Instructions for use

Before you start using the FoxWeld Master 202 welding inverter, you should make sure that it is working. It must be free of mechanical damage, obvious contamination that could interfere with its operation, etc.

The equipment must be installed on a flat surface in a vertical position. The main thing is to ensure access to fresh air to the ventilation system.

Otherwise, there is a risk that the device will overheat greatly, or even burn out from overheating if the loads are constant and high.

Do not cover the device with cloth or allow it to come into contact with moisture. When replacing a standard cable, you need to pay attention to the cross-section of the new one. In a standard short cable, the cross-section is 1.6 cm2, and when replacing with a 5-meter analogue, a cross-section of 2.5 cm2 and higher should be selected. If it is lower, the voltage will be lost.

When preparing the device for use, you need to connect to it a ground cable, which is connected to the minus, and a power cable, which should be connected to the plus. During operation and during connection, situations should not be allowed in which the cables would come into contact with each other.

"Important!

Before turning on the device, you need to make sure that the parameters of the electrical network are within acceptable limits for its operation.”

When everything is prepared, you should turn on the toggle switch, which is located on the back of the device. After this, the corresponding indicator should light up. Next, you need to configure the welding machine to the parameters required for welding the parts. This model has the necessary set of settings, which allows you to choose the appropriate characteristics for anyone.

The welding process itself occurs in a standard way, with the exception of automatic functions that simplify the work of the master. After all work is completed, the shutdown process occurs in reverse order.

Rules for connecting and using the device

Before you start working with the Foxweld inverter model Master 202, you need to check it for serviceability and the absence of serious mechanical damage to the case. The equipment must be installed on a flat surface. At the same time, it is necessary to ensure that no objects limit access to the fresh air necessary to ensure effective ventilation. For the same reason, you should not cover the inverter with any material.

The standard power cable supplied with the Foxweld Master 202 inverter has a cross-section of 16 mm2. If you need to replace it with a wire more than 5 meters long, then the cross-section of such a wire must be at least 25 mm2. Neglecting this recommendation leads to significant voltage losses.

Welding cable extension for inverter

Most often, the Foxweld inverter is used to perform welding using MMA (manual arc) technology. For this device, electrodes for both direct and alternating current, with any type of coating, can be used.

To prepare Master 202 for welding using this technology, perform the following steps.

• Connect the power cable and ground cable to the corresponding connectors on the device body.
• Electrode manufacturers recommend connecting the power cable to the positive connector, and the ground cable to the negative connector. Make sure that the cables do not come into contact with each other.
• The ground cable, which should have the minimum possible length, must be securely connected to the parts to be welded, for which a special clamp is used.
• Make sure that the voltage in the supply electrical network is within the limits specified by the Master 202 manufacturer. It is also necessary to check that the circuit breakers are designed for the current that the welding machine will consume.
• After completing all the preparatory steps, you can connect the Master 202 to the electrical network and turn on the toggle switch on the rear panel. If everything is done correctly, the network indicator on the front panel will light up.
• After turning on the inverter, you need to select the type of welding (MMA), for which a special switch is used, and also set the required value of the welding current, focusing on the diameter of the electrode and the characteristics of the welded joint.
• After welding is completed, the device turns off in the reverse order.

Distinctive features of this inverter

This model has been on the market for quite a long time, so it is no longer a novelty for professional welders. In the manufacture of this equipment, only the highest quality components are used, and it is assembled by professional designers. It has no cracks or backlashes, so purely externally this device will look very aesthetically pleasing and attractive.

The design includes a special cooling system, which allows operation at maximum current for the longest period of time. The frame is made of high-quality metal, connected with bolts, and all power transistors are secured with special screws. If the equipment does overheat, it has an automatic shutdown system that will simultaneously light the indicator light located on the front panel.

Before starting work, you should check the integrity of the body, which should not have even the slightest damage. Install this structure so that it is located separately from other equipment and away from various kinds of obstacles that could block the ventilation openings.

