GOST 5927-70 hex nut M6, M8, M10, M12, M16, M20, M24, M27, M30 and others

HEX NUTS ACCURACY CLASS B

Design and dimensions

Hexagon nuts, product grade B. Construction and dimensions

MKS 21.060.20 OKP 12 8300

1. DEVELOPED AND INTRODUCED by the USSR Ministry of Ferrous Metallurgy

2. APPROVED AND ENTERED INTO EFFECT by Resolution of the Committee of Standards, Measures and Measuring Instruments under the Council of Ministers of the USSR dated 02.18.70 N 178

3. The standard fully complies with ST SEV 3683-82

5. REFERENCE REGULATIVE AND TECHNICAL DOCUMENTS

Designation of the referenced technical document

6. The validity period was lifted according to Protocol N 5-94 of the Interstate Council for Standardization, Metrology and Certification (IUS 11-12-94)

7. EDITION (February 2010) with Amendments No. 2, 3, 4, 5, 6, 7, approved in February 1974, March 1981, June 1983, May 1985, March 1989. , July 1995 (IUS 3-74, 6-81, 11-83, 8-85, 6-89, 9-95)

1. This standard applies to hex nuts of accuracy class B with thread diameters from 1.6 to 48 mm.

(Changed edition, Amendment No. 4).

2. The design and dimensions of the nuts must correspond to those indicated in the drawing and table.

(Changed edition, Amendment No. 2-7).

3. Thread - according to GOST 24705.

(Changed edition, Amendment No. 2, 4).

3a. Tolerances of dimensions, deviations in shape and location of surfaces and control methods not established by this standard are in accordance with GOST 1759.1*. ________________ * The document is not valid on the territory of the Russian Federation. GOST R ISO 4759-1-2009 is valid, hereinafter in the text. — Note from the database manufacturer.

3b. Allowable defects of nut surfaces and control methods are in accordance with GOST 1759.3*. ________________ * The document is not valid on the territory of the Russian Federation. GOST R ISO 6157-2-2009 is valid. — Note from the database manufacturer.

3a, 3b. (Introduced additionally, Amendment No. 5).

4. (Deleted, Amendment No. 5).

5. Technical requirements - according to GOST 1759.0*. _________________ * On the territory of the Russian Federation, in terms of marking, GOST R 52627-2006, GOST R 52628-2006 apply.

6. (Deleted, Amendment No. 2).

7. The weight of the nuts is indicated in Appendix 1.

Hex nut GOST 5915

GOST 5915-70 hex nut - used in mechanical engineering and construction as connection parts.

Nut GOST 5915 analogue of DIN 934, ISO.

It is possible to supply nuts in accordance with GOST 5915-70 with fine thread pitches and in a high-strength version (strength classes 8.0 and 10.0) made of 20G2R steel.

Nut size range: M6 nut, M8 nut, M10 nut, M12 nut, M16 nut, M20 nut, M24 nut, M27 nut, M30 nut, M36 nut, M42 nut, M48 nut, M52 nut.

GOST 5915-70 hex nut. Nut weight DIN 934

Nuts according to this GOST made of steels 35, 40Х, 09G2S sizes from M4 to M42, nuts with zinc coating are made to order.

Nut price 2015. Nut GOST 5915-70 hexagonal produced by Severstal hardware OSPAZ

Specifications. GOST 5915-70 hex nut.

• with strength classes 6.0, 8.0, 10.0 * from steels 20, 35, 20G2R;
• galvanized zinc coated

Example of a symbol:

Nut with thread diameter d 12 mm, with a large thread pitch, with a thread tolerance of 6H, strength class 5, uncoated:

Nut M12-6N.5 GOST 5915-70

Hexagonal nut with thread diameter d 16 mm, with a large thread pitch with a tolerance range of 6H, strength class 6, made of A12 steel, uncoated:

Nut 2M16-6N.6.A GOST 5915-70

Nut with a thread diameter of d 20 mm, with a large thread pitch with a tolerance range of 6H, strength class 6, made of steel grade A12, uncoated:

Nut GOST 5915-70 hexagonal DIN 934

GOST 5915-70 hex nut - used in mechanical engineering and construction as connection parts.
Nut GOST 5915 analogue of DIN 934, ISO.

It is possible to supply nuts in accordance with GOST 5915-70 with fine thread pitches and in a high-strength version (strength classes 8.0 and 10.0) made of 20G2R steel.