When welding is carried out, it is strictly forbidden to cover this apparatus with dense materials that would impede the passage of fresh air into the ventilation system. It cannot be connected to the electrical network if the cross-section of the supply electrical wire is less than 2.5 square millimeters. The length of welding cables must be at least 5 meters.

It is worth noting that this welding machine can also be used for semi-automatic welding, you just have to connect a feeder, which will melt the electrode in the area where the arc is located. It is also permissible to use a non-consumable electrode made of tungsten. This allows you to weld together workpieces made of non-ferrous materials such as aluminum, duralumin or copper.

Electrical diagram foxweld master202

PSU circuit foxweld master202

Block diagram foxweld master 202

General electrical diagram of foxweld master 202
The inverter-type welding machine Foxweld Master 202 is a device for semi-professional and household use, characterized by ease of maintenance and operation.

Description of the device

The Kempy Master 202 welding machine is a unit used for manual work using electrodes. The device has a pleasant design with smooth corners, which helps to implement production procedures and installation work. The orange body of the Kempi inverter has a rounded shape and convenient fastening of wires, which simplifies the welding process.

Welding machine Kemppi Master 202

The welding installation is similar to products from the Finnish company Kempi, which has been producing equipment since 1949. The manufacturer from Finland is considered a reliable supplier of equipment due to the good price-quality ratio of the products. The company is known for models of automated welding devices produced under the markings 150 and 180. Model 202 is a Chinese analogue of existing Kempey devices.

This basic unit configuration is frowned upon by professional welders, but the Kempi Master 202 is excellent for a variety of welding procedures. This device is a budget alternative to expensive professional-type units. The average cost of model 202 varies from 7,000 to 13,000 rubles. The final price of the device depends on the store where the products are sold.

A distinctive feature of the device is the fact that it performs basic household functions and operates for a long period, subject to operating conditions.

Technical characteristics Master 202

The welding machine Master 202 is designed for manual arc welding, it belongs to the category of professional equipment, therefore it is able to cope with complex tasks at construction sites, in the manufacture of medium and light metal structures, in the repair of utility and sewerage structures, and in the oil industry. Another advantage of the device is that the price for the Master 202 welding machine is set by the manufacturer, so it is approximately the same for all distributors.

Principle of operation

Kemppi Master 202 - top view

The operating features of the Kempi Master 202 welding machine are not published by the manufacturer, so you have to study its operation in practice. The inventory operates from a conventional single-phase electrical network. The welding machine operates on the basic principle of converting alternating current into direct current.

The packaging of the Kempi installation indicates the maximum electrode size - No. 5. The reality is that when using electrodes of this configuration, problems arise with the welding surface - it needs to be preheated. When contacting massive profiles, malfunctions and disturbances in the functioning of the device are noted.

The optimal electrode is electrically conductive rod No. 2. An electrode of this configuration is recommended by the manufacturer for use in the Kempy Master 202 apparatus. The easy-to-use Kempy equipment ensures reliable welding of metal structures and small-sized parts. The stable welding current used during operation allows you to obtain a super-strong seam of excellent quality.

Electrodes for Kemppi Master 202 inverter

additional characteristics

Manufacturers

• Svarog
• Wester
• FUBAG
• RESANTA
• Aurora
• Elitech
• FoxWeld
• Quattro Elementi
• UBR
• BRIMA
• Solaris
• Cedar
• DENZEL
• Wert
• Telwin
• LEOPARD
• Daewoo Power Products
• Interskol
• BestWeld
• Bort
• PATRIOT
• TSS
• Edon
• Empire
• Blueweld
• STAVR
• Caliber
• Redbo
• Kraton
• RedVerg
• PRORAB
• Champion
• NEON
• TRITON
• Awelco
• VORTEX
• EWM
• Energomash
• Start
• Fast and Furious
• Kronwerk
• Sturm!
• Spec
• EUROLUX
• Sibrtech
• Huter
• RUCELF
• ESAB
• RUSELCOM
• Hitachi
• Drummer
• DIOLD
• Summer resident
• Torus
• MAXCUT
• Energy
• SPECIALIST
• PIT
• Kemppi
• electrical appliance
• PIT
• Ergomax
• BUFFALO
• ELAND
• MARS
• Energolux
• Gigant
• Flama
• Atlant
• Rilon
• Ergus
• COLT
• Cyclone
• Weldmaster
• Brado
• ENDEVER
• Plazer
• TERMITE
• DGM
• Kolner
• UNION
• Nikkey
• VIKING
• Tesla
• FAVORITE
• START
• Victory
• Centaur
• ProfHelper
• ARCO
• ADA
• Arc
• HUGONG
• Parma
• RIGA Electronics
• Paton
• Mitech
• Rezonver
• Merkle
• G.Y.S.
• Top Machine
• Strat
• Varteg
• Bulat
• ADA instruments
• Helvi
• Grovers
• Hypertherm
• DNIPRO-M
• MILITARY
• PTK
• Record
• Aiken
• force
• Dnipro-M
• SVARIS
• ProCraft
• WIEDERKRAFT
• DeFort
• BRAIT
• Jasic
• Lefty
• Ermak
• IZH
• IVT
• SOROKIN
• REXANT
• Herz

Other FoxWeld Welding Machines

Similar products FoxWeld Master 202

Features of TIG welding

Foxweld Master 202 can also be used for direct current argon arc welding using non-consumable electrodes. In this case, it is allowed to weld copper products and steel structures by igniting the arc using the contact method. Preparing the device for operation with the TIG process is as follows:

• the grounding clamp is attached to the welding part under the previously described conditions, then it is connected to the positive terminal of the inverter;
• The burner cable is connected to the negative contact, and its hose is connected to the argon cylinder through a reducer located on the gas tank.

After this, you need to open the cylinder (unscrew the valve) and adjust the operating pressure at the outlet of the reducer. Stopping the gas supply to the welded area is carried out using the tap on the torch.

TIG welding is performed with tungsten electrodes, which allow you to perform work using direct current. In this case, the tip of the welding rods must be sharpened at 90–120 degrees at a current of 120 to 250 amperes, at 60–90 degrees (from 30 to 120 amperes), at 30 degrees (current no more than 30 amperes). It is also important to choose the right tungsten rod. Its diameter should be: at a current from 100 to 200 A - 2 mm; at current from 60 to 150 A – 1.6 mm; current up to 80 A – 1 mm.

The arc in the TIG process is ignited by contact - the welding rod is touched to the part prepared for processing, and then removed from the surface. The work process should be completed by increasing the distance between the workpiece and the torch (“breaking” the arc). In this case, the gas supply is not stopped immediately, but 5–6 seconds after the end of welding.

Please pay special attention to the fact that the described inverter is configured for MMA welding. Be prepared for the fact that using Master 202 using TIG technology will always be accompanied by excessive heating of the tungsten welding rod.

Recommendations for using an inverter for gas shielded welding

The manufacturer of the Foxweld inverter model Master 202 has provided the possibility of using it for welding performed in a shielding gas environment (TIG). This welding is performed using direct current, and a non-consumable electrode is used to create the welding arc. The circuit of this device does not contain an oscillator, so the welding arc is ignited by touch. You cannot connect an external oscillator to a device of this model, as this may lead to failure of the inverter.

It must be borne in mind that the Foxweld Master 202 inverter is designed for welding performed using MMA technology, so you should be prepared for the fact that the non-consumable electrode will become very hot (this is due to the increased arc voltage).

TIG welding parameters

Preparing the device for welding using TIG technology and its implementation is carried out in the following sequence.

• The cable through which electric current is supplied to the welding torch is connected to the negative connector, and the ground cable to the positive connector.
• The workpiece cable is securely connected to the parts to be welded using a special clamp.
• To supply shielding gas to the welding zone, a special hose is used, which connects the welding torch and the reducer on the gas cylinder. After securely fixing both ends of the hose, open the valve on the gas cylinder and adjust the gas pressure using the reducer. To supply gas directly to the welding zone, a valve located on the welding torch is used.
• It is necessary to fix a non-consumable electrode in the clamp of the welding torch (thoriated tungsten rods are usually used), the diameter of which is selected depending on the value of the welding current: up to 80 A - 1 mm; up to 150 A – 1.6 mm; up to 200 A – 2 mm. The magnitude of the welding current also determines the sharpening angle of the electrode tip: up to 30 A - 300; up to 120 A – 60–900; up to 200 A – 90–1200.