Nut size range: M6 nut, M8 nut, M10 nut, M12 nut, M16 nut, M20 nut, M24 nut, M27 nut, M30 nut, M36 nut, M42 nut, M48 nut, M52 nut.
GOST 5915-70 hex nut. Nut weight DIN 934

Nuts according to this GOST made of steels 35, 40Х, 09G2S sizes from M4 to M42, nuts with zinc coating are made to order.

Nut price 2015. Nut GOST 5915-70 hexagonal produced by Severstal hardware OSPAZ

Specifications. GOST 5915-70 hex nut.

Can be supplied:

• with strength classes 6.0, 8.0, 10.0* from steels 20, 35, 20G2R;
• galvanized zinc coated

Example of a symbol:

Nut with thread diameter d 12 mm, with a large thread pitch, with a thread tolerance of 6H, strength class 5, uncoated:

Nut M12-6N.5 GOST 5915-70

Hexagonal nut with thread diameter d 16 mm, with a large thread pitch with a tolerance range of 6H, strength class 6, made of A12 steel, uncoated:

Nut 2M16-6N.6.A GOST 5915-70

Nut with a thread diameter of d 20 mm, with a large thread pitch with a tolerance range of 6H, strength class 6, made of steel grade A12, uncoated:

Nut 2M20-6N.6.A GOST 5915-70

Nut with a thread diameter of d 36 mm with a fine thread pitch with a tolerance range of 6H, strength class 10.9, made of steel grade 40X, with a coating of 01 with a thickness of 9 microns:

Nut 2М36X1.5-6Н.10.9 40X019 GOST 5915-70
Theoretical weight 1000 pieces, kg. Nut weight GOST 5915-70.

GOST 5915 is a domestic analogue of the GOST ISO 4032-2014 nut. ISO 4032-2014 defines the main characteristics for a hexagonal normal nut (type 1), with threads from M1.6 to M64 inclusive, accuracy class A for DM16 threads.

How to buy a high-strength hex nut GOST 5915-70 M8, M12, M10, M16, M24 at low prices:

• fill out the simple “Place an order” form at the top of the page;
• call on the phone +7;
• send your application by email;

Delivery within the Russian Federation: Moscow, St. Petersburg, Arkhangelsk, Astrakhan, Barnaul, Belgorod, Bryansk, Vladimir, Volgograd, Vologda, Voronezh, Yekaterinburg, Ivanovo, Izhevsk, Yoshkar-Ola, Kazan, Kaluga, Kirov, Kostroma, Krasnodar, Kurgan, Kursk, Lipetsk, Omsk, Orenburg, Penza, Perm, Pskov, Rostov-on-Don, Ryazan, Samara, Saransk, Saratov, Sevastopol, Simferopol, Smolensk, Stavropol, Tambov, Tver, Tomsk, Tula, Tyumen, Ulyanovsk, Ufa, Chelyabinsk, Yaroslavl, etc.

The information presented on this website contains a catalog of reference information on more than 3,000 types of metal products, is for informational purposes only, and can be used in various areas of enterprise activity.

GOST 5916-70 Low hex nut

Home»Nuts DIN, GOST»Nuts GOST» GOST 5916-70 Low hex nuts, sizes from M1 to M48

GOST 5916-70 Low hex nuts

accuracy class B with thread sizes from M1 to M48 mm. The thread complies with GOST 24705. GOST 5916-70 nuts are used for connecting and fastening parts and structures together with bolts and washers of the corresponding diameters.

Nut materials:

• Steel: 5, 6, 8, 10, 12 (strength class for nuts)
• Stainless steel: A1-A5, A2/A4-70, A2/A4-80
• Non-ferrous metals, alloys: brass, aluminum.

Coatings:

• Coated steel: galvanic galvanizing, thermal diffusion galvanizing, galvanic nickel plating, chrome plating, blued plating

Table of sizes and characteristics of hexagonal low nuts GOST 5916-70 from M1 to M10

Table of sizes and characteristics of hexagonal low nuts GOST 5916-70 from M12 to M48

According to GOST 5916-70 it is allowed to produce nuts with changed dimensions

* Nut sizes are not recommended.

Designations: d - nominal thread diameter, mm P - thread pitch, mm da - internal diameter, mm m - nut height (h14 for d ≤ 12; h15 for M12 < d ≤ M18; h16 for d > M18), mm e - circumscribed circle diameter, no less, mm dw — outer diameter, no less, mm S — spanner size, mm N — weight 1000 pcs. steel nuts (version 1) with coarse thread pitch, kg

To calculate the weight of brass nuts, multiply the values ​​from the table by 1.080; for aluminum alloy - by 0.356.

Analogues of GOST 5916-70:

DIN 439 - low hexagonal nut with a chamfer, accuracy classes A and B. DIN 936 - low hexagonal nut with a chamfer, accuracy classes A and B. ISO 4035 - low hexagonal nuts with a chamfer, accuracy classes A and B. ISO 4036 - hexagonal nuts low without chamfer, accuracy class B. ISO 8675 - low hex nuts with chamfer with metric fine threads, accuracy classes A and B.

You can order and buy hexagonal low nuts GOST 5916-70 at wholesale prices in St. Petersburg.

GOST 5927-70 hex nut M6, M8, M10, M12, M16, M20, M24, M27, M30 and others

Nut GOST 5927-70 with metric thread of accuracy class A - used in mechanical engineering and construction as connection parts.
It is possible to supply nuts in accordance with GOST 5927-70 with fine thread pitches and in a high-strength design (strength classes 8.0 and 10.0) made of 20G2R steel.

Analog of nut GOST 5927-70: DIN 934, EN ISO 4032, 4033.

Nut size range: nut M6, M8, M10, M12, M16, M20, M24, M27, M30, M36, M42, M48, M52.
GOST 5927-70 hex nut. Dimensions, weight

Nuts according to this GOST made of steels 35, 40Х, 09G2S sizes from M4 to M42, nuts with zinc coating are made to order.

Nut price 2022. Nut GOST 5927-70 hexagonal produced by Severstal.

Specifications. Hex nut GOST 5927-70 produced by OSPAZ

Can be supplied:

• with strength classes 6.0, 8.0, 10.0* from steels 20, 35, 20G2R;
• galvanized zinc coated

An example of a nut symbol GOST 5927-70

Hexagonal nut with thread diameter d 12 mm, with a large thread pitch, with a thread tolerance of 6H, strength class 5, uncoated:

Nut M12-6N.5 GOST 5927-70

Hexagonal nut with a thread diameter of d 20 mm, with a large thread pitch with a tolerance range of 6H, strength class 6, made of steel grade A12, uncoated:

Nut 2M20-6N.6.A GOST 5927-70

Hexagonal nut with a thread diameter of d 24 mm, with a fine thread pitch with a tolerance range of 6H, strength class 12, made of steel grade 40X, with a coating of 01 with a thickness of 6 microns:

Nut 2М24X1.25-6Н.12.40X016 GOST 5927-70

Hexagonal nut with a thread diameter of d 30 mm, with a fine thread pitch with a tolerance range of 6H, strength class 10.9, made of steel grade 40X, with a coating of 01 9 microns thick:

Nut 2M30X1.5-6N.10.9 40X016 GOST 5927-70
Theoretical weight of 1000 pieces, kg

GOST 5927 is a domestic analogue of the GOST ISO 4032-2014 nut. ISO 4032-2014 defines the main characteristics for a hexagonal normal nut (type 1), with threads from M1.6 to M64 inclusive, accuracy class A for DM16 threads.

How to buy a GOST 5927-70 hex nut M6, M8, M10, M12 at low prices:

• fill out the simple “Place an order” form at the top of the page;
• call on the phone +7;
• send your application by email;

Delivery within the Russian Federation: Moscow, St. Petersburg, Arkhangelsk, Astrakhan, Barnaul, Belgorod, Bryansk, Vladimir, Volgograd, Vologda, Voronezh, Yekaterinburg, Ivanovo, Izhevsk, Yoshkar-Ola, Kazan, Kaluga, Kirov, Kostroma, Krasnodar, Kurgan, Kursk, Lipetsk, Omsk, Orenburg, Penza, Perm, Pskov, Rostov-on-Don, Ryazan, Samara, Saransk, Saratov, Sevastopol, Simferopol, Smolensk, Stavropol, Tambov, Tver, Tomsk, Tula, Tyumen, Ulyanovsk, Ufa, Chelyabinsk, Yaroslavl, etc.

The information presented on this website contains a catalog of reference information on more than 3,000 types of metal products, is for informational purposes only, and can be used in various areas of enterprise activity.