• It is necessary to check that the voltage in the electrical network is within the range specified by the manufacturer of the Master 202. It is also necessary to check the parameters of the machine installed in the electrical panel: it must withstand the current that the welding machine will consume.
• The inverter should be connected to the electrical network using a power cable. The device itself is turned on using a toggle switch located on the rear panel. At the same time, the network indicator on the front panel should light up. — After turning on the inverter, it is necessary to set the required welding current and turn on the gas supply using the valve on the torch.
• The welding arc is ignited by touching the electrode to the surface of the parts being connected and then withdrawing it.
• After the weld is formed, the arc is extinguished by moving the electrode away from the surface of the parts. After extinguishing the arc, you should not immediately turn off the supply of shielding gas; you must wait a few seconds.
• When the welding work is completed, the inverter turns off and the gas supply is shut off using the valve on the cylinder.

Example of welds made with a Foxweld inverter model Master 202

Briefly about possible problems with the inverter and how to eliminate them

In cases where the inverter is turned on, the cooling device is functioning normally, and the green signal of the device being ready for operation does not light up, you must immediately contact the repair service. If you experience electric shocks while using the unit, you need to carefully check the quality of the contacts of the plug connector and ground wire, socket and cable.

Other types of inverter failures Master:

• Disabling the safety circuit breaker when performing welding work. The problem is usually solved by replacing the automatic plugs on the electrical panel with products with a rating of 25 or 32 amperes.
• When operating the device, a burning smell is noticeable and smoke comes out of the inverter. You cannot try to correct this situation on your own. It is mandatory to contact repair specialists.
• The arc does not ignite, but the fan is running and the green signal is on. The correct position of the current regulator for welding is checked; perhaps its value is not set (position OA).
• About the rod. Sometimes the problem is solved by choosing a higher current value, heating the electrode, holding it at an angle of about 45 degrees to the workpiece, and not in a vertical position.
• The yellow indicator on the panel lights up. As already mentioned, this indicates that the device’s thermal protection is turned on. No action needs to be taken. As soon as the network indicators return to normal, the indicator will go out and you can start working.

Master Problems 202

If you notice any changes in the operation of the device, for example, the light does not light up, you should stop working immediately.

• if the circuit breaker fuse is turned off, the automatic plugs on the electrical panel should be replaced with a value of 25-35 amperes;
• if the foxweld master 202 inverter begins to emit a burning smell, it should be turned off immediately and taken for repair;
• if your electrode often sticks, you should increase the current;
• If the arc does not light up, but the fan and green signal are working, you should check the welding current regulator (position OA).

You should beware of various fakes foxweld master 202

since this can lead to bad consequences. Always use original equipment, not counterfeits. This will save you money and health

Common problems and their solutions

Here are examples of simple problems; in more complex cases, it is better to immediately send the device to a repair service. For example, if the ready-to-work light stops lighting or mild electric shocks occur. If there is a burning smell from the inverter and, moreover, smoke appears from the device, the best solution would be to contact a specialist.

1. Often, when a circuit breaker is turned off, it is enough to simply change the plugs.
2. The arc does not light up, but the cooling fan is running and the welder's readiness indicator shows that everything is in order with the device. Most likely, the current is not set, look at the current adjustment, it is probably in the 0 A position.
3. The electrode began to “stick”; in most cases, the situation will be corrected either by increasing the current or by changing the welding angle from strictly vertical to an angle of 45 degrees to the part.
4. The yellow indicator lights up, indicating that the device is overheating - just stop working and wait until the device cools down and the yellow signal goes off. This will mean that the device is ready for use again.

Possible malfunctions of the device and ways to eliminate them

A situation may arise when the power indicator does not light up when the device is turned on and the fan is running. This may indicate a failure of the circuit elements, which requires contacting a service center. Situations where electric shocks are felt while working on the inverter can be resolved by checking the contacts of the power plug, the quality of the connection of the grounding and power cables. Other common malfunctions in the operation of the Foxweld inverter of the model in question include the following.

• The network machine is turned off. In this case, you should replace it with a more powerful one (25 or 32 A).
• The smell of burning coming from the device and its smoke require contacting a service center.
• If the welding arc does not ignite when the power indicator is on and the fan is running, you should check the position of the current regulator. It may be at position "0".
• When the yellow indicator on the device panel lights up, this means that automatic surge protection is turned on. You should wait until the network parameters return to normal.

If you purchased an original Foxweld inverter model Master 202, and not a fake, you will certainly be satisfied with its technical capabilities, reliability, ease of operation and maintenance.

How to properly connect an inverter

Before you start using the device, you must check all included components for integrity. Using an external inspection, check the integrity of the power cables and the grounding cable. Make sure that the cables are securely connected to the device. Inspect the fan; there should be no blockages or unnecessary objects in it. If work takes place indoors, it is necessary to ensure a constant flow of fresh air.

After switching on, under no circumstances should you cover the device with any materials, especially those with a dense structure. There may be cases when, for some reason, the power wires fail, wear out, or disappear altogether. To make new ones, you will definitely need to select the cross-section of the conductive parts of the wire. If the length of the wires is less than 5 meters, the cross-section must be at least 16 squares. If you want to increase the length of the power wires, choose a cross-section of 25 squares.

Do not reverse the polarity of the rods before connecting (the polarity is indicated in the instructions for them). The grounding clamp is marked “minus”, and the electrical holder clamp is marked “plus”. The grounding clamp should be located as close as possible to the work site.

Be sure to check the network voltage, whether it is coming to the inverter and what value it is. There is an indication on the welder panel, and the power indicator indicates the device is ready for operation.

After all the necessary checks, we switch the switch to arc welding mode (MMA toggle switch). Afterwards, you need to select the amount of current necessary and sufficient to carry out welding work under the given conditions and requirements.

Upon completion of welding work, be sure to turn off the device and remove the working rod from the clamps.

The master 202 welding machine is capable of operating in DC argon arc welding mode or so-called TIG welding. This requires special tungsten electrodes and a number of actions:

1. Attach the grounding wire to the part to be worked on.
2. Attach the cable from the burner to the negative contact.
3. Connect the hose to an argon cylinder through a reducer to regulate the gas supply pressure.

For different currents of work, it is necessary to select a certain diameter of tungsten rods.
Moreover, the greater the current, the larger the cross-section of the rod should be. At currents from 10 to 200 A, the diameter of the rod should be 2 mm, 60-150 A - 1.6 mm, and up to 80 A - 1 mm. The ignition of the arc occurs after the rod comes into contact with the part and is gradually withdrawn from the part. Next comes the actual welding. The work is stopped by increasing the distance between the torch and the workpiece, while the gas supply is turned off 5-6 seconds after welding is completed.

Sources

• https://svarak.ru/oborydovanie/foxweld-master-202-otzyivyi-harakteristika/
• https://www.vseinstrumenti.ru/instrument/svarochnoe-oborudovanie/mma/svarochnyj-apparat-invertor/foxweld/master-202-3269/
• https://www.svarbi.ru/cat/svarochnyj-invertor/5594/
• https://ArmRinok.ru/oborudovanie/svarochnyj-apparat-foksveld-202.html
• https://tokar.guru/svarka/svarochnyy-apparat-foxweld-master-202.html
• https://regionvtormet.ru/svarka/chto-iz-sebya-predstavlyaet-svarochnyj-apparat-foxweld-master-202-harakteristiki.html
• https://OTZIV-OTZIV.ru/katalog/svarochnye-apparaty/svarochnye-apparaty-foxweld/otzyvy-foxweld-master-202-11618084.html
• https://tutmet.ru/foxweld-master-202-invertor.